NAME¶
Image::ExifTool::MIE - Read/write MIE meta information
SYNOPSIS¶
This module is used by Image::ExifTool
DESCRIPTION¶
This module contains routines required by Image::ExifTool to read and write
information in MIE files.
WHAT IS MIE?¶
MIE stands for "Meta Information Encapsulation". The MIE format is an
extensible, dedicated meta information format which supports storage of binary
as well as textual meta information. MIE can be used to encapsulate meta
information from many sources and bundle it together with any type of file.
Features¶
Below is very subjective score card comparing the features of a number of common
file and meta information formats, and comparing them to MIE. The following
features are rated for each format with a score of 0 to 10:
1) Extensible (can incorporate user-defined information).
2) Meaningful tag ID's (hint to meaning of unknown information).
3) Sequential read/write ability (streamable).
4) Hierarchical information structure.
5) Easy to implement reader/writer/editor.
6) Order of information well defined.
7) Large data lengths supported: >64kB (+5) and >4GB (+5).
8) Localized text strings.
9) Multiple documents in a single file.
10) Compact format doesn't squander disk space or bandwidth.
11) Compressed meta information supported.
12) Relocatable data elements (ie. no fixed offsets).
13) Binary meta information (+7) with variable byte order (+3).
14) Mandatory tags not required (an unnecessary complication).
15) Append information to end of file without editing.
Feature number Total
Format 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Score
------ --------------------------------------------- -----
MIE 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 150
PDF 10 10 0 10 0 0 10 0 10 10 10 0 7 10 10 97
PNG 10 10 10 0 8 0 5 10 0 10 10 10 0 10 0 93
XMP 10 10 10 10 2 0 10 10 10 0 0 10 0 10 0 92
AIFF 0 5 10 10 10 0 5 0 0 10 0 10 7 10 0 77
RIFF 0 5 10 10 10 0 5 0 0 10 0 10 7 10 0 77
JPEG 10 0 10 0 10 0 0 0 0 10 0 10 7 10 0 67
EPS 10 10 10 0 0 0 10 0 10 0 0 5 0 10 0 65
CIFF 0 0 0 10 10 0 5 0 0 10 0 10 10 10 0 65
TIFF 0 0 0 10 5 10 5 0 10 10 0 0 10 0 0 60
EXIF 0 0 0 10 5 10 0 0 0 10 0 0 10 0 0 45
IPTC 0 0 10 0 8 0 0 0 0 10 0 10 7 0 0 45
By design, MIE ranks highest by a significant margin. Other formats with
reasonable scores are PDF, PNG and XMP, but each has significant weak points.
What may be surprising is that TIFF, EXIF and IPTC rank so low.
As well as scoring high in all these features, the MIE format has the unique
ability to encapsulate any other type of file, and provides a non-invasive
method of adding meta information to a file. The meta information is logically
separated from the original file data, which is extremely important because
meta information is routinely lost when files are edited.
Also, the MIE format supports multiple files by simple concatenation, enabling
all kinds of wonderful features such as linear databases, edit histories or
non-intrusive file updates. This ability can also be leveraged to allow
MIE-format trailers to be added to some other file types.
File Structure¶
A MIE file consists of a series of MIE elements. A MIE element may contain
either data or a group of MIE elements, providing a hierarchical format for
storing data. Each MIE element is identified by a human-readable tag name, and
may store data from zero to 2^64-1 bytes in length.
File Signature¶
The first element in the MIE file must be an uncompressed MIE group element with
a tag name of "0MIE". This restriction allows the first 8 bytes of a
MIE file to be used to identify a MIE format file. The following table lists
the two possible initial byte sequences for a MIE-format file (the first for
big-endian, and the second for little-endian byte ordering):
Byte Number: 0 1 2 3 4 5 6 7
C Characters: ~ \x10 \x04 ? 0 M I E
or ~ \x18 \x04 ? 0 M I E
Hexadecimal: 7e 10 04 ? 30 4d 49 45
or 7e 18 04 ? 30 4d 49 45
Decimal: 126 16 4 ? 48 77 73 69
or 126 24 4 ? 48 77 73 69
Note that byte 1 may have one of the two possible values (0x10 or 0x18), and
byte 3 may have any value (0x00 to 0xff).
