other versions
- jessie 1:2.1.4-2.1+deb8u6
- jessie-backports 1:2.11.0-3~bpo8+1
- stretch 1:2.11.0-3+deb9u4
- testing 1:2.20.1-2
- stretch-backports 1:2.20.1-1~bpo9+1
- unstable 1:2.20.1-2
- experimental 1:2.21.0+next.20190320-1
GIT-REV-PARSE(1) | Git Manual | GIT-REV-PARSE(1) |
NAME¶
git-rev-parse - Pick out and massage parametersSYNOPSIS¶
git rev-parse [ --option ] <args>...
DESCRIPTION¶
Many Git porcelainish commands take mixture of flags (i.e. parameters that begin with a dash -) and parameters meant for the underlying git rev-list command they use internally and flags and parameters for the other commands they use downstream of git rev-list. This command is used to distinguish between them.OPTIONS¶
Operation Modes¶
Each of these options must appear first on the command line. --parseoptUse git rev-parse in option parsing mode (see
PARSEOPT section below).
--sq-quote
Use git rev-parse in shell quoting mode (see
SQ-QUOTE section below). In contrast to the --sq option below, this
mode does only quoting. Nothing else is done to command input.
Options for --parseopt¶
--keep-dashdashOnly meaningful in --parseopt mode. Tells the
option parser to echo out the first -- met instead of skipping
it.
--stop-at-non-option
Only meaningful in --parseopt mode. Lets the
option parser stop at the first non-option argument. This can be used to parse
sub-commands that take options themselves.
--stuck-long
Only meaningful in --parseopt mode. Output the
options in their long form if available, and with their arguments stuck.
Options for Filtering¶
--revs-onlyDo not output flags and parameters not meant for git
rev-list command.
--no-revs
Do not output flags and parameters meant for git
rev-list command.
--flags
Do not output non-flag parameters.
--no-flags
Do not output flag parameters.
Options for Output¶
--default <arg>If there is no parameter given by the user, use
<arg> instead.
--prefix <arg>
Behave as if git rev-parse was invoked from the
<arg> subdirectory of the working tree. Any relative filenames
are resolved as if they are prefixed by <arg> and will be printed
in that form.
This can be used to convert arguments to a command run in a subdirectory so that
they can still be used after moving to the top-level of the repository. For
example:
--verify
prefix=$(git rev-parse --show-prefix) cd "$(git rev-parse --show-toplevel)" eval "set -- $(git rev-parse --sq --prefix "$prefix" "$@")"
Verify that exactly one parameter is provided, and that
it can be turned into a raw 20-byte SHA-1 that can be used to access the
object database. If so, emit it to the standard output; otherwise, error out.
If you want to make sure that the output actually names an object in your object
database and/or can be used as a specific type of object you require, you can
add the ^{type} peeling operator to the parameter. For example, git
rev-parse "$VAR^{commit}" will make sure $VAR names an
existing object that is a commit-ish (i.e. a commit, or an annotated tag that
points at a commit). To make sure that $VAR names an existing object of
any type, git rev-parse "$VAR^{object}" can be used.
-q, --quiet
Only meaningful in --verify mode. Do not output an
error message if the first argument is not a valid object name; instead exit
with non-zero status silently. SHA-1s for valid object names are printed to
stdout on success.
--sq
Usually the output is made one line per flag and
parameter. This option makes output a single line, properly quoted for
consumption by shell. Useful when you expect your parameter to contain
whitespaces and newlines (e.g. when using pickaxe -S with git
diff-*). In contrast to the --sq-quote option, the command input is
still interpreted as usual.
--not
When showing object names, prefix them with ^ and
strip ^ prefix from the object names that already have one.
--abbrev-ref[=(strict|loose)]
A non-ambiguous short name of the objects name. The
option core.warnAmbiguousRefs is used to select the strict abbreviation
mode.
--short, --short=number
Instead of outputting the full SHA-1 values of object
names try to abbreviate them to a shorter unique name. When no length is
specified 7 is used. The minimum length is 4.
--symbolic
Usually the object names are output in SHA-1 form (with
possible ^ prefix); this option makes them output in a form as close to
the original input as possible.
