NAME¶
Tie::Array::Iterable - Allows creation of iterators for lists and arrays
SYNOPSIS¶
use Tie::Array::Iterable qw( quick );
my $iterarray = new Tie::Array::Iterable( 1..10 );
for( my $iter = $iterarray->start() ; !$iter->at_end() ; $iter->next() ) {
print $iter->index(), " : ", $iter->value();
if ( $iter->value() == 3 ) {
unshift @$iterarray, (11..15);
}
}
my @array = ( 1..10 );
for( my $iter = iterator_from_start( @array ) ;
!$iter->at_end() ;
$iter->next() ) { ... }
for( my $iter = iterate_from_end( @array ) ;
!$iter->at_end() ;
$iter->next() ) { ... }
DESCRIPTION¶
"Tie::Hash::Iterable" allows one to create iterators for lists and
arrays. The concept of iterators is borrowed from the C++ STL [1], in which
most of the collections have iterators, though this class does not attempt to
fully mimic it.
Typically, in C/C++ or Perl, the 'easy' way to visit each item on a list is to
use a counter, and then a for( ;; ) loop. However, this requires knowledge on
how long the array is to know when to end. In addition, if items are removed
or inserted into the array during the loop, then the counter will be incorrect
on the next run through the loop, and will cause problems.
While some aspects of this are fixed in Perl by the use of for or foreach, these
commands still suffer when items are removed or added to the array while in
these loops. Also, if one wished to use break to step out of a foreach loop,
then restart where they left at some later point, there is no way to do this
without maintaining some additional state information.
The concept of iterators is that each iterator is a bookmark to a spot,
typically considered between two elements. While there is some overhead to the
use of iterators, it allows elements to be added or removed from the list,
with the iterator adjusting appropriate, and allows the state of a list
traversal to be saved when needed.
For example, the following Perl code will drop into an endless block (this
mimics the functionality of the above code):
my @array = (0..10);
for my $i ( @a ) {
print "$i\n";
if ( $i == 3 ) { unshift @a, ( 11..15 ); }
}
However, the synopsis code will not be impaired when the unshift operation is
performed; the iteration will simply continue at the next element, being 4 in
this case.
Tie::Array::Iterable does this by first tying the desired list to this class as
well as blessing it in order to give it functionality. When a new iterator is
requested via the iterable array object, a new object is generated from either
Tie::Array::Iterable::ForwardIterator or
Tie::Array::Iterable::BackwardIterator. These objects are then used in
associated for loops to move through the array and to access values. When
changes in the positions of elements of the initial array are made, the tied
variable does the appropriate bookkeeping with any iterators that have been
created to make sure they point to the appropriate elements.
Note that the iterable array object is also a tied array, and thus, you can use
all standard array operations on it (with arrow notation due to the reference,
of course).
The logic behind how iterators will 'move' depending on actions are listed here.
Given the list
0 1 2 3 4 5 6 7 8 9 10
^
Forward iterator current position
Several possible cases can be considered:
- unshift
- If an item was unshifted on the list, thus pushing all elements to the
right, the iterator will follow this and will still point to 5.
- shift
- Removing an item from the start of the list will push all elements to the
left, and the iterator again will follow and point to 5.
- pop, push
- Since these affect the list after the position of the iterator, there is
no change in the iterator at this time. However, an iterator that is at
the end of the list will pass over these new elements if it is moved
backwards though the list.
- splice 3, 4, ()
- If the array is spliced from 3 to 6, then the position that the iterator
is at is invalid, and is pushed back to the last 'valid' entry, this being
between 2 and 7 after the splice and pointing to 7.
- splice 3, 4, ( 11, 12, 13 )
- Even though we are adding new data, this is similar to the situation
above, and the iterator will end up pointing at 11, sitting between 2 and
11.
- splice 4, 0, ( 11, 12, 13 )
- This will push extra data between 3 and 4, but does not affect the
position of the iteration, which will still point at 5.
- splice 5, 0, ( 11, 12, 13 )
- Because the data is now being pushed between 4 and 5, this will affect the
iterator, and the iterator will now point at 11.
- splice 0, 6
- Remove all data from the head to the iterator position will result it in
being at the leftmost part of the array, and will be pointing at 7.
This is only for the forward iterator; the backwards iterator would work
similarly.
