The sections below detail options that can be placed in
the
/etc/imapd.conf file, and show each option's default value. Some
options have no default value, these are listed with ``<no default>''.
Some options default to the empty string, these are listed with
``<none>''.
acl_admin_implies_write: 0
If enabled, any user with the admin ACL on a mailbox
implicitly gets the ability to write to that mailbox as well.
addressbookprefix: #addressbooks
The prefix for the addressbook mailboxes hierarchies. The
hierarchy delimiter will be automatically appended. The public addressbook
hierarchy will be at the toplevel of the shared namespace. A user's personal
addressbook hierarchy will be a child of their Inbox.
admins: <empty string>
The list of userids with administrative rights. Separate
each userid with a space. Sites using Kerberos authentication may use separate
"admin" instances.
Note that accounts used by users should not be administrators.
Administrative accounts should not receive mail. That is, if user
"jbRo" is a user reading mail, he should not also be in the admins
line. Some problems may occur otherwise, most notably the ability of
administrators to create top-level mailboxes visible to users, but not
writable by users.
afspts_localrealms: <none>
The list of realms which are to be treated as local, and
thus stripped during identifier canonicalization (for the AFSPTS ptloader
module). This is different from loginrealms in that it occurs later in the
authorization process (as the user id is canonified for PTS lookup).
afspts_mycell: <none>
Cell to use for AFS PTS lookups. Defaults to the local
cell.
allowallsubscribe: 0
Allow subscription to nonexistent mailboxes. This option
is typically used on backend servers in a Murder so that users can subscribe
to mailboxes that don't reside on their "home" server. This option
can also be used as a workaround for IMAP clients which don't play well with
nonexistent or unselectable mailboxes (e.g., Microsoft Outlook).
allowanonymouslogin: 0
Permit logins by the user "anonymous" using any
password. Also allows use of the SASL ANONYMOUS mechanism.
allowapop: 1
Allow use of the POP3 APOP authentication command.
Note that this command requires that SASL is compiled with APOP
support, that the plaintext passwords are available in a SASL auxprop
backend (e.g., sasldb), and that the system can provide enough entropy
(e.g., from /dev/urandom) to create a challenge in the banner.
allowdeleted: 0
Allow access to deleted and expunged data via
vendor.cmu-* access.
allownewnews: 0
Allow use of the NNTP NEWNEWS command.
Note that this is a very expensive command and should only be
enabled when absolutely necessary.
allowplaintext: 0
If enabled, allows the use of cleartext passwords on the
wire.
By default, the use of cleartext passwords requires a TLS/SSL
encryption layer to be negotiated prior to any cleartext authentication
mechanisms being advertised or allowed. To require a TLS/SSL encryption
layer to be negotiated prior to ANY authentication, see the
tls_required option.
allowsetacl: 1
Defaults to enabled. If disabled, disallows the use of
the SETACL command at all via IMAP.
allowusermoves: 0
Allow moving user accounts (with associated meta-data)
via RENAME or XFER.
Note that measures should be taken to make sure that the user
being moved is not logged in, and cannot login during the move. Failure to
do so may result in the user's meta-data (seen state, subscriptions, etc)
being corrupted or out of date.
altnamespace: 1
Use the alternate IMAP namespace, where personal folders
reside at the same level in the hierarchy as INBOX.
This option ONLY applies where interaction takes place with the
client/user. Currently this is limited to the IMAP protocol (imapd) and
Sieve scripts (lmtpd). This option does NOT apply to admin tools such as
cyradm (admins ONLY), reconstruct, quota, etc., NOR does it affect LMTP
delivery of messages directly to mailboxes via plus-addressing. The default
changed in 3.0 from off to on.
altprefix: Alt Folders
Alternative INBOX spellings that can't be accessed in
altnamespace otherwise go under here
annotation_db: twoskip
The cyrusdb backend to use for mailbox annotations.
Allowed values: skiplist, twoskip,
zeroskip
annotation_db_path: <none>
The absolute path to the annotations db file. If not
specified, will be configdirectory/annotations.db
anyoneuseracl: 1
Should non-admin users be allowed to set ACLs for the
'anyone' user on their mailboxes? In a large organization this can cause
support problems, but it's enabled by default.
annotation_allow_undefined: 0
Allow clients to store values for entries which are not
defined either by Cyrus or in the annotations_definitions file.
annotation_definitions: <none>
File containing external (third-party) annotation
definitions.
Each line of the file specifies the properties of an annotation
and has the following form:
name, scope, attrib-type,
proxy-type, attrib-names, acl
- name
- is the hierarchical name as in RFC 5257 or RFC 5464 (in the
latter case, without the leading /shared or /private). For
example, /vendor/acme/blurdybloop.