Element Structure¶
1 byte SyncByte = 0x7e (decimal 126, character '~')
1 byte FormatCode (see below)
1 byte TagLength (T)
1 byte DataLength (gives D if DataLength < 253)
T bytes TagName (T given by TagLength)
2 bytes DataLength2 [exists only if DataLength == 255 (0xff)]
4 bytes DataLength4 [exists only if DataLength == 254 (0xfe)]
8 bytes DataLength8 [exists only if DataLength == 253 (0xfd)]
D bytes DataBlock (D given by DataLength)
The minimum element length is 4 bytes (for a group terminator). The maximum
DataBlock size is 2^64-1 bytes. TagLength and DataLength are unsigned
integers, and the byte ordering for multi-byte DataLength fields is specified
by the containing MIE group element. The SyncByte is byte aligned, so no
padding is added to align on an N-byte boundary.
FormatCode
The format code is a bitmask that defines the format of the data:
7654 3210
++++ ---- FormatType
---- +--- TypeModifier
---- -+-- Compressed
---- --++ FormatSize
- FormatType (bitmask 0xf0):
-
0x00 - other (or unknown) data
0x10 - MIE group
0x20 - text string
0x30 - list of null-separated text strings
0x40 - integer
0x50 - rational
0x60 - fixed point
0x70 - floating point
0x80 - free space
- TypeModifier (bitmask 0x08):
- Modifies the meaning of certain FormatTypes (0x00-0x60):
0x08 - other data sensitive to MIE group byte order
0x18 - MIE group with little-endian byte ordering
0x28 - UTF encoded text string
0x38 - UTF encoded text string list
0x48 - signed integer
0x58 - signed rational (denominator is always unsigned)
0x68 - signed fixed-point
- Compressed (bitmask 0x04):
- If this bit is set, the data block is compressed using Zlib deflate. An
entire MIE group may be compressed, with the exception of file-level
groups.
- FormatSize (bitmask 0x03):
- Gives the byte size of each data element:
0x00 - 8 bits (1 byte)
0x01 - 16 bits (2 bytes)
0x02 - 32 bits (4 bytes)
0x03 - 64 bits (8 bytes)
The number of bytes in a single value for this format is given by
2**FormatSize (or 1 << FormatSize). The number of values is the data
length divided by this number of bytes. It is an error if the data length
is not an even multiple of the format size in bytes.
The following is a list of all currently defined MIE FormatCode values for
uncompressed data (add 0x04 to each value for compressed data):
0x00 - other data (insensitive to MIE group byte order) (1)
0x01 - other 16-bit data (may be byte swapped)
0x02 - other 32-bit data (may be byte swapped)
0x03 - other 64-bit data (may be byte swapped)
0x08 - other data (sensitive to MIE group byte order) (1)
0x10 - MIE group with big-endian values (1)
0x18 - MIE group with little-endian values (1)
0x20 - ASCII (ISO 8859-1) string (2,3)
0x28 - UTF-8 string (2,3,4)
0x29 - UTF-16 string (2,3,4)
0x2a - UTF-32 string (2,3,4)
0x30 - ASCII (ISO 8859-1) string list (3,5)
0x38 - UTF-8 string list (3,4,5)
0x39 - UTF-16 string list (3,4,5)
0x3a - UTF-32 string list (3,4,5)
0x40 - unsigned 8-bit integer
0x41 - unsigned 16-bit integer
0x42 - unsigned 32-bit integer
0x43 - unsigned 64-bit integer (6)
0x48 - signed 8-bit integer
0x49 - signed 16-bit integer
0x4a - signed 32-bit integer
0x4b - signed 64-bit integer (6)
0x52 - unsigned 32-bit rational (16-bit numerator then denominator) (7)
0x53 - unsigned 64-bit rational (32-bit numerator then denominator) (7)
0x5a - signed 32-bit rational (denominator is unsigned) (7)
0x5b - signed 64-bit rational (denominator is unsigned) (7)
0x61 - unsigned 16-bit fixed-point (high 8 bits is integer part) (8)
0x62 - unsigned 32-bit fixed-point (high 16 bits is integer part) (8)
0x69 - signed 16-bit fixed-point (high 8 bits is signed integer) (8)
0x6a - signed 32-bit fixed-point (high 16 bits is signed integer) (8)
0x72 - 32-bit IEEE float (not recommended for portability reasons)
0x73 - 64-bit IEEE double (not recommended for portability reasons) (6)
0x80 - free space (value data does not contain useful information)
Notes:
- 1.
