NAME¶
Config::Model::models::LCDd::CFontzPacket - Configuration class
LCDd::CFontzPacket
DESCRIPTION¶
Configuration classes used by Config::Model
generated from LCDd.conf
Elements¶
Brightness¶
Set the initial brightness
Optional. Type integer. upstream_default:
'1000'.
Contrast¶
Set the initial contrast
Optional. Type integer. upstream_default: '560'.
Device¶
Select the output device to use
Optional. Type uniline. upstream_default:
'/dev/lcd'.
Model¶
Select the LCD model
Optional. Type enum. choice: '533', '631', '633', '635'.
upstream_default: '633'.
OffBrightness¶
Set the initial off-brightness This value is used when the display is normally
switched off in case LCDd is inactive.
Optional. Type integer.
upstream_default: '0'.
OldFirmware¶
Very old 633 firmware versions do not support partial screen updates using 'Send
Data to LCD' command (31). For those devices it may be necessary to enable
this flag.
Optional. Type boolean. upstream_default: 'no'.
Reboot¶
Reinitialize the LCD's BIOS on driver start.
Optional. Type boolean.
upstream_default: 'no'.
Size¶
Override the LCD size known for the selected model. Usually setting this value
should not be necessary.
Optional. Type uniline. upstream_default:
'20x4'.
Speed¶
Override the default communication speed known for the selected model. Default
value depends on model
Optional. Type enum. choice: '19200', '115200'.
USB¶
Enable the USB flag if the device is connected to an USB port. For serial ports
leave it disabled.
Optional. Type boolean. upstream_default: 'no'.
SEE ALSO¶
- •
- cme