Scroll to navigation

STRUCT REGULATOR_OPS(9) API reference STRUCT REGULATOR_OPS(9)

NAME

struct_regulator_ops - regulator operations.

SYNOPSIS

struct regulator_ops {
  int (* list_voltage) (struct regulator_dev *, unsigned selector);
  int (* set_voltage) (struct regulator_dev *, int min_uV, int max_uV,unsigned *selector);
  int (* map_voltage) (struct regulator_dev *, int min_uV, int max_uV);
  int (* set_voltage_sel) (struct regulator_dev *, unsigned selector);
  int (* get_voltage) (struct regulator_dev *);
  int (* get_voltage_sel) (struct regulator_dev *);
  int (* set_current_limit) (struct regulator_dev *,int min_uA, int max_uA);
  int (* get_current_limit) (struct regulator_dev *);
  int (* enable) (struct regulator_dev *);
  int (* disable) (struct regulator_dev *);
  int (* is_enabled) (struct regulator_dev *);
  int (* set_mode) (struct regulator_dev *, unsigned int mode);
  unsigned int (* get_mode) (struct regulator_dev *);
  int (* enable_time) (struct regulator_dev *);
  int (* set_ramp_delay) (struct regulator_dev *, int ramp_delay);
  int (* set_voltage_time_sel) (struct regulator_dev *,unsigned int old_selector,unsigned int new_selector);
  int (* get_status) (struct regulator_dev *);
  unsigned int (* get_optimum_mode) (struct regulator_dev *, int input_uV,int output_uV, int load_uA);
  int (* set_bypass) (struct regulator_dev *dev, bool enable);
  int (* get_bypass) (struct regulator_dev *dev, bool *enable);
  int (* set_suspend_voltage) (struct regulator_dev *, int uV);
  int (* set_suspend_enable) (struct regulator_dev *);
  int (* set_suspend_disable) (struct regulator_dev *);
  int (* set_suspend_mode) (struct regulator_dev *, unsigned int mode);
};

MEMBERS

list_voltage
Return one of the supported voltages, in microvolts; zero if the selector indicates a voltage that is unusable on this system; or negative errno. Selectors range from zero to one less than regulator_desc.n_voltages. Voltages may be reported in any order.
set_voltage
Set the voltage for the regulator within the range specified. The driver should select the voltage closest to min_uV.
map_voltage
Convert a voltage into a selector
set_voltage_sel
Set the voltage for the regulator using the specified selector.
get_voltage
Return the currently configured voltage for the regulator.
get_voltage_sel
Return the currently configured voltage selector for the regulator.
set_current_limit
Configure a limit for a current-limited regulator. The driver should select the current closest to max_uA.
get_current_limit
Get the configured limit for a current-limited regulator.
enable
Configure the regulator as enabled.
disable
Configure the regulator as disabled.
is_enabled
Return 1 if the regulator is enabled, 0 if not. May also return negative errno.
set_mode
Set the configured operating mode for the regulator.
get_mode
Get the configured operating mode for the regulator.
enable_time
Time taken for the regulator voltage output voltage to stabilise after being enabled, in microseconds.
set_ramp_delay
Set the ramp delay for the regulator. The driver should select ramp delay equal to or less than(closest) ramp_delay.
set_voltage_time_sel
Time taken for the regulator voltage output voltage to stabilise after being set to a new value, in microseconds. The function provides the from and to voltage selector, the function should return the worst case.
get_status
Return actual (not as-configured) status of regulator, as a REGULATOR_STATUS value (or negative errno)
get_optimum_mode
Get the most efficient operating mode for the regulator when running with the specified parameters.
set_bypass
Set the regulator in bypass mode.
get_bypass
Get the regulator bypass mode state.
set_suspend_voltage
Set the voltage for the regulator when the system is suspended.
set_suspend_enable
Mark the regulator as enabled when the system is suspended.
set_suspend_disable
Mark the regulator as disabled when the system is suspended.
set_suspend_mode
Set the operating mode for the regulator when the system is suspended.

DESCRIPTION

This struct describes regulator operations which can be implemented by regulator chip drivers.

AUTHORS

Liam Girdwood <lrg@slimlogic.co.uk>
Author.
Mark Brown <broonie@opensource.wolfsonmicro.com>
 
Wolfson Microelectronics,
Author.

COPYRIGHT

May 2018 Kernel Hackers Manual 3.16