--symbolic-full-name
This is similar to --symbolic, but it omits input that
are not refs (i.e. branch or tag names; or more explicitly disambiguating
"heads/master" form, when you want to name the "master"
branch when there is an unfortunately named tag "master"), and show
them as full refnames (e.g. "refs/heads/master").
Options for Objects¶
--allShow all refs found in refs/.
--branches[=pattern], --tags[=pattern], --remotes[=pattern]
Show all branches, tags, or remote-tracking branches,
respectively (i.e., refs found in refs/heads, refs/tags, or
refs/remotes, respectively).
If a pattern is given, only refs matching the given shell glob are shown.
If the pattern does not contain a globbing character ( ?, *, or
[), it is turned into a prefix match by appending /*.
--glob=pattern
Show all refs matching the shell glob pattern
pattern. If the pattern does not start with refs/, this is
automatically prepended. If the pattern does not contain a globbing character
( ?, *, or [), it is turned into a prefix match by
appending /*.
--exclude=<glob-pattern>
Do not include refs matching <glob-pattern>
that the next --all, --branches, --tags,
--remotes, or --glob would otherwise consider. Repetitions of
this option accumulate exclusion patterns up to the next --all,
--branches, --tags, --remotes, or --glob option
(other options or arguments do not clear accumulated patterns).
The patterns given should not begin with refs/heads, refs/tags, or
refs/remotes when applied to --branches, --tags, or
--remotes, respectively, and they must begin with refs/ when
applied to --glob or --all. If a trailing /* is intended,
it must be given explicitly.
--disambiguate=<prefix>
Show every object whose name begins with the given
prefix. The <prefix> must be at least 4 hexadecimal digits long to avoid
listing each and every object in the repository by mistake.
Options for Files¶
--local-env-varsList the GIT_* environment variables that are local to
the repository (e.g. GIT_DIR or GIT_WORK_TREE, but not GIT_EDITOR). Only the
names of the variables are listed, not their value, even if they are
set.
--git-dir
Show $GIT_DIR if defined. Otherwise show the path
to the .git directory. The path shown, when relative, is relative to the
current working directory.
If $GIT_DIR is not defined and the current directory is not detected to
lie in a Git repository or work tree print a message to stderr and exit with
nonzero status.
--git-common-dir
Show $GIT_COMMON_DIR if defined, else
$GIT_DIR.
--is-inside-git-dir
When the current working directory is below the
repository directory print "true", otherwise
"false".
--is-inside-work-tree
When the current working directory is inside the work
tree of the repository print "true", otherwise
"false".
--is-bare-repository
When the repository is bare print "true",
otherwise "false".
--resolve-git-dir <path>
Check if <path> is a valid repository or a gitfile
that points at a valid repository, and print the location of the repository.
If <path> is a gitfile then the resolved path to the real repository is
printed.
--git-path <path>
Resolve "$GIT_DIR/<path>" and takes other
path relocation variables such as $GIT_OBJECT_DIRECTORY, $GIT_INDEX_FILE...
into account. For example, if $GIT_OBJECT_DIRECTORY is set to /foo/bar then
"git rev-parse --git-path objects/abc" returns /foo/bar/abc.
--show-cdup
When the command is invoked from a subdirectory, show the
path of the top-level directory relative to the current directory (typically a
sequence of "../", or an empty string).
--show-prefix
When the command is invoked from a subdirectory, show the
path of the current directory relative to the top-level directory.
--show-toplevel
Show the absolute path of the top-level directory.
--shared-index-path
Show the path to the shared index file in split index
mode, or empty if not in split-index mode.
Other Options¶
--since=datestring, --after=datestringParse the date string, and output the corresponding
--max-age= parameter for git rev-list.
--until=datestring, --before=datestring
Parse the date string, and output the corresponding
--min-age= parameter for git rev-list.
<args>...
Flags and parameters to be parsed.