PACKAGE METHODS¶
- new( [<array>] )
- Creates a new iterable array object; this is returned as a reference to an
array. If an array is passed, then the iterable array is set up to use
this array as storage.
- iterate_from_start( <list> )
- Returns a forward iterator that can be used to iterator over the given
list. This allows one to avoid explicitly creating the iterable array
object first, though one still is created for this purpose.
- iterate_from_end( <list> )
- Returns a backwards iterator that can be used to iterate over the given
list.
- iterate_forward_from( <int>, <list> )
- Returns a forward iterator for the given list set at the indicated
position.
- iterate_backward_from( <int>, <list> )
- Returns a backward iterator for the given list set at the indicated
position.
CLASS METHODS¶
- from_start( )
- Returns a new forward iterator set at the start of the array. Parentheses
are not required.
- from_end( )
- Returns a new backward iterator set at the end of the array. Parentheses
are not required.
- forward_from ([<int>])
- Returns a new forward iterator set at the indicated position (or at the
start of the array if no value is passed).
- backward_from ([<int>])
- Returns a new backward iterator set at the indicated position (or at the
end of the array if no value is passed).
- clear_iterators( )
- This function was previously used to clear references that might
accumulate; however, this functionality has been fixed, and this function
does nothing besides return a true value.
ITERATOR METHODS¶
The iterators that are generated by the functions above have the following
functions associated with them.
- value()
- Returns the current value from the array where the iterator is pointing,
or undef if the iterator is at the end.
- set_value( <value> )
- Sets the value of the array where the iterator is currently positions to
the passed value. This will do nothing if the iterator is at the end of
the array.
- index()
- Returns the index in the array where the iterator is currently
pointing.
- set_index( <pos> )
- Moves the iterator to this position in the array.
- at_end()
- Returns true if the iterator is pointing at the end position (at the end
of the array for a Forward iterator, at the start of the array for the
Backward iterator), false otherwise. Parentheses are not required.
- at_start()
- Returns true if the iterator is pointing at the start position (at the
beginning of the array for a Forward iterator, at the end of the array for
the Backward iterator), false otherwise. Parentheses are not
required.
- next()
- Advances the iterator to the next position; the value of this new position
is returned as per "value()". This will not move past the end
position. Parentheses are not required.
- prev()
- Advances the iterator to the previous position; the value of this new
position is returned as per "value()". This will not move past
the starting position. Parentheses are not required.
- to_end()
- Advances the iterator to the very end position. Note that this is the
undefined state, and the only way to resume traversal is to move to
preceding elements. Also note that for a backwards iterator, this means to
move to the beginning of the array. Parentheses are not required.
- to_start()
- Advances the iterator back to the starting position for the iterator.
Again, for a backwards iterator, this means moving to the end of the list.
Parentheses are not required.
- forward( [<int>] )
- Advances the iterator in the forward direction the number of steps passed,
or just 1 if no value is passed (and thus acting like
"next()").
- backward( [<int>] )
- Advances the iterator in the backward direction the number of steps
passed, or just 1 if no value is passed (and thus acting like
"prev()").
EXPORT¶
The 'quick' export will export "iterate_from_start",
"iterate_from_end", "iterate_forward_from", and
"iterate_backward_from" functions into the global namespace.
Optionally, you may import these functions individually.
CAVAETS¶
You should not directly tie your array to this class, nor use the
ForwardIterator or BackwardIterator classes directly. There are factory-like
methods for these classes that you should use instead.
You might run in to trouble if you use more than MAXINT (typically 2^32 on most
32-bit machines) iterators during a single instance of the program. If this is
a practical concern, please let me know; that can be fixed though with some
time consumption.
AUTHOR¶
Michael K. Neylon <mneylon-pm@masemware.com>
ACKNOWLEDGEMENTS¶
I'd like to thank Chip Salzenberg for a useful suggesting in helping to remove
the reference problem without having to resort to weak references on
Perlmonks.
REFERENCES¶
[1] A reference guide to the C++ STL can be found at
http://www.cs.rpi.edu/projects/STL/htdocs/stl.html
COPYRIGHT¶
Copyright 2001 by Michael K. Neylon <mneylon-pm@masemware.com>.
This program is free software; you can redistribute it and/or modify it under
the same terms as Perl itself.
See
http://www.perl.com/perl/misc/Artistic.html