Scroll to navigation

Tcl_LinkVar(3tcl) Tcl Library Procedures Tcl_LinkVar(3tcl)


NAME

Tcl_LinkArray, Tcl_LinkVar, Tcl_UnlinkVar, Tcl_UpdateLinkedVar - link Tcl variable to C variable

SYNOPSIS

#include <tcl.h>

int
Tcl_LinkVar(interp, varName, addr, type)

int
Tcl_LinkArray(interp, varName, addr, type, size)

Tcl_UnlinkVar(interp, varName)

Tcl_UpdateLinkedVar(interp, varName)

ARGUMENTS

Tcl_Interp *interp (in)
Interpreter that contains varName. Also used by Tcl_LinkVar to return error messages.
const char *varName (in)
Name of global variable.
void *addr (in)
Address of C variable that is to be linked to varName.

In Tcl_LinkArray, may be NULL to tell Tcl to create the storage for the array in the variable.

int type (in)
Type of C variable for Tcl_LinkVar or type of array element for Tcl_LinkArray. Must be one of TCL_LINK_INT, TCL_LINK_UINT, TCL_LINK_CHAR, TCL_LINK_UCHAR, TCL_LINK_SHORT, TCL_LINK_USHORT, TCL_LINK_LONG, TCL_LINK_ULONG, TCL_LINK_WIDE_INT, TCL_LINK_WIDE_UINT, TCL_LINK_FLOAT, TCL_LINK_DOUBLE, TCL_LINK_BOOLEAN, or one of the extra ones listed below.

In Tcl_LinkVar, the additional linked type TCL_LINK_STRING may be used.

In Tcl_LinkArray, the additional linked types TCL_LINK_CHARS and TCL_LINK_BYTES may be used.

All the above for both functions may be optionally OR'ed with TCL_LINK_READ_ONLY to make the Tcl variable read-only.

int size (in)
The number of elements in the C array. Must be greater than zero.
    

DESCRIPTION

Tcl_LinkVar uses variable traces to keep the Tcl variable named by varName in sync with the C variable at the address given by addr. Whenever the Tcl variable is read the value of the C variable will be returned, and whenever the Tcl variable is written the C variable will be updated to have the same value. Tcl_LinkVar normally returns TCL_OK; if an error occurs while setting up the link (e.g. because varName is the name of array) then TCL_ERROR is returned and the interpreter's result contains an error message.

Tcl_LinkArray is similar, but for arrays of fixed size (given by the size argument). When asked to allocate the backing C array storage (via the addr argument being NULL), it writes the address that it allocated to the Tcl interpreter result.

The type argument specifies the type of the C variable, or the type of the elements of the C array, and must have one of the following values, optionally OR'ed with TCL_LINK_READ_ONLY:

The C variable, or each element of the C array, is of type int. Any value written into the Tcl variable must have a proper integer form acceptable to Tcl_GetIntFromObj; attempts to write non-integer values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type unsigned int. Any value written into the Tcl variable must have a proper unsigned integer form acceptable to Tcl_GetWideIntFromObj and in the platform's defined range for the unsigned int type; attempts to write non-integer values (or values outside the range) into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type char. Any value written into the Tcl variable must have a proper integer form acceptable to Tcl_GetIntFromObj and be in the range of the char datatype; attempts to write non-integer or out-of-range values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.

If using an array of these, consider using TCL_LINK_CHARS instead.

The C array is of type char * and is mapped into Tcl as a string. Any value written into the Tcl variable must have the same length as the underlying storage. Only supported with Tcl_LinkArray.
The C variable, or each element of the C array, is of type unsigned char. Any value written into the Tcl variable must have a proper unsigned integer form acceptable to Tcl_GetIntFromObj and in the platform's defined range for the unsigned char type; attempts to write non-integer values (or values outside the range) into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.

If using an array of these, consider using TCL_LINK_BYTES instead.

