table of contents
other versions
- jessie 1:17.3-dfsg-4+deb8u2
- jessie-backports 1:19.2.1+dfsg-2+deb9u1~bpo8+1
- stretch 1:19.2.1+dfsg-2+deb9u2
- testing 1:21.2.5+dfsg-1
- unstable 1:21.2.6+dfsg-1
- experimental 1:22.0~rc1+dfsg-1
net_kernel(3erl) | Erlang Module Definition | net_kernel(3erl) |
NAME¶
net_kernel - Erlang networking kernel.DESCRIPTION¶
The net kernel is a system process, registered as net_kernel, which must be operational for distributed Erlang to work. The purpose of this process is to implement parts of the BIFs spawn/4 and spawn_link/4, and to provide monitoring of the network. An Erlang node is started using command-line flag -name or -sname:$ erl -sname foobarIt is also possible to call net_kernel:start([foobar]) directly from the normal Erlang shell prompt:
1> net_kernel:start([foobar, shortnames]). {ok,<0.64.0>} (foobar@gringotts)2>If the node is started with command-line flag -sname, the node name is foobar@Host, where Host is the short name of the host (not the fully qualified domain name). If started with flag -name, the node name is foobar@Host, where Host is the fully qualified domain name. For more information, see erl. Normally, connections are established automatically when another node is referenced. This functionality can be disabled by setting Kernel configuration parameter dist_auto_connect to false, see kernel(7). In this case, connections must be established explicitly by calling connect_node/1. Which nodes that are allowed to communicate with each other is handled by the magic cookie system, see section Distributed Erlang in the Erlang Reference Manual.
EXPORTS¶
allow(Nodes) -> ok | error
Types:
Nodes = [node()]
Permits access to the specified set of nodes.
Before the first call to allow/1, any node with the correct cookie can be
connected. When allow/1 is called, a list of allowed nodes is
established. Any access attempts made from (or to) nodes not in that list will
be rejected.
Subsequent calls to allow/1 will add the specified nodes to the list of
allowed nodes. It is not possible to remove nodes from the list.
Returns error if any element in Nodes is not an atom.
connect_node(Node) -> boolean() | ignored
Types:
Node = node()
Establishes a connection to Node. Returns true if successful,
false if not, and ignored if the local node is not alive.
get_net_ticktime() -> Res
Types:
Res = NetTicktime | {ongoing_change_to, NetTicktime} |
ignored
NetTicktime = integer() >= 1
Gets net_ticktime (see kernel(7)).
Defined return values ( Res):
- NetTicktime:
- net_ticktime is NetTicktime seconds.
- {ongoing_change_to, NetTicktime}:
- net_kernel is currently changing net_ticktime to NetTicktime seconds.
- ignored:
- The local node is not alive.
getopts(Node, Options) -> {ok, OptionValues} | {error, Reason} | ignored
Types:
Node = node()
Options = [ inet:socket_getopt()]
OptionValues = [ inet:socket_setopt()]
Reason = inet:posix() | noconnection
Get one or more options for the distribution socket connected to Node.
If Node is a connected node the return value is the same as from
inet:getopts(Sock, Options) where Sock is the
distribution socket for Node.
Returns ignored if the local node is not alive or {error,
noconnection} if Node is not connected.
monitor_nodes(Flag) -> ok | Error
monitor_nodes(Flag, Options) -> ok | Error
Types:
Flag = boolean()
Options = [Option]
Option = {node_type, NodeType} | nodedown_reason
NodeType = visible | hidden | all
Error = error | {error, term()}
The calling process subscribes or unsubscribes to node status change messages. A
nodeup message is delivered to all subscribing processes when a new
node is connected, and a nodedown message is delivered when a node is
disconnected.
If Flag is true, a new subscription is started. If Flag is
false, all previous subscriptions started with the same Options
are stopped. Two option lists are considered the same if they contain the same
set of options.
As from Kernel version 2.11.4, and ERTS version 5.5.4, the following is
guaranteed:
Notice that this is not guaranteed for Kernel versions before 2.11.4.
As from Kernel version 2.11.4, subscriptions can also be made before the
net_kernel server is started, that is,
net_kernel:monitor_nodes/[1,2] does not return ignored.
As from Kernel version 2.13, and ERTS version 5.7, the following is guaranteed:
Notice that this is not guaranteed for Kernel versions before 2.13.
The format of the node status change messages depends on Options. If
Options is [], which is the default, the format is as follows:
- *
- nodeup messages are delivered before delivery of any message from the remote node passed through the newly established connection.
- *
- nodedown messages are not delivered until all messages from the remote node that have been passed through the connection have been delivered.
- *
- nodeup messages are delivered after the corresponding node appears in results from erlang:nodes/X.