- scope
- specifies whether the annotation is for the server, a
mailbox, or a message.
- attrib-type
specifies the attribute data type, which is used only to
check the string value passed by clients when setting annotations. The
attrib-type is one of:
- string
- any value is accepted.
- content-type
- this obsolete data type, which was useful for early drafts of the
standard, is accepted but silently translated to string.
- boolean
- only the strings "true" or "false" are accepted.
Checking is case-insensitive but the value is forced to lowercase.
- int
- integers are accepted.
- uint
- non-negative integers are accepted.
- proxy-type
- specifies whether this attribute is for the backend or proxy
servers or both (proxy_and_backend)
- attrib-names
- is the space-separated list of available attributes for the annotation.
Possible attribute names are value.shared, value.priv, and
value (which permits both value.priv and
value.shared). The attribute names size, size.shared,
and size.priv are accepted but ignored; these attributes are
automatically provided by the server if the corresponding value
attribute is specified. Some obsolete attributes, which were defined early
drafts of the standard, are accepted and ignored with a warning.
- is the extra ACL permission bits required for setting this annotation, in
standard IMAP ACL permission bit string format. Note that this is in
addition to the permission bits specified in RFC 5257 and RFC
5464, so leaving this field empty is harmless. Note also that there is
no way to specify that an annotation can only be set by an admin user; in
particular the a permission bit does not achieve this.
Blank lines and lines beginning with ``#'' are ignored.
annotation_callout: <none>
The pathname of a callout to be used to automatically add
annotations or flags to a message when it is appended to a mailbox. The path
can be either an executable (including a script), or a UNIX domain
socket.
annotation_callout_disable_append: 0
Disables annotations on append with xrunannotator.
annotation_enable_legacy_commands: 0
Whether to enable the legacy GETANNOTATION/SETANNOTATION
commands. These commands are deprecated and will be removed in the future, but
might be useful in the meantime for supporting old clients that do not
implement the RFC 5464 IMAP METADATA extension.
aps_topic: <none>
Topic for Apple Push Service registration.
aps_topic_caldav: <none>
Topic for Apple Push Service registration for
CalDAV.
aps_topic_carddav: <none>
Topic for Apple Push Service registration for
CardDAV.
aps_expiry: 1d
Time after which a CalDAV/CardDAV push subscription will
expire. A client will have to refresh the subscription in order to continue to
receive push notifications.
archive_enabled: 0
Is archiving enabled for this server. You also need to
have an archivepartition for the mailbox. Archiving allows older email to be
stored on slower, cheaper disks - even within the same mailbox, as distinct
from partitions.
archive_days: <none>
Deprecated in favour of archive_after.
archive_after: 7d
The duration after which to move messages to the archive
partition if archiving is enabled.
For backward compatibility, if no unit is specified, days is
assumed.
archive_maxsize: 1024 K
The size of the largest message that won't be archived
immediately.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
archive_keepflagged: 0
If set, messages with the \Flagged system flag won't be
archived, provided they are smaller than archive_maxsize.
archivepartition-name: <none>
The pathname of the archive partition name,
corresponding to spool partition partition-name. For any mailbox
residing in a directory on partition-name, the archived messages will
be stored in a corresponding directory on archivepartition-name. Note
that not every partition-name option is strictly required to have a
corresponding archivepartition-name option, but that without one
there's no benefit to enabling archiving.
auditlog: 0
Should cyrus output log entries for every action taken on
a message file or mailboxes list entry? It's noisy so disabled by default, but
can be very useful for tracking down what happened if things look
strange.
auth_mech: unix
The authorization mechanism to use.
Allowed values: unix, pts, krb,
krb5
autocreateinboxfolders: <none>
Deprecated in favor of
autocreate_inbox_folders.
autocreatequota: <none>
Deprecated in favor of autocreate_quota.
autocreatequotamsg: -1
Deprecated in favor of
autocreate_quota_messages.
autosievefolders: <none>
Deprecated in favor of
autocreate_sieve_folders.
generate_compiled_sieve_script: 0
Deprecated in favor of
autocreate_sieve_script_compile.
autocreate_sieve_compiled_script: <none>
Deprecated in favor of
autocreate_sieve_script_compiled.
autosubscribeinboxfolders: <none>
Deprecated in favor of
autocreate_subscribe_folders.
autosubscribesharedfolders: <none>
Deprecated in favor of
autocreate_subscribe_sharedfolders.
autosubscribe_all_sharedfolders: 0
Deprecated in favor of
autocreate_subscribe_sharedfolders_all.
autocreate_acl: <none>
If folders are to be created by
autocreate_inbox_folders, this setting can be used to apply additional
ACLs to the autocreated folders. The syntax is "autocreate_acl folder
identifier rights", where
folder must match one of the
autocreate_inbox_folders folders,
identifier must be a valid
cyrus identifier, and
rights must be a valid cyrus rights string.