SPECIFYING REVISIONS¶
A revision parameter <rev> typically, but not necessarily, names a commit object. It uses what is called an extended SHA-1 syntax. Here are various ways to spell object names. The ones listed near the end of this list name trees and blobs contained in a commit. <sha1>, e.g. dae86e1950b1277e545cee180551750029cfe735, dae86eThe full SHA-1 object name (40-byte hexadecimal string),
or a leading substring that is unique within the repository. E.g.
dae86e1950b1277e545cee180551750029cfe735 and dae86e both name the same commit
object if there is no other object in your repository whose object name starts
with dae86e.
<describeOutput>, e.g. v1.7.4.2-679-g3bee7fb
Output from git describe; i.e. a closest tag,
optionally followed by a dash and a number of commits, followed by a dash, a
g, and an abbreviated object name.
<refname>, e.g. master, heads/master,
refs/heads/master
A symbolic ref name. E.g. master typically means
the commit object referenced by refs/heads/master. If you happen to
have both heads/master and tags/master, you can explicitly say
heads/master to tell Git which one you mean. When ambiguous, a
<refname> is disambiguated by taking the first match in the
following rules:
@
1.If $GIT_DIR/<refname> exists, that is
what you mean (this is usually useful only for HEAD, FETCH_HEAD,
ORIG_HEAD, MERGE_HEAD and CHERRY_PICK_HEAD);
2.otherwise, refs/<refname> if it
exists;
3.otherwise, refs/tags/<refname> if it
exists;
4.otherwise, refs/heads/<refname> if it
exists;
5.otherwise, refs/remotes/<refname> if it
exists;
6.otherwise, refs/remotes/<refname>/HEAD if
it exists.
HEAD names the commit on which you based the changes in the working tree.
FETCH_HEAD records the branch which you fetched from a remote
repository with your last git fetch invocation. ORIG_HEAD is
created by commands that move your HEAD in a drastic way, to record the
position of the HEAD before their operation, so that you can easily
change the tip of the branch back to the state before you ran them.
MERGE_HEAD records the commit(s) which you are merging into your branch
when you run git merge. CHERRY_PICK_HEAD records the commit
which you are cherry-picking when you run git cherry-pick.
Note that any of the refs/* cases above may come either from the
$GIT_DIR/refs directory or from the $GIT_DIR/packed-refs file.
While the ref name encoding is unspecified, UTF-8 is preferred as some output
processing may assume ref names in UTF-8.
@ alone is a shortcut for HEAD.
<refname>@{<date>}, e.g. master@{yesterday},
HEAD@{5 minutes ago}
A ref followed by the suffix @ with a date
specification enclosed in a brace pair (e.g. {yesterday}, {1 month 2
weeks 3 days 1 hour 1 second ago} or {1979-02-26 18:30:00})
specifies the value of the ref at a prior point in time. This suffix may only
be used immediately following a ref name and the ref must have an existing log
( $GIT_DIR/logs/<ref>). Note that this looks up the state of your
local ref at a given time; e.g., what was in your local master
branch last week. If you want to look at commits made during certain times,
see --since and --until.
<refname>@{<n>}, e.g. master@{1}
A ref followed by the suffix @ with an ordinal
specification enclosed in a brace pair (e.g. {1}, {15})
specifies the n-th prior value of that ref. For example master@{1} is
the immediate prior value of master while master@{5} is the 5th
prior value of master. This suffix may only be used immediately
following a ref name and the ref must have an existing log (
$GIT_DIR/logs/<refname>).
@{<n>}, e.g. @{1}
You can use the @ construct with an empty ref part
to get at a reflog entry of the current branch. For example, if you are on
branch blabla then @{1} means the same as
blabla@{1}.
@{-<n>}, e.g. @{-1}
The construct @{-<n>} means the <n>th
branch/commit checked out before the current one.
<branchname>@{upstream}, e.g. master@{upstream}, @{u}
The suffix @{upstream} to a branchname (short form
<branchname>@{u}) refers to the branch that the branch specified
by branchname is set to build on top of (configured with
branch.<name>.remote and branch.<name>.merge). A
missing branchname defaults to the current one.
<branchname>@{push}, e.g. master@{push}, @{push}
The suffix @{push} reports the branch "where
we would push to" if git push were run while branchname was
checked out (or the current HEAD if no branchname is specified). Since
our push destination is in a remote repository, of course, we report the local
tracking branch that corresponds to that branch (i.e., something in
refs/remotes/).