- *
- nodedown messages are delivered after the corresponding node has disappeared in results from erlang:nodes/X.
{nodeup, Node} | {nodedown, Node} Node = node()If Options is not [], the format is as follows:
{nodeup, Node, InfoList} | {nodedown, Node, InfoList} Node = node() InfoList = [{Tag, Val}]InfoList is a list of tuples. Its contents depends on Options, see below. Also, when OptionList == [], only visible nodes, that is, nodes that appear in the result of erlang:nodes/0, are monitored. Option can be any of the following:
- {node_type, NodeType}:
- Valid values for NodeType:
- visible:
- Subscribe to node status change messages for visible nodes only. The tuple {node_type, visible} is included in InfoList.
- hidden:
- Subscribe to node status change messages for hidden nodes only. The tuple {node_type, hidden} is included in InfoList.
- all:
- Subscribe to node status change messages for both visible and hidden nodes. The tuple {node_type, visible | hidden} is included in InfoList.
- nodedown_reason:
- The tuple {nodedown_reason, Reason} is included in InfoList in nodedown messages.
Reason can be any of the following:
- connection_setup_failed:
- The connection setup failed (after nodeup messages were sent).
- no_network:
- No network is available.
- net_kernel_terminated:
- The net_kernel process terminated.
- shutdown:
- Unspecified connection shutdown.
- connection_closed:
- The connection was closed.
- disconnect:
- The connection was disconnected (forced from the current node).
- net_tick_timeout:
- Net tick time-out.
- send_net_tick_failed:
- Failed to send net tick over the connection.
- get_status_failed:
- Status information retrieval from the Port holding the connection failed.
set_net_ticktime(NetTicktime) -> Res
set_net_ticktime(NetTicktime, TransitionPeriod) -> Res
Types:
NetTicktime = integer() >= 1
TransitionPeriod = integer() >= 0
Res =
unchanged |
change_initiated |
{ongoing_change_to, NewNetTicktime}
NewNetTicktime = integer() >= 1
unchanged |
change_initiated |
{ongoing_change_to, NewNetTicktime}
Sets net_ticktime (see kernel(7)) to NetTicktime
seconds. TransitionPeriod defaults to 60.
Some definitions:
If NetTicktime < PreviousNetTicktime, the net_ticktime change
is done at the end of the transition period; otherwise at the beginning.
During the transition period, net_kernel ensures that there is outgoing
traffic on all connections at least every MTTI millisecond.
- Minimum transition traffic interval (MTTI):
- minimum(NetTicktime, PreviousNetTicktime)*1000 div 4 milliseconds.
- Transition period:
- The time of the least number of consecutive MTTIs to cover TransitionPeriod seconds following the call to set_net_ticktime/2 (that is, (( TransitionPeriod*1000 - 1) div MTTI + 1)*MTTI milliseconds).
Note:
The net_ticktime changes must be initiated on all nodes in the network
(with the same NetTicktime) before the end of any transition period on
any node; otherwise connections can erroneously be disconnected.
Returns one of the following:
- unchanged:
- net_ticktime already has the value of NetTicktime and is left unchanged.
- change_initiated:
- net_kernel initiated the change of net_ticktime to NetTicktime seconds.
- {ongoing_change_to, NewNetTicktime}:
- The request is ignored because net_kernel is busy changing net_ticktime to NewNetTicktime seconds.
setopts(Node, Options) -> ok | {error, Reason} | ignored
Types:
Node = node() | new
Options = [ inet:socket_setopt()]
Reason = inet:posix() | noconnection
Set one or more options for distribution sockets. Argument Node can be
either one node name or the atom new to affect the distribution sockets
of all future connected nodes.
The return value is the same as from inet:setopts/2 or {error,
noconnection} if Node is not a connected node or new.
If Node is new the Options will then also be added to
kernel configration parameters inet_dist_listen_options and
inet_dist_connect_options.
Returns ignored if the local node is not alive.
start([Name]) -> {ok, pid()} | {error, Reason}
Types:
Name = atom()
NameType = shortnames | longnames
Reason = {already_started, pid()} | term()
Turns a non-distributed node into a distributed node by starting
net_kernel and other necessary processes.
Notice that the argument is a list with exactly one, two, or three arguments.
NameType defaults to longnames and Ticktime to
15000.
stop() -> ok | {error, Reason}
Types:
Reason = not_allowed | not_found
Turns a distributed node into a non-distributed node. For other nodes in the
network, this is the same as the node going down. Only possible when the net
kernel was started using start/1, otherwise {error,
not_allowed} is returned. Returns {error, not_found} if the local
node is not alive.
kernel 5.1.1 | Ericsson AB |