- The byte ordering specified by the MIE group TypeModifier applies to the
MIE group element as well as all elements within the group. Data for all
FormatCodes except 0x08 (other data, sensitive to byte order) may be
transferred between MIE groups with different byte order by byte swapping
the uncompressed data according to the specified data format. The
following list illustrates the byte-swapping pattern, based on FormatSize,
for all format types except rational (FormatType 0x50).
FormatSize Change in Byte Sequence
-------------- -----------------------------------
0x00 (8 bits) 0 1 2 3 4 5 6 7 --> 0 1 2 3 4 5 6 7 (no change)
0x01 (16 bits) 0 1 2 3 4 5 6 7 --> 1 0 3 2 5 4 7 6
0x02 (32 bits) 0 1 2 3 4 5 6 7 --> 3 2 1 0 7 6 5 4
0x03 (64 bits) 0 1 2 3 4 5 6 7 --> 7 6 5 4 3 2 1 0
Rational values consist of two integers, so they are swapped as the next
lower FormatSize. For example, a 32-bit rational (FormatSize 0x02, and
FormatCode 0x52 or 0x5a) is swapped as two 16-bit values (ie. as if it had
FormatSize 0x01).
- 2.
- The TagName of a string element may have an 6-character suffix to indicate
a specific locale. (eg. "Title-en_US", or
"Keywords-de_DE").
- 3.
- Text strings are not normally null terminated, however they may be padded
with one or more null characters to the end of the data block to allow
strings to be edited within fixed-length data blocks. Newlines in the text
are indicated by a single LF (0x0a) character.
- 4.
- UTF strings must not begin with a byte order mark (BOM) since the byte
order and byte size are specified by the MIE format. If a BOM is found, it
should be treated as a zero-width non-breaking space.
- 5.
- A list of text strings separated by null characters. These lists must not
be null padded or null terminated, since this would be interpreted as
additional zero-length strings. For ASCII and UTF-8 strings, the null
character is a single zero (0x00) byte. For UTF-16 or UTF-32 strings, the
null character is 2 or 4 zero bytes respectively.
- 6.
- 64-bit integers and doubles are subject to the specified byte ordering for
both 32-bit words and bytes within these words. For instance, the high
order byte is always the first byte if big-endian, and the eighth byte if
little-endian. This means that some swapping is always necessary for these
values on systems where the byte order differs from the word order (eg.
some ARM systems), regardless of the endian-ness of the stored
values.
- 7.
- Rational values are treated as two separate integers. The numerator always
comes first regardless of the byte ordering. In a signed rational value,
only the numerator is signed. The denominator of all rational values is
unsigned (eg. a signed 64-bit rational of 0x80000000/0x80000000 evaluates
to -1, not +1).
- 8.
- 32-bit fixed point values are converted to floating point by treating them
as an integer and dividing by an appropriate value. eg)
16-bit fixed value = 16-bit integer value / 256.0
32-bit fixed value = 32-bit integer value / 65536.0
TagLength
Gives the length of the TagName string. Any value between 0 and 255 is valid,
but the TagLength of 0 is valid only for the MIE group terminator.
DataLength
DataLength is an unsigned byte that gives the number of bytes in the data block.
A value between 0 and 252 gives the data length directly, and numbers from 253
to 255 are reserved for extended DataLength codes. Codes of 255, 254 and 253
indicate that the element contains an additional 2, 4 or 8 byte unsigned
integer representing the data length.