Here’s an example to make it more clear:
Note in the example that we set up a triangular workflow, where we pull from one
location and push to another. In a non-triangular workflow, @{push} is
the same as @{upstream}, and there is no need for it.
<rev>^, e.g. HEAD^, v1.5.1^0
$ git config push.default current $ git config remote.pushdefault myfork $ git checkout -b mybranch origin/master $ git rev-parse --symbolic-full-name @{upstream} refs/remotes/origin/master $ git rev-parse --symbolic-full-name @{push} refs/remotes/myfork/mybranch
A suffix ^ to a revision parameter means the first
parent of that commit object. ^<n> means the <n>th parent
(i.e. <rev>^ is equivalent to <rev>^1). As a special
rule, <rev>^0 means the commit itself and is used when
<rev> is the object name of a tag object that refers to a commit
object.
<rev>~<n>, e.g. master~3
A suffix ~<n> to a revision parameter means
the commit object that is the <n>th generation ancestor of the named
commit object, following only the first parents. I.e. <rev>~3 is
equivalent to <rev>^^^ which is equivalent to
<rev>^1^1^1. See below for an illustration of the usage of this
form.
<rev>^{<type>}, e.g. v0.99.8^{commit}
A suffix ^ followed by an object type name
enclosed in brace pair means dereference the object at <rev>
recursively until an object of type <type> is found or the object
cannot be dereferenced anymore (in which case, barf). For example, if
<rev> is a commit-ish, <rev>^{commit} describes the
corresponding commit object. Similarly, if <rev> is a tree-ish,
<rev>^{tree} describes the corresponding tree object.
<rev>^0 is a short-hand for <rev>^{commit}.
rev^{object} can be used to make sure rev names an object that
exists, without requiring rev to be a tag, and without dereferencing
rev; because a tag is already an object, it does not have to be
dereferenced even once to get to an object.
rev^{tag} can be used to ensure that rev identifies an existing
tag object.
<rev>^{}, e.g. v0.99.8^{}
A suffix ^ followed by an empty brace pair means
the object could be a tag, and dereference the tag recursively until a non-tag
object is found.
<rev>^{/<text>}, e.g. HEAD^{/fix nasty bug}
A suffix ^ to a revision parameter, followed by a
brace pair that contains a text led by a slash, is the same as the :/fix
nasty bug syntax below except that it returns the youngest matching commit
which is reachable from the <rev> before ^.
:/<text>, e.g. :/fix nasty bug
A colon, followed by a slash, followed by a text, names a
commit whose commit message matches the specified regular expression. This
name returns the youngest matching commit which is reachable from any ref. The
regular expression can match any part of the commit message. To match messages
starting with a string, one can use e.g. :/^foo. The special sequence
:/! is reserved for modifiers to what is matched. :/!-foo
performs a negative match, while :/!!foo matches a literal !
character, followed by foo. Any other sequence beginning with
:/! is reserved for now.
<rev>:<path>, e.g. HEAD:README, :README,
master:./README
A suffix : followed by a path names the blob or
tree at the given path in the tree-ish object named by the part before the
colon. :path (with an empty part before the colon) is a special case of
the syntax described next: content recorded in the index at the given path. A
path starting with ./ or ../ is relative to the current working
directory. The given path will be converted to be relative to the working
tree’s root directory. This is most useful to address a blob or tree
from a commit or tree that has the same tree structure as the working
tree.
:<n>:<path>, e.g. :0:README, :README
A colon, optionally followed by a stage number (0 to 3)
and a colon, followed by a path, names a blob object in the index at the given
path. A missing stage number (and the colon that follows it) names a stage 0
entry. During a merge, stage 1 is the common ancestor, stage 2 is the target
branch’s version (typically the current branch), and stage 3 is the
version from the branch which is being merged.
Here is an illustration, by Jon Loeliger. Both commit nodes B and C are parents
of commit node A. Parent commits are ordered left-to-right.
