NAME¶
mp3burn - burn audio CDs from MP3, Ogg Vorbis, or FLAC files
SYNOPSIS¶
mp3burn [OPTION] [mp3,ogg, and flac files]
DESCRIPTION¶
mp3burn is a simple command line tool for making audio CDs from MP3s
without filling up your disk with .wav files. It uses
Perl(1),
ogg123(1),
mpg321(1) or
mpg123(1),
cdrecord(1),
flac(1), and the
MP3::Info(3) Perl module.
OPTIONS¶
- -h, --help
- Prints out a brief help
- -m, --swap
- Manual "cdrecord -swab" option mode. Use this to disable the
automatic detection for swab mode in case it is not working correctly on
your system. (Also, please send email to <formorer@formorer.de> or
file a bug against the mp3burn package if you encounter this
problem.)
- -p, --playlist ".m3u playlist"
- Use a playlist to specify audio files to burn. Instead of (or in addition
to) listing mp3/ogg/flac files, supply a .m3u playlist (e.g., from xmms)
that contains the audio files for your CD.
Note: If you specify both a playlist and audio files, the files specified on
the command-line will be appended to the list of audio files listed in the
playlist. If a file referenced in a playlist cannot be read, it will be
skipped. Be wary of playlist editors that use relative paths - mp3burn
cannot know what path the playlist editor assumed.
- -t, --tmpdir "tmpdir"
- Put temporary files in tmpdir. Default is to use the current
directory.
- -c, --check "MMM:SS" | ATIP
- Time check: compute the total length of files to be burned and warn if
greater than MMM:SS minutes and seconds. If the value ATIP is
supplied, the total length is checked against the length available on the
CDR[W] as reported by ATIP.
Note that FLAC-encoded files are assumed to be 1 second long (until there is
an easy way to get the file duration). You will need to calculate
burn-length on your own with FLAC files.
- -d, --dummy
- Perform a "dummy" run: do everything except actually burn the CD
(uses cdrecord(1) "-dummy" option).
- -o, --cdrecord "cdrecord_opts"
- Specify the command line options for cdrecord. The quotes are required to
prevent mp3burn from parsing cdrecord(1) options. Overrides
options specified in ~/.mp3burnrc.
Example: -o "-v dev=1,0 speed=4 -swab"
- Note:
- The options -pad and -audio are added automatically, since
they are always necessary. The script also tries to detect if -swab
is needed (for example on x86 and other little-Endian platforms). cdrecord
is supposed to take care of any byte-ordering requirements specific to
your burner. (If you end up with a CD that merely sounds like static, you
most likely need to toggle use of -swab.) You should also consider
using -v so that you can watch the burn in progress. This goes for
~/.mp3burnrc also.
- -a, --atip
- Lookup the ATIP info for the device in the cdburner (using
cdrecord(1) "-atip") and then exits. This option can only
be used (successfully) in conjuction with -o.
- -M, --encoder "MP3 decoder"
- Use an MP3 decoder other than the default, which is mpg321. This is
imperative when burning tracks that have sample rates other than 44.1kHz,
and the current version of mpg321 will not decode these files. Specify the
name of the decoder to be used, e.g. mpg123-oss-3dnow; you can also
specify this in your .mp3burnrc file with $mp3decoder
= mp3decoder. (Note: Currently, the MP3 decoder must
be able to accept mpg123-style command-line arguments.)
RETURN VALUE¶
mp3burn returns 0 on success.
DIAGNOSTICS¶
- Error in .mp3burnrc:
- Perl(1) cannot parse the .mp3burnrc file. The following
example occurs when a double quote is not terminated:
bash-2.05$ sudo mp3burn -d ~/bell.ogg
String found where operator expected at (eval 10) line 7, at end of line
(Missing operator before ?)
Error in .mp3burnrc:
Can't find string terminator '"' anywhere before EOF at (eval 10) line 7.
bash-2.05$
You will experience this error if you define both $cdrecord_opts and
$mp3decoder without terminating the variable assignments with the ';'
character:
$ mp3burn -d -t /tmp Theodor_Storm_Aquis_submersus_1.mp3
Scalar found where operator expected at (eval 10) line 2, near ""-v speed=2 dev=0,3,0"
$mp3decoder"
(Missing operator before
$mp3decoder?)
Error in .mp3burnrc:
syntax error at (eval 10) line 2, near ""-v speed=2 dev=0,3,0"
$mp3decoder"
EXAMPLES¶
Write an Ogg Vorbis file from a CD-R drive,
/dev/scd0, mounted at
/mnt/scd0/ to a CD-RW drive,
/dev/scd1, called "0,1,0"
in
cdrecord(1) SCSI notation. Ensure that file is no longer than 50
minutes.
sudo(1) is used to get root permissions for
cdrecord(1).