Multiple identifier|rights pairs can be assigned to a single folder by
providing this setting multiple times.
For example, "autocreate_acl Plus anyone p" would allow
lmtp delivery to a folder named "Plus".
autocreate_inbox_folders: <none>
If a user does not have an INBOX already, and the INBOX
is to be created, create the list of folders in this setting as well.
autocreate_inbox_folders is a list of INBOX's subfolders separated by a
"|", that are automatically created by the server under the
following two scenarios. Leading and trailing whitespace is stripped, so
"Junk | Trash" results in two folders: "Junk" and
"Trash". See also the
xlist-flag option, for setting
special-use flags on autocreated folders.
INBOX folders are created under both the following conditions:
- 1.
- The user logins via the IMAP or the POP3 protocol. autocreate_quota
option must have a value of zero or greater.
- 2.
- A message arrives for the user through the lmtpd(8).
autocreate_post option must be enabled.
autocreate_post: 0
If enabled, when lmtpd(8) receives an incoming
mail for an INBOX that does not exist, then the INBOX is automatically created
by lmtpd(8) and delivery of the message continues.
autocreate_quota: -1
If set to a value of zero or higher, users have their
INBOX folders created upon a successful login event or upon
lmtpd(8)
message delivery if
autocreate_post is enabled, provided their INBOX
did not yet already exist.
The user's quota is set to the value if it is greater than zero,
otherwise the user has unlimited quota.
Note that quota has kibibyte granularity. Values specified here
will be truncated to the nearest whole kibibyte.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
autocreate_quota_messages: -1
If set to a value of zero or higher, users who have their
INBOX folders created upon a successful login event (see
autocreate_quota), or upon
lmtpd(8) message delivery if
autocreate_post is enabled, receive the message quota configured in
this option.
The default of -1 disables assigning message quota.
For consistency with autocreate_quota, a value of zero is
treated as unlimited message quota, rather than a message quota of zero.
autocreate_sieve_folders: <none>
A "|" separated list of subfolders of INBOX
that will be automatically created, if requested by a sieve filter, through
the "fileinto" action. The default is to create no folders
automatically.
Leading and trailing whitespace is stripped from each folder, so a
setting of "Junk | Trash" will create two folders:
"Junk" and "Trash".
autocreate_sieve_script: <none>
The full path of a file that contains a sieve script.
This script automatically becomes a user's initial default sieve filter
script.
When this option is not defined, no default sieve filter is
created. The file must be readable by the Cyrus daemon.
autocreate_sieve_script_compile: 0
If set to yes and no compiled sieve script file exists,
the sieve script which is compiled on the fly will be saved in the file name
that autocreate_sieve_compiledscript option points to. In order a compiled
script to be generated, autocreate_sieve_script and
autocreate_sieve_compiledscript must have valid values.
autocreate_sieve_script_compiled: <none>
The full path of a file that contains a compiled in
bytecode sieve script. This script automatically becomes a user's initial
default sieve filter script. If this option is not specified, or the filename
doesn't exist then the script defined by autocreate_sieve_script is compiled
on the fly and installed as the user's default sieve script.
autocreate_subscribe_folders: <none>
A list of folder names, separated by "|", that
the users get automatically subscribed to, when their INBOX is created. These
folder names must have been included in the autocreateinboxfolders option of
the imapd.conf.
autocreate_subscribe_sharedfolders: <none>
A list of shared folders (bulletin boards), separated by
"|", that the users get automatically subscribed to, after their
INBOX is created. The shared folder must have been created and the user must
have the required permissions to get subscribed to it. Otherwise, subscribing
to the shared folder fails.
autocreate_subscribe_sharedfolders_all: 0
If set to yes, the user is automatically subscribed to
all shared folders, one has permission to subscribe to.
autocreate_users: anyone
A space separated list of users and/or groups that are
allowed their INBOX to be automatically created.
autoexpunge: 0
If set to yes, then all Deleted messages will be
automatically expunged whenever an index is closed, whether CLOSE, UNSELECT,
SELECT or on disconnect.
backuppartition-name: <none>
The pathname of the backup partition name. At
least one backup partition pathname MUST be specified if backups are in use.