G H I J \ / \ / D E F \ | / \ \ | / | \|/ | B C \ / \ / A
A = = A^0 B = A^ = A^1 = A~1 C = A^2 = A^2 D = A^^ = A^1^1 = A~2 E = B^2 = A^^2 F = B^3 = A^^3 G = A^^^ = A^1^1^1 = A~3 H = D^2 = B^^2 = A^^^2 = A~2^2 I = F^ = B^3^ = A^^3^ J = F^2 = B^3^2 = A^^3^2
SPECIFYING RANGES¶
History traversing commands such as git log operate on a set of commits, not just a single commit. For these commands, specifying a single revision, using the notation described in the previous section, means the set of commits reachable from the given commit. A commit’s reachable set is the commit itself and the commits in its ancestry chain.Commit Exclusions¶
^<rev> (caret) NotationTo exclude commits reachable from a commit, a prefix
^ notation is used. E.g. ^r1 r2 means commits reachable from
r2 but exclude the ones reachable from r1 (i.e. r1 and
its ancestors).
Dotted Range Notations¶
The .. (two-dot) Range NotationThe ^r1 r2 set operation appears so often that
there is a shorthand for it. When you have two commits r1 and r2
(named according to the syntax explained in SPECIFYING REVISIONS above), you
can ask for commits that are reachable from r2 excluding those that are
reachable from r1 by ^r1 r2 and it can be written as
r1..r2.
The ... (three dot) Symmetric Difference Notation
A similar notation r1...r2 is called symmetric
difference of r1 and r2 and is defined as r1 r2 --not $(git
merge-base --all r1 r2). It is the set of commits that are reachable from
either one of r1 (left side) or r2 (right side) but not from
both.
In these two shorthand notations, you can omit one end and let it default to
HEAD. For example, origin.. is a shorthand for origin..HEAD and
asks "What did I do since I forked from the origin branch?"
Similarly, ..origin is a shorthand for HEAD..origin and asks
"What did the origin do since I forked from them?" Note that
.. would mean HEAD..HEAD which is an empty range that is both
reachable and unreachable from HEAD.
Other <rev>^ Parent Shorthand Notations¶
Three other shorthands exist, particularly useful for merge commits, for naming a set that is formed by a commit and its parent commits. The r1^@ notation means all parents of r1. The r1^! notation includes commit r1 but excludes all of its parents. By itself, this notation denotes the single commit r1. The <rev>^-{<n>} notation includes <rev> but excludes the <n>th parent (i.e. a shorthand for <rev>^<n>..<rev>), with <n> = 1 if not given. This is typically useful for merge commits where you can just pass <commit>^- to get all the commits in the branch that was merged in merge commit <commit> (including <commit> itself). While <rev>^<n> was about specifying a single commit parent, these three notations also consider its parents. For example you can say HEAD^2^@, however you cannot say HEAD^@^2.REVISION RANGE SUMMARY¶
<rev>Include commits that are reachable from <rev> (i.e.
<rev> and its ancestors).
^<rev>
Exclude commits that are reachable from <rev> (i.e.
<rev> and its ancestors).
<rev1>..<rev2>
Include commits that are reachable from <rev2> but
exclude those that are reachable from <rev1>. When either <rev1>
or <rev2> is omitted, it defaults to HEAD.
<rev1>...<rev2>
Include commits that are reachable from either
<rev1> or <rev2> but exclude those that are reachable from both.
When either <rev1> or <rev2> is omitted, it defaults to
HEAD.
<rev>^@, e.g. HEAD^@
A suffix ^ followed by an at sign is the same as
listing all parents of <rev> (meaning, include anything reachable
from its parents, but not the commit itself).
<rev>^!, e.g. HEAD^!
A suffix ^ followed by an exclamation mark is the
same as giving commit <rev> and then all its parents prefixed
with ^ to exclude them (and their ancestors).
<rev>^-{<n>}, e.g. HEAD^-, HEAD^-2
Equivalent to <rev>^<n>..<rev>,
with <n> = 1 if not given.
