NAME¶
fence_hpblade - Fence agent for HP BladeSystem
DESCRIPTION¶
fence_hpblade is an I/O Fencing agent which can be used with HP BladeSystem and
HP Integrity Superdome X. It logs into the onboard administrator of an
enclosure via telnet or ssh and uses the command line interface to power
blades or partitions on or off.
fence_hpblade accepts options on the command line as well as from stdin. Fenced
sends parameters through stdin when it execs the agent. fence_hpblade can be
run by itself with command line options. This is useful for testing and for
turning outlets on or off from scripts.
Vendor URL:
http://www.hp.com
PARAMETERS¶
- -o, --action=[action]
- Fencing action (Default Value: reboot)
- -c, --command-prompt=[prompt]
- Force Python regex for command prompt (Default Value: ['c7000oa>'])
- -k, --identity-file=[filename]
- Identity file (private key) for SSH
- -4, --inet4-only
- Forces agent to use IPv4 addresses only
- -6, --inet6-only
- Forces agent to use IPv6 addresses only
- -a, --ip=[ip]
- IP address or hostname of fencing device This parameter is always
required.
- -u, --ipport=[port]
- TCP/UDP port to use for connection with device (Default Value: 23)
- -l, --username=[name]
- Login name This parameter is always required.
- -p, --password=[password]
- Login password or passphrase
- -S, --password-script=[script]
- Script to run to retrieve password
- -n, --plug=[id]
- Physical plug number on device, UUID or identification of machine This
parameter is always required.
- -x, --ssh
- Use SSH connection
- --ssh-options=[options]
- SSH options to use
- -q, --quiet
- Disable logging to stderr. Does not affect --verbose or --debug logging to
syslog.
- -v, --verbose
- Verbose mode
- -D, --debug-file=[debugfile]
- Write debug information to given file
- -V, --version
- Display version information and exit
- -h, --help
- Display help and exit
- -C, --separator=[char]
- Separator for CSV created by 'list' operation (Default Value: ,)
- --delay=[seconds]
- Wait X seconds before fencing is started (Default Value: 0)
- --login-timeout=[seconds]
- Wait X seconds for cmd prompt after login (Default Value: 10)
- --missing-as-off
- Missing port returns OFF instead of failure
- --power-timeout=[seconds]
- Test X seconds for status change after ON/OFF (Default Value: 20)
- --power-wait=[seconds]
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- --shell-timeout=[seconds]
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- --retry-on=[attempts]
- Count of attempts to retry power on (Default Value: 1)
- --ssh-path=[path]
- Path to ssh binary (Default Value: /usr/bin/ssh)
- --telnet-path=[path]
- Path to telnet binary (Default Value: /usr/bin/telnet)
ACTIONS¶
- on
- Power on machine.
- off
- Power off machine.
- reboot
- Reboot machine.
- status
- This returns the status of the plug/virtual machine.
- list
- List available plugs with aliases/virtual machines if there is support for
more then one device. Returns N/A otherwise.
- list-status
- List available plugs with aliases/virtual machines and their power state
if it can be obtained without additional commands.
- monitor
- Check the health of fence device
- metadata
- Display the XML metadata describing this resource.
- validate-all
- Validate if all required parameters are entered.
STDIN PARAMETERS¶
- action
- Fencing action (Default Value: reboot)
- cmd_prompt
- Force Python regex for command prompt (Default Value: ['c7000oa>'])
- identity_file
- Identity file (private key) for SSH
- inet4_only
- Forces agent to use IPv4 addresses only
- inet6_only
- Forces agent to use IPv6 addresses only
- ipaddr
- IP address or hostname of fencing device This parameter is always
required.
- ipport
- TCP/UDP port to use for connection with device (Default Value: 23)
- login
- Login name This parameter is always required.
- passwd
- Login password or passphrase
- passwd_script
- Script to run to retrieve password
- port
- Physical plug number on device, UUID or identification of machine This
parameter is always required.
- secure
- Use SSH connection
- ssh_options
- SSH options to use
- quiet
- Disable logging to stderr. Does not affect --verbose or --debug logging to
syslog.
- verbose
- Verbose mode
- debug
- Write debug information to given file
- version
- Display version information and exit
- help
- Display help and exit
- separator
- Separator for CSV created by 'list' operation (Default Value: ,)
- delay
- Wait X seconds before fencing is started (Default Value: 0)
- login_timeout
- Wait X seconds for cmd prompt after login (Default Value: 10)
- missing_as_off
- Missing port returns OFF instead of failure
- power_timeout
- Test X seconds for status change after ON/OFF (Default Value: 20)
- power_wait
- Wait X seconds after issuing ON/OFF (Default Value: 0)
- shell_timeout
- Wait X seconds for cmd prompt after issuing command (Default Value: 3)
- retry_on
- Count of attempts to retry power on (Default Value: 1)
- ssh_path
- Path to ssh binary (Default Value: /usr/bin/ssh)
- telnet_path
- Path to telnet binary (Default Value: /usr/bin/telnet)