0-252 - length of data block
255 (0xff) - use DataLength2
254 (0xfe) - use DataLength4
253 (0xfd) - use DataLength8
A DataLength of zero is valid for any element except a compressed MIE group. A
zero DataLength for an uncompressed MIE group indicates that the group length
is unknown. For other elements, a zero length indicates there is no associated
data. A terminator element must have a DataLength of 0, 6 or 10, and may not
use an extended DataLength.
TagName
The TagName string is 0 to 255 bytes long, and is composed of the ASCII
characters A-Z, a-z, 0-9 and underline ('_'). Also, a dash ('-') is used to
separate the language/country code in the TagName of a localized text string,
and a units string (possibly containing other ASCII characters) may be appear
in brackets at the end of the TagName. The TagName string is NOT null
terminated. A MIE element with a tag string of zero length is reserved for the
group terminator.
MIE elements are sorted alphabetically by TagName within each group. Multiple
elements with the same TagName are allowed, even within the same group.
TagNames should be meaningful. Case is significant. Words should be lowercase
with an uppercase first character, and acronyms should be all upper case. The
underline ("_") is provided to allow separation of two acronyms or
two numbers, but it shouldn't be used unless necessary. No separation is
necessary between an acronym and a word (eg. "ISOSetting").
All TagNames should start with an uppercase letter. An exception to this rule
allows tags to begin with a digit (0-9) if they must come before other tags in
the sort order, or a lowercase letter (a-z) if they must come after. For
instance, the '0Type' element begins with a digit so it comes before, and the
'data' element begins with a lowercase letter so that it comes after meta
information tags in the main "0MIE" group.
Tag names for localized text strings have an 6-character suffix with the
following format: The first character is a dash ('-'), followed by a
2-character lower case ISO 639-1 language code, then an underline ('_'), and
ending with a 2-character upper case ISO 3166-1 alpha 2 country code. (eg.
"-en_US", "-en_GB", "-de_DE" or
"-fr_FR". Note that "GB", and not "UK" is the
code for Great Britain, although "UK" should be recognized for
compatibility reasons.) The suffix is included when sorting the tags
alphabetically, so the default locale (with no tag-name suffix) always comes
first. If the country is unknown or not applicable, a country code of
"XX" should be used.
Tags with numerical values may allow units of measurement to be specified. The
units string is stored in brackets at the end of the tag name, and is composed
of zero or more ASCII characters in the range 0x21 to 0x7d, excluding the
bracket characters 0x28 and 0x29. (eg. "Resolution(/cm)" or
"SpecificHeat(J/kg.K)".) See Image::ExifTool::MIEUnits for details.
Unit strings are not localized, and may not be used in combination with
localized text strings.
Sets of tags which would require a common prefix should be added in a separate
MIE group instead of adding the prefix to all tag names. For example, instead
of these TagName's:
ExternalFlashType
ExternalFlashSerialNumber
ExternalFlashFired
one would instead designate a separate "ExternalFlash" MIE group to
contain the following elements:
Type
SerialNumber
Fired
DataLength2/4/8
These extended DataLength fields exist only if DataLength is 255, 254 or 253,
and are respectively 2, 4 or 8 byte unsigned integers giving the data block
length. One of these values must be used if the data block is larger than 252
bytes, but they may be used if desired for smaller blocks too (although this
may add a few unnecessary bytes to the MIE element).
DataBlock
The data value for the MIE element. The format of the data is given by the
FormatCode. For MIE group elements, the data includes all contained elements
and the group terminator.
MIE groups¶
All MIE data elements must be contained within a group. A group begins with a
MIE group element, and ends with a group terminator. Groups may be nested in a
hierarchy to arbitrary depth.
A MIE group element is identified by a format code of 0x10 (big endian byte
ordering) or 0x18 (little endian). The group terminator is distinguished by a
zero TagLength (it is the only element allowed to have a zero TagLength), and
has a FormatCode of 0x00.
The MIE group element is permitted to have a zero DataLength only if the data is
uncompressed. This special value indicates that the group length is unknown
(otherwise the minimum value for DataLength is 4, corresponding the the
minimum group size which includes a terminator of at least 4 bytes). If
DataLength is zero, all elements in the group must be parsed until the group
terminator is found. If non-zero, DataLength includes the length of all
elements contained within the group, including the group terminator. Use of a
non-zero DataLength is encouraged because it allows readers quickly skip over
entire MIE groups. For compressed groups DataLength must be non-zero, and is
the length of the compressed group data (which includes the compressed group
terminator).
