NAME¶
Config::Model::models::LCDd::MtxOrb - Configuration class LCDd::MtxOrb
DESCRIPTION¶
Configuration classes used by Config::Model
generated from LCDd.conf
Elements¶
Brightness¶
Set the initial brightness
Optional. Type integer. upstream_default:
'1000'.
Contrast¶
Set the initial contrast NOTE: The driver will ignore this if the display
is a vfd or vkd as they don't have this feature.
Optional. Type uniline.
upstream_default: '480'.
Device¶
Select the output device to use
Optional. Type uniline. upstream_default:
'/dev/lcd'.
KeyMap_A¶
The following table translates from MtxOrb key letters to logical key names. By
default no keys are mapped, meaning the keypad is not used at all.
Optional. Type uniline. upstream_default: 'Left'.
KeyMap_B¶
Optional. Type uniline. upstream_default: 'Right'.
KeyMap_C¶
Optional. Type uniline. upstream_default: 'Up'.
KeyMap_D¶
Optional. Type uniline. upstream_default: 'Down'.
KeyMap_E¶
Optional. Type uniline. upstream_default: 'Enter'.
KeyMap_F¶
Optional. Type uniline. upstream_default: 'Escape'.
OffBrightness¶
Set the initial off-brightness This value is used when the display is normally
switched off in case LCDd is inactive.
Optional. Type integer.
upstream_default: '0'.
Size¶
Set the display size
Optional. Type uniline. upstream_default: '20x4'.
Speed¶
Set the communication speed
Optional. Type enum. choice: '1200', '2400',
'9600', '19200'. upstream_default: '19200'.
Type¶
Set the display type
Optional. Type enum. choice: 'lcd', 'lkd', 'vfd', 'vkd'.
upstream_default: 'lcd'.
hasAdjustableBacklight¶
Some old displays do not have an adjustable backlight but only can switch the
backlight on/off. If you experience randomly appearing block characters, try
setting this to false.
Optional. Type boolean. upstream_default: 'yes'.
keypad_test_mode¶
See the [menu] section for an explanation of the key mappings You can find out
which key of your display sends which character by setting keypad_test_mode to
yes and running LCDd. LCDd will output all characters it receives. Afterwards
you can modify the settings above and set keypad_set_mode to no again.
Optional. Type uniline. default: 'no'.
SEE ALSO¶
- •
- cme