Here are a handful of examples using the Loeliger illustration above, with each
step in the notation’s expansion and selection carefully spelt out:
Args Expanded arguments Selected commits D G H D D F G H I J D F ^G D H D ^D B E I J F B ^D B C E I J F B C C I J F C B..C = ^B C C B...C = B ^F C G H D E B C B^- = B^..B = ^B^1 B E I J F B C^@ = C^1 = F I J F B^@ = B^1 B^2 B^3 = D E F D G H E F I J C^! = C ^C^@ = C ^C^1 = C ^F C B^! = B ^B^@ = B ^B^1 ^B^2 ^B^3 = B ^D ^E ^F B F^! D = F ^I ^J D G H D F
PARSEOPT¶
In --parseopt mode, git rev-parse helps massaging options to bring to shell scripts the same facilities C builtins have. It works as an option normalizer (e.g. splits single switches aggregate values), a bit like getopt(1) does. It takes on the standard input the specification of the options to parse and understand, and echoes on the standard output a string suitable for sh(1) eval to replace the arguments with normalized ones. In case of error, it outputs usage on the standard error stream, and exits with code 129. Note: Make sure you quote the result when passing it to eval. See below for an example.Input Format¶
git rev-parse --parseopt input format is fully text based. It has two parts, separated by a line that contains only --. The lines before the separator (should be one or more) are used for the usage. The lines after the separator describe the options. Each line of options has this format:<opt-spec><flags>*<arg-hint>? SP+ help LF
its format is the short option character, then the long
option name separated by a comma. Both parts are not required, though at least
one is necessary. May not contain any of the <flags> characters.
h,help, dry-run and f are examples of correct
<opt-spec>.
<flags>
<flags> are of *, =, ?
or !.
<arg-hint>
•Use = if the option takes an
argument.
•Use ? to mean that the option takes an
optional argument. You probably want to use the --stuck-long mode to be
able to unambiguously parse the optional argument.
•Use * to mean that this option should not
be listed in the usage generated for the -h argument. It’s shown
for --help-all as documented in gitcli(7).
•Use ! to not make the corresponding
negated long option available.
<arg-hint>, if specified, is used as a name
of the argument in the help output, for options that take arguments.
<arg-hint> is terminated by the first whitespace. It is customary
to use a dash to separate words in a multi-word argument hint.
The remainder of the line, after stripping the spaces, is used as the help
associated to the option.
Blank lines are ignored, and lines that don’t match this specification
are used as option group headers (start the line with a space to create such
lines on purpose).
Example¶
OPTS_SPEC="\ some-command [options] <args>... some-command does foo and bar! -- h,help show the help foo some nifty option --foo bar= some cool option --bar with an argument baz=arg another cool option --baz with a named argument qux?path qux may take a path argument but has meaning by itself An option group Header C? option C with an optional argument" eval "$(echo "$OPTS_SPEC" | git rev-parse --parseopt -- "$@" || echo exit $?)"
Usage text¶
When "$@" is -h or --help in the above example, the following usage text would be shown:usage: some-command [options] <args>... some-command does foo and bar! -h, --help show the help --foo some nifty option --foo --bar ... some cool option --bar with an argument --baz <arg> another cool option --baz with a named argument --qux[=<path>] qux may take a path argument but has meaning by itself An option group Header -C[...] option C with an optional argument
SQ-QUOTE¶
In --sq-quote mode, git rev-parse echoes on the standard output a single line suitable for sh(1) eval. This line is made by normalizing the arguments following --sq-quote. Nothing other than quoting the arguments is done. If you want command input to still be interpreted as usual by git rev-parse before the output is shell quoted, see the --sq option.Example¶
$ cat >your-git-script.sh <<\EOF #!/bin/sh args=$(git rev-parse --sq-quote "$@") # quote user-supplied arguments command="git frotz -n24 $args" # and use it inside a handcrafted # command line eval "$command" EOF $ sh your-git-script.sh "a b'c"
EXAMPLES¶
•Print the object name of the current commit:
$ git rev-parse --verify HEAD
•Print the commit object name from the revision in
the $REV shell variable:
This will error out if $REV is empty or not a valid revision.
$ git rev-parse --verify $REV^{commit}
•Similar to above:
but if $REV is empty, the commit object name from master will be printed.
$ git rev-parse --default master --verify $REV
GIT¶
Part of the git(1) suite05/15/2017 | Git 2.11.0 |