Group Terminator
The group terminator has a FormatCode and TagLength of zero. The terminator
DataLength must be 0, 6 or 10 bytes, and extended DataLength codes may not be
used. With a zero DataLength, the byte sequence for a terminator is "7e
00 00 00" (hex). With a DataLength of 6 or 10 bytes, the terminator data
block contains information about the length and byte ordering of the preceding
group. This additional information is recommended for file-level groups, and
is used in multi-document MIE files and MIE trailers to allow the file to be
scanned backwards from the end. (This may also allow some documents to be
recovered if part of the file is corrupted.) The structure of this optional
terminator data block is as follows:
4 or 8 bytes GroupLength (unsigned integer)
1 byte ByteOrder (0x10 or 0x18, same as MIE group)
1 byte GroupLengthSize (0x04 or 0x08)
The ByteOrder and GroupLengthSize values give the byte ordering and size of the
GroupLength integer. The GroupLength value is the total length of the entire
MIE group ending with this terminator, including the opening MIE group element
and the terminator itself.
File-level MIE groups
File-level MIE groups may NOT be compressed.
All elements in a MIE file are contained within a special group with a TagName
of "0MIE". The purpose of the "OMIE" group is to provide a
unique signature at the start of the file, and to encapsulate information
allowing files to be easily combined. The "0MIE" group must be
terminated like any other group, but it is recommended that the terminator of
a file-level group include the optional data block (defined above) to provide
information about the group length and byte order.
It is valid to have more than one "0MIE" group at the file level,
allowing multiple documents in a single MIE file. Furthermore, the MIE
structure enables multi-document files to be generated by simply concatenating
two or more MIE files.
Scanning Backwards through a MIE File¶
The steps below give an algorithm to quickly locate the last document in a MIE
file:
- 1.
- Read the last 10 bytes of the file. (Note that a valid MIE file may be as
short as 12 bytes long, but a file this length contains only an an empty
MIE group.)
- 2.
- If the last byte of the file is zero, then it is not possible to scan
backward through the file, so the file must be scanned from the beginning.
Otherwise, proceed to the next step.
- 3.
- If the last byte is 4 or 8, the terminator contains information about the
byte ordering and length of the group. Otherwise, stop here because this
isn't a valid MIE file.
- 4.
- The next-to-last byte must be either 0x10 indicating big-endian byte
ordering or 0x18 for little-endian ordering, otherwise this isn't a valid
MIE file.
- 5.
- The value of the preceding 4 or 8 bytes gives the length of the complete
file-level MIE group (GroupLength). This length includes both the leading
MIE group element and the terminator element itself. The value is an
unsigned integer with a byte length given in step 3), and a byte order
from step 4). From the current file position (at the end of the data read
in step 1), seek backward by this number of bytes to find the start of the
MIE group element for this document.
This algorithm may be repeated again beginning at this point in the file to
locate the next-to-last document, etc.
