NAME¶
SNMP::Info::SONMP - SNMP Interface to SynOptics Network Management Protocol
(SONMP)
AUTHOR¶
Eric Miller
SYNOPSIS¶
my $sonmp = new SNMP::Info (
AutoSpecify => 1,
Debug => 1,
DestHost => 'router',
Community => 'public',
Version => 2
);
my $class = $sonmp->class();
print " Using device sub class : $class\n";
$hassonmp = $sonmp->hasSONMP() ? 'yes' : 'no';
# Print out a map of device ports with CDP neighbors:
my $interfaces = $sonmp->interfaces();
my $sonmp_if = $sonmp->sonmp_if();
my $sonmp_ip = $sonmp->sonmp_ip();
my $sonmp_port = $sonmp->sonmp_port();
foreach my $sonmp_key (keys %$sonmp_ip){
my $iid = $sonmp_if->{$sonmp_key};
my $port = $interfaces->{$iid};
my $neighbor = $sonmp_ip->{$sonmp_key};
my $neighbor_port = $sonmp_port->{$sonmp_key};
print "Port : $port connected to $neighbor / $neighbor_port\n";
}
DESCRIPTION¶
SNMP::Info::SONMP is a subclass of SNMP::Info that provides an object oriented
interface to the SynOptics Network Management Protocol (SONMP) information
through SNMP.
SONMP is a Layer 2 protocol that supplies topology information of devices that
also speak SONMP, mostly switches and hubs. SONMP is implemented in SynOptics,
Bay, Nortel, and Avaya devices. SONMP has been rebranded by Bay then Nortel
and may be referred to by several different names, including Nortel Discovery
Protocol (NDP).
Create or use a device subclass that inherits this class. Do not use directly.
Each device implements a subset of the global and cache entries. Check the
return value to see if that data is held by the device.
Inherited Classes¶
None.
Required MIBs¶
- SYNOPTICS-ROOT-MIB
- S5-ETH-MULTISEG-TOPOLOGY-MIB
GLOBAL METHODS¶
These are methods that return scalar values from SNMP
- $sonmp->index_factor()
- Returns a number representing the number of ports reserved per slot or
switch within the device MIB. Defaults to 32.
- $sonmp->slot_offset()
- Returns the offset if slot numbering does not start at 0. Defaults to
1.
- $sonmp->port_offset()
- Returns the offset if port numbering does not start at 0. Defaults to
0.
- $sonmp->hasSONMP()
- Is SONMP is active in this device?
- $sonmp->sonmp_gid()
- Returns the IP that the device is sending out for its Nmm topology info.
("s5EnMsTopIpAddr")
- $sonmp->sonmp_run()
- Returns true if SONMP is on for this device.
("s5EnMsTopStatus")
- $sonmp->mac()
- Returns MAC of the advertised IP address of the device.
TABLE METHODS¶
These are methods that return tables of information in the form of a reference
to a hash.
Layer2 Topology info ("s5EnMsTopNmmTable")¶
- $sonmp->sonmp_topo_slot()
- Returns reference to hash. Key: Table entry, Value:slot number
("s5EnMsTopNmmSlot")
- $sonmp->sonmp_topo_port()
- Returns reference to hash. Key: Table entry, Value:Port Number (interface
iid)
("s5EnMsTopNmmPort")
- $sonmp->sonmp_topo_ip()
- Returns reference to hash. Key: Table entry, Value:Remote IP address of
entry
("s5EnMsTopNmmIpAddr")
- $sonmp->sonmp_topo_seg()
- Returns reference to hash. Key: Table entry, Value:Remote Segment ID
("s5EnMsTopNmmSegId")
- $sonmp->sonmp_topo_mac()
- ("s5EnMsTopNmmMacAddr")
Returns reference to hash. Key: Table entry, Value:Remote MAC address
- $sonmp->sonmp_topo_platform
- Returns reference to hash. Key: Table entry, Value:Remote Device Type
("s5EnMsTopNmmChassisType")
- $sonmp->sonmp_topo_localseg
- Returns reference to hash. Key: Table entry, Value: Boolean, if
bay_topo_seg() is local.
("s5EnMsTopNmmLocalSeg")
All entries with port=0 are local and ignored.
- $sonmp->sonmp_if()
- Returns reference to hash. Key: IID, Value: Local port (interfaces)
- $sonmp->sonmp_ip()
- Returns reference to hash. Key: IID, Value: Remote IP address
If multiple entries exist with the same local port, sonmp_if(), with
different IPv4 addresses, sonmp_ip(), there is either a non SONMP
device in between two or more devices or multiple devices which are not
directly connected.
Use the data from the Layer2 Topology Table below to dig deeper.
- $sonmp->sonmp_port()
- Returns reference to hash. Key: IID, Value: Remote port (interfaces)
- $sonmp->sonmp_platform()
- Returns reference to hash. Key: IID, Value: Remote device type