The C array is of type unsigned char * and is mapped into Tcl as a bytearray. Any value written into the Tcl variable must have the same length as the underlying storage. Only supported with Tcl_LinkArray.
The C variable, or each element of the C array, is of type short. Any value written into the Tcl variable must have a proper integer form acceptable to Tcl_GetIntFromObj and be in the range of the short datatype; attempts to write non-integer or out-of-range values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type unsigned short. Any value written into the Tcl variable must have a proper unsigned integer form acceptable to Tcl_GetIntFromObj and in the platform's defined range for the unsigned short type; attempts to write non-integer values (or values outside the range) into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type long. Any value written into the Tcl variable must have a proper integer form acceptable to Tcl_GetLongFromObj; attempts to write non-integer or out-of-range values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type unsigned long. Any value written into the Tcl variable must have a proper unsigned integer form acceptable to Tcl_GetWideIntFromObj and in the platform's defined range for the unsigned long type; attempts to write non-integer values (or values outside the range) into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type double. Any value written into the Tcl variable must have a proper real form acceptable to Tcl_GetDoubleFromObj; attempts to write non-real values into varName will be rejected with Tcl errors. Incomplete integer or real representations (like the empty string, '.', '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type float. Any value written into the Tcl variable must have a proper real form acceptable to Tcl_GetDoubleFromObj and must be within the range acceptable for a float; attempts to write non-real values (or values outside the range) into varName will be rejected with Tcl errors. Incomplete integer or real representations (like the empty string, '.', '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type Tcl_WideInt (which is an integer type at least 64-bits wide on all platforms that can support it.) Any value written into the Tcl variable must have a proper integer form acceptable to Tcl_GetWideIntFromObj; attempts to write non-integer values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type Tcl_WideUInt (which is an unsigned integer type at least 64-bits wide on all platforms that can support it.) Any value written into the Tcl variable must have a proper unsigned integer form acceptable to Tcl_GetWideIntFromObj (it will be cast to unsigned); attempts to write non-integer values into varName will be rejected with Tcl errors. Incomplete integer representations (like the empty string, '+', '-' or the hex/octal/decimal/binary prefix) are accepted as if they are valid too.
The C variable, or each element of the C array, is of type int. If its value is zero then it will read from Tcl as “0”; otherwise it will read from Tcl as “1”. Whenever varName is modified, the C variable will be set to a 0 or 1 value. Any value written into the Tcl variable must have a proper boolean form acceptable to Tcl_GetBooleanFromObj; attempts to write non-boolean values into varName will be rejected with Tcl errors.
The C variable is of type char *. If its value is not NULL then it must be a pointer to a string allocated with Tcl_Alloc or ckalloc. Whenever the Tcl variable is modified the current C string will be freed and new memory will be allocated to hold a copy of the variable's new value. If the C variable contains a NULL pointer then the Tcl variable will read as “NULL”. This is only supported by Tcl_LinkVar.

If the TCL_LINK_READ_ONLY flag is present in type then the variable will be read-only from Tcl, so that its value can only be changed by modifying the C variable. Attempts to write the variable from Tcl will be rejected with errors.

Tcl_UnlinkVar removes the link previously set up for the variable given by varName. If there does not exist a link for varName then the procedure has no effect.

Tcl_UpdateLinkedVar may be invoked after the C variable has changed to force the Tcl variable to be updated immediately. In many cases this procedure is not needed, since any attempt to read the Tcl variable will return the latest value of the C variable. However, if a trace has been set on the Tcl variable (such as a Tk widget that wishes to display the value of the variable), the trace will not trigger when the C variable has changed. Tcl_UpdateLinkedVar ensures that any traces on the Tcl variable are invoked.

Note that, as with any call to a Tcl interpreter, Tcl_UpdateLinkedVar must be called from the same thread that created the interpreter. The safest mechanism is to ensure that the C variable is only ever updated from the same thread that created the interpreter (possibly in response to an event posted with Tcl_ThreadQueueEvent), but when it is necessary to update the variable in a separate thread, it is advised that Tcl_AsyncMark be used to indicate to the thread hosting the interpreter that it is ready to run Tcl_UpdateLinkedVar.

SEE ALSO

Tcl_TraceVar(3tcl)

KEYWORDS

boolean, integer, link, read-only, real, string, trace, variable

7.5 Tcl