The table below lists all 5 valid patterns for the last 14 bytes of a file-level
MIE group, with all numbers in hex. The comments indicate the length and byte
ordering of GroupLength (xx) if available:
?? ?? ?? ?? ?? ?? ?? ?? ?? ?? 7e 00 00 00 - (no GroupLength)
?? ?? ?? ?? 7e 00 00 06 xx xx xx xx 10 04 - 4 bytes, big endian
?? ?? ?? ?? 7e 00 00 06 xx xx xx xx 18 04 - 4 bytes, little endian
7e 00 00 0a xx xx xx xx xx xx xx xx 10 08 - 8 bytes, big endian
7e 00 00 0a xx xx xx xx xx xx xx xx 18 08 - 8 bytes, little endian
Trailer Signature¶
The MIE format may be used for trailer information appended to other types of
files. When this is done, a signature must appear at the end of the main MIE
group to uniquely identify the MIE format trailer. To achieve this, a
"zmie" trailer signature is written as the last element in the main
"0MIE" group. This element has a FormatCode of 0, a TagLength of 4,
a DataLength of 0, and a TagName of "zmie". With this signature, the
hex byte sequence "7e 00 04 00 7a 6d 69 65" appears immediately
before the final group terminator, and the last 22 bytes of the trailer
correspond to one of the following 4 patterns (where the trailer length is
given by "xx", as above):
?? ?? ?? ?? 7e 00 04 00 7a 6d 69 65 7e 00 00 06 xx xx xx xx 10 04
?? ?? ?? ?? 7e 00 04 00 7a 6d 69 65 7e 00 00 06 xx xx xx xx 18 04
7e 00 04 00 7a 6d 69 65 7e 00 00 0a xx xx xx xx xx xx xx xx 10 08
7e 00 04 00 7a 6d 69 65 7e 00 00 0a xx xx xx xx xx xx xx xx 18 08
Note that the zero-DataLength terminator may not be used here because the
trailer length must be known for seeking backwards from the end of the file.
Multiple trailers may be appended to the same file using this technique.
MIE Data Values¶
MIE data values for a given tag are usually not restricted to a specific
FormatCode. Any value may be represented in any appropriate format, including
numbers represented in string (ASCII or UTF) form.
It is preferred that closely related values with the same format are written to
a single tag instead of using multiple tags. This improves localization of
like values and decreases MIE element overhead. For instance, instead of
separate ImageWidth and ImageHeight tags, a single ImageSize tag is defined.
Tags which may take on a discrete set of values should have meaningful values if
possible. This improves the extensibility of the format and allows a more
reasonable interpretation of unrecognized values.
Numerical Representation
Integer and floating point numbers may be represented in binary or string form.
In string form, integers are a series of digits with an optional leading sign
(eg. "[+|-]DDDDDD"), and multiple values are separated by a single
space character (eg. "23 128 -32"). Floating point numbers are
similar but may also contain a decimal point and/or a signed exponent with a
leading 'e' character (eg. "[+|-]DD[.DDDDDD][e(+|-)EEE]"). The
string "inf" is used to represent infinity. One advantage of
numerical strings is that they can have an arbitrarily high precision because
the possible number of significant digits is virtually unlimited.
Note that numerical values may have associated units of measurement which are
specified in the "TagName" string.
Date/Time Format
All MIE dates are strings in the form "YYYY:mm:dd HH:MM:SS.ss+HH:MM".
The fractional seconds (".ss") are optional, and if included may
contain any number of significant digits (unlike all other fields which are a
fixed number of digits and must be padded with leading zeros if necessary).
The timezone ("+HH:MM" or "-HH:MM") is recommended but not
required. If not given, the local system timezone is assumed.
MIME Type¶
The basic MIME type for a MIE file is "application/x-mie", however the
specific MIME type depends on the type of subfile, and is obtained by adding
"x-mie-" to the MIME type of the subfile. For example, with a
subfile of type "image/jpeg", the MIE file MIME type is
"image/x-mie-jpeg". But note that the "x-" is not
duplicated if the subfile MIME type already starts with "x-". So a
subfile with MIME type "image/x-raw" is contained within a MIE file
of type "image/x-mie-raw", not "image/x-mie-x-raw". In the
case of multiple documents in a MIE file, the MIME type is taken from the
first document. Regardless of the subfile type, all MIE-format files should
have a filename extension of ".MIE".
Levels of Support¶
Basic MIE reader/writer applications may choose not to provide support for some
advanced features of the MIE format. Features which may not be supported by
all software are:
- Compression
- Software not supporting compression must ignore compressed elements and
groups, but should be able to process the remaining information.
- Large data lengths
- Some software may limit the maximum size of a MIE group or element.
Historically, a limit of 2GB may be imposed by some systems. However,
8-byte data lengths should be supported by all applications provided the
value doesn't exceed the system limit. (eg. For systems with a 2GB limit,
8-byte data lengths should be supported if the upper 17 bits are all
zero.) If a data length above the system limit is encountered, it may be
necessary for the application to stop processing if it can not seek to the
next element in the file.
EXAMPLES¶
This section gives examples for working with MIE information using ExifTool.
The following command encapsulates any file recognized by ExifTool inside a MIE
file, and initializes MIE tags from information within the file:
exiftool -o new.mie -tagsfromfile FILE '-mie:all<all' \
'-subfilename<filename' '-subfiletype<filetype' \
'-subfilemimetype<mimetype' '-subfiledata<=FILE'
where "FILE" is the name of the file.
For unrecognized files, this command may be used:
exiftool -o new.mie -subfilename=FILE -subfiletype=TYPE \
-subfilemimetype=MIME '-subfiledata<=FILE'
where "TYPE" and "MIME" represent the source file type and
MIME type respectively.
Adding a MIE Trailer to a File¶
The MIE format may also be used to store information in a trailer appended to
another type of file. Beware that trailers may not be compatible with all file
formats, but JPEG and TIFF are two formats where additional trailer
information doesn't create any problems for normal parsing of the file. Also
note that this technique has the disadvantage that trailer information is
commonly lost if the file is subsequently edited by other software.
Creating a MIE trailer with ExifTool is a two-step process since ExifTool can't
currently be used to add a MIE trailer directly. The example below illustrates
the steps for adding a MIE trailer with a small preview image
("small.jpg") to a destination JPEG image ("dst.jpg").
Step 1) Create a MIE file with a TrailerSignature containing the desired
information:
exiftool -o new.mie -trailersignature=1 -tagsfromfile small.jpg \
'-previewimagetype<filetype' '-previewimagesize<imagesize' \
'-previewimagename<filename' '-previewimage<=small.jpg'
Step 2) Append the MIE information to another file. In Unix, this can be done
with the 'cat' command:
cat new.mie >> dst.jpg
Once added, ExifTool may be used to edit or delete a MIE trailer in a JPEG or
TIFF image.
Multiple MIE Documents in a Single File¶
The MIE specification allows multiple MIE documents (or trailers) to exist in a
single file. A file like this may be created by simply concatenating MIE
documents. ExifTool may be used to access information in a specific document
by adding a copy number to the MIE group name. For example:
# write the Author tag in the second MIE document
exiftool -mie2:author=phil test.mie
# delete the first MIE document from a file
exiftool -mie1:all= test.mie
Units of Measurement¶
Some MIE tags allow values to be specified in different units of measurement. In
the MIE file format these units are combined with the tag name, but when using
ExifTool they are specified in brackets after the value:
exiftool -mie:gpsaltitude='7500(ft)' test.mie
If no units are provided, the default units are written.
Localized Text¶
Localized text values are accessed by adding a language/country code to the tag
name. For example:
exiftool -comment-en_us='this is a comment' test.mie
REVISIONS¶
2010-04-05 - Fixed "Format Size" Note 7 to give the correct number of bits
in the example rational value
2007-01-21 - Specified LF character (0x0a) for text newline sequence
2007-01-19 - Specified ISO 8859-1 character set for extended ASCII codes
2007-01-01 - Improved wording of Step 5 for scanning backwards in MIE file
2006-12-30 - Added EXAMPLES section and note about UTF BOM
2006-12-20 - MIE 1.1: Changed meaning of TypeModifier bit (0x08) for
unknown data (FormatType 0x00), and documented byte swapping
2006-12-14 - MIE 1.0: Added Data Values and Numerical Representations
sections, and added ability to specify units in tag names
2006-11-09 - Added Levels of Support section
2006-11-03 - Added Trailer Signature
2005-11-18 - Original specification created
AUTHOR¶
Copyright 2003-2014, Phil Harvey (phil at owl.phy.queensu.ca)
This library is free software; you can redistribute it and/or modify it under
the same terms as Perl itself. The MIE format itself is also copyright Phil
Harvey, and is covered by the same free-use license.
REFERENCES¶
- <http://owl.phy.queensu.ca/~phil/exiftool/MIE1.1-20070121.pdf>
SEE ALSO¶
"MIE Tags" in Image::ExifTool::TagNames, Image::ExifTool::MIEUnits,
Image::ExifTool(3pm)