NAME¶
sane-nec - SANE backend for NEC scanners
DESCRIPTION¶
The
sane-nec library implements a SANE (Scanner Access Now Easy) backend
that provides access to NEC SCSI scanners. This backend should be considered
alpha-quality software! In the current state it is known to work with
PC-IN500/4C scanners. Another MultiReader scanner series is not supported.
PC-IN 500/4C and MultiReader scanner are only sold in Japan.(except Multi
Reader PetiScan.)
For other scanners, it may or may not work.
The backend has the following known problems:
- ColorLineart mode is not supported.
- device name is fixed to /dev/scanner
At present, the following scanners are known to work with this backend.
Vendor Product id
------ -----------
NEC PC-IN500/4C
FILES¶
- /etc/sane.d/nec.conf
- The backend configuration file.
- /usr/lib/arch_triplet/sane/libsane-nec.a
- The static library implementing this backend.
- /usr/lib/arch_triplet/sane/libsane-nec.so
- The shared library implementing this backend (present on systems that
support dynamic loading).
ENVIRONMENT¶
- SANE_DEBUG_NEC
- If the library was compiled with debug support enabled, this environment
variable controls the debug level for this backend. E.g., a value of 128
requests all debug output to be printed. Smaller levels reduce
verbosity.
SEE ALSO¶
sane(7),
sane-scsi(5)
AUTHORS¶
Kazuya Fukuda