% sudo mp3burn -c 050:00 -o "-v speed=2 dev=0,1,0" /mnt/scd0/bell.ogg
Create a
~/.mp3burnrc that prints a message before writing and uses a
different MP3 decoder than the default of mpg321.
# This is an example.
$cdrecord_opts="-v speed=2 dev=0,1,0";
$mp3decoder = "mpg123-oss-3dnow";
print "Nine seconds to slap a CD-R in the drive!\n" ;
#
# See mp3burn(3).
#
Specify an mp3decoder other than mpg321.
$ sudo mp3burn -M mpg123-esd ./rush/*mp3
FILES¶
- ~/.mp3burnrc
- In this file, you may permanently specify the cdrecord options and MP3
decoder you want to use. The format is:
$cdrecord_opts = "cdrecord options";
$mp3decoder = "some mp3 decoder";
You may place comments in this file by beginning a line with
"#".
- Note:
- The values of $cdrecord_opts and $mp3decoder in ~/.mp3burnrc are
ignored if the "-o" or "-<"command-line options are
used, respectively.
CAVEATS¶
Has not been tested extensively with Ogg Vorbis files. Ogg Vorbis files must be
in CD-DA format: i.e. 44100 samples/channel x 16 bits/sample x 2 channels.
BUGS¶
If you execute
mp3burn with root permissions, the
~/.mp3burnrc
will also be executed with root permissions.
NOTES¶
There are a number of GUI frontends for
mp3burn:
- Xmp3Burn
- http://perso.wanadoo.es/ja_recio/xmp3burn/xmp3burn.html
- Kmp3burn
- http://computer.freepage.de/kmp3burn/index.htm
- GtkMp3Burn
- http://gtkmp3burn.sourceforge.net/
SEE ALSO¶
cdrecord(1),
mpg321(1),
ogg123(1),
ogginfo(1),
flac(1),
MP3::Info(3) The
mp3burn web page is
http://mp3burn.sourceforge.net/. The Ogg Vorbis web page is
http://www.xiph.org/ogg/vorbis/. The FLAC web page is
http://flac.sourceforge.net/.
AUTHOR¶
Copyright (c) 2000 Ryan Richter. Copyright (c) 2003 Alexander Wirt
This script was written by Ryan Richter <bobort@bigfoot.com> with much
code contributed by Dan Lark <dlark@spinn.net>.
I would like to thank Dan Lark <dlark@spinn.net> for contributing the
ideas and code for most of the new features, and Tony Mancill
<tony@mancill.com> for making Debian packages and helping with
debugging.
Later in 2003 Alexander Wirt continued to write this program.
This program is licensed under the GNU General Public License. You may fold,
spindle, and mutilate this software under the terms of the GPL.
HISTORY¶
- 20031014 <formorer@formorer.de>
- Switches from standard getopt to GetOpts::Long
Updated Manpage for the new option format
- 20031012 <formorer@formorer.de>
- Updated mp3burn to use pod2usage
Added -h switch for getting help
Fixed a bug with the output of file in conduction with FLAC files
Added a gracefully exit if there are no valid files left
Use String::Shellquote to avoid problems with the shell
- 20030203 <tmancill@debian.org>
- hacked in support for FLAC, as per suggested by
<ldm@apartia.org>
- 20021110 <tmancill@debian.org>
- updated to work with new ogginfo output format in vorbis-tools 1.0;
modified slightly to not create FIFOs for invalid MP3/OGG files
- 20020728 <tmancill@debian.org>
- added -M $mp3decoder switch to support MP3 decoders
other than mpg321 and mpg123-oss
- 20010917 <tmancill@debian.org>
- added check to automatically add -swab on ia32 platform
MP3::Info(3) replaces MPEG::MP3Info
- mp3burn 0.02 10/28/00
- Changes since 0.01:
Bugfixes:
Spaces, quotes, and other shell metacharacters in filenames should no longer
problematic, since we use Shell:QuoteString to avoid problems with that
(Feedback for that is wished).
Mono MP3s and MP3s not sampled at 44.1kHz are no longer problematic.
New Features:
Editing the executable is no longer necessary; cdrecord options can be
specified on the command line or in ~/.mp3burnrc.
Temp dir for FIFOs may be set to other than the current dir.
Dummy runs now supported from the command line.
A time check is now available: mp3burn can abort if total time
exceeds a threshold. Requires MPEG::MP3Info.
Playlist support.