Note that there is no relationship between spool partitions and backup
partitions.
backup_compact_minsize: 0
The minimum size of chunks in each backup. The compact
tool will try to combine adjacent chunks that are smaller than this.
Setting this value to zero or negative disables combining of
chunks.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
backup_compact_maxsize: 0
The maximum size of chunks in each backup. The compact
tool will try to split chunks larger than this into smaller chunks.
Setting this value to zero or negative disables splitting of
chunks.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
backup_compact_work_threshold: 1
The number of chunks that must obviously need compaction
before the compact tool will go ahead with the compaction. If set to less than
one, the value is treated as being one.
backup_staging_path: <none>
The absolute path of the backup staging area. If not
specified, will be temp_path/backup
backup_retention_days: <none>
Deprecated in favor of backup_retention.
backup_retention: 7d
How long to keep content in backup after it has been
deleted from the source. If set to a negative value or zero, deleted content
will be kept indefinitely.
For backward compatibility, if no unit is specified, days is
assumed.
backup_db: twoskip
The cyrusdb backend to use for the backup locations
database.
Allowed values: skiplist, sql, twoskip,
zeroskip
backup_db_path: <none>
The absolute path to the backup db file. If not
specified, will be configdirectory/backups.db
backup_keep_previous: 0
Whether the
ctl_backups compact and
ctl_backups
reindex commands should preserve the original file. The original file will
be named with a timestamped suffix. This is mostly useful for debugging.
Note that with this enabled, compacting a backup will actually
increase the disk used by it (because there will now be an extra copy: the
original version, and the compacted version).
boundary_limit: 1000
messages are parsed recursively and a deep enough MIME
structure can cause a stack overflow. Do not parse deeper than this many
layers of MIME structure. The default of 1000 is much higher than any sane
message should have.
caldav_accept_invalid_rrules: 0
Accept invalid RRULEs (e.g. FREQ=WEEKLY;BYMONTHDAY=15)
rather than rejecting them as errors.
caldav_allowattach: 1
Enable managed attachments support on the CalDAV
server.
caldav_allowcalendaradmin: 0
Enable per-user calendar administration web UI on the
CalDAV server.
caldav_allowscheduling: on
Enable calendar scheduling operations. If set to
"apple", the server will emulate Apple CalendarServer behavior as
closely as possible. Allowed values: off, on, apple
caldav_create_attach: 1
Create the 'Attachments' collection if it doesn't already
exist.
caldav_create_default: 1
Create the 'Default' calendar if it doesn't already
exist.
caldav_create_sched: 1
Create the 'Inbox' and 'Outbox' calendars if they don't
already exist.
caldav_historical_age: 7d
How long after an occurrence of event or task has
concluded that it is considered 'historical'. Changes to historical
occurrences of events or tasks WILL NOT have invite or reply messages sent for
them. A negative value means that events and tasks are NEVER considered
historical.
For backward compatibility, if no unit is specified, days is
assumed.
caldav_maxdatetime: 20380119T031407Z
The latest date and time accepted by the server (ISO
format). This value is also used for expanding non-terminating recurrence
rules.
Note that increasing this value will require the DAV databases for
calendars to be reconstructed with the dav_reconstruct utility in
order to see its effect on serer-side time-based queries.
caldav_mindatetime: 19011213T204552Z
The earliest date and time accepted by the server (ISO
format).
caldav_realm: <none>
The realm to present for HTTP authentication of CalDAV
resources. If not set (the default), the value of the "servername"
option will be used.
calendarprefix: #calendars
The prefix for the calendar mailboxes hierarchies. The
hierarchy delimiter will be automatically appended. The public calendar
hierarchy will be at the toplevel of the shared namespace. A user's personal
calendar hierarchy will be a child of their Inbox.
calendar_default_displayname: personal
The displayname to be used when creating a user's
'Default' calendar.
calendar_user_address_set: <none>
Space-separated list of domains corresponding to calendar
user addresses for which the server is responsible. If not set (the default),
the value of the "servername" option will be used.
calendar_component_set: VEVENT VTODO VJOURNAL VFREEBUSY
VAVAILABILITY VPOLL
Space-separated list of iCalendar component types that
calendar object resources may contain in a calendar collection. This
restriction is only set at calendar creation time and only if the CalDAV
client hasn't specified a restriction in the creation request. Allowed values:
VEVENT, VTODO, VJOURNAL, VFREEBUSY,
VAVAILABILITY, VPOLL
calendar_minimum_alarm_interval: 5m
The minimum allowed interval between alarms for a
recurring event. Primarily used to suppress alarms for MINUTELY and SECONDLY
recurrences. The default is 5 minutes. The minimum value is 0, which will
allow all alarms.
carddav_allowaddmember: 0
Enable support for POST add-member on the CardDAV
server.
carddav_allowaddressbookadmin: 0
Enable per-user addressbook administration web UI on the
CardDAV server.
carddav_realm: <none>
The realm to present for HTTP authentication of CardDAV
resources. If not set (the default), the value of the "servername"
option will be used.
carddav_repair_vcard: 0
If enabled, VCARDs with invalid content are attempted to
be repaired during creation.
chatty: 0
If yes, syslog tags and commands for every IMAP command,
mailboxes for every LMTP connection, every POP3 command, etc.
client_bind: 0
If enabled, a specific IP will be bound when performing a
client connection.
client_bind_name is used if it is set, otherwise
servername is used. This is useful on multi-homed servers where Cyrus
should not use other services' interfaces.
If not enabled (the default), no bind will be performed. Client
connections will use an IP chosen by the operating system.
client_bind_name: <none>
IPv4, IPv6 address or hostname to bind for client
connections when client_bind is enabled. If not set (the default),
servername will be used.
client_timeout: 10s
Time to wait before returning a timeout failure when
performing a client connection (e.g. in a murder environment).
For backward compatibility, if no unit is specified, seconds is
assumed.
commandmintimer: <none>
Time in floating point seconds. Any imap command that
takes longer than this time is logged.
configdirectory: <none>
The pathname of the IMAP configuration directory. This
field is required.
createonpost: 0
Deprecated in favor of autocreate_post.
conversations: 0
Enable the XCONVERSATIONS extensions. Extract
conversation tracking information from incoming messages and track them in
per-user databases.
conversations_counted_flags: <none>
space-separated list of flags for which per-conversation
counts will be kept. Note that you need to reconstruct the conversations
database with ctl_conversationsdb if you change this option on a running
server, or the counts will be wrong.
conversations_db: skiplist
The cyrusdb backend to use for the per-user conversations
database.
Allowed values: skiplist, sql, twoskip,
zeroskip
conversations_expire_days: <none>
Deprecated in favor of
conversations_expire_after.
conversations_expire_after: 90d
How long the conversations database keeps the message
tracking information needed for receiving new messages in existing
conversations.
For backward compatibility, if no unit is specified, days is
assumed.
conversations_keep_existing: 1
during conversations cleanup, don't clean up if there are
still existing emails with one of the mentioned CIDs.
conversations_max_thread: 100
maximum size for a single thread. Threads will split if
they have this many messages in them and another message arrives.
conversations_max_guidrecords: 5000
maximum records with the same guid. This is just a sanity
check to stop the same email being added and removed over and over, so the
default is 5000
conversations_max_guidexists: 100
maximum records with the same guid. This maps to
"labels", so with the default of 100, you can only have 100 labels
on an email in JMAP.
conversations_max_guidinfolder: 10
maximum records with the same guid in the same folder.
You can't do this via JMAP, but could via IMAP. The default of 10 should be
heaps normally!
crossdomains: 0
Enable cross domain sharing. This works best with alt
namespace and unix hierarchy separators on, so you get Other
Users/foo@example.com/...
crossdomains_onlyother: 0
only show the domain for users in other domains than your
own (for backwards compatibility if you're already sharing.
cyrus_group: <none>
The name of the group Cyrus services will run as. If not
configured, the primary group of cyrus_user will be used. Can be further
overridden by setting the $CYRUS_GROUP environment variable.
cyrus_user: <none>
The username to use as the 'cyrus' user. If not
configured, the compile time default will be used. Can be further overridden
by setting the $CYRUS_USER environment variable.
davdriveprefix: #drive
The prefix for the DAV storage mailboxes hierarchies. The
hierarchy delimiter will be automatically appended. The public storage
hierarchy will be at the toplevel of the shared namespace. A user's personal
storage hierarchy will be a child of their Inbox.
davnotificationsprefix: #notifications
The prefix for the DAV notifications hierarchy. The
hierarchy delimiter will be automatically appended. The public notifications
hierarchy will be at the toplevel of the shared namespace. A user's personal
notifications hierarchy will be a child of their Inbox.
dav_realm: <none>
The realm to present for HTTP authentication of generic
DAV resources (principals). If not set (the default), the value of the
"servername" option will be used.
dav_lock_timeout: 20s
The maximum time to wait for a write lock on the per-user
DAV database before timeout. For HTTP requests, the HTTP status code 503 is
returned if the lock can not be obtained within this time.
For backward compatibility, if no unit is specified, seconds is
assumed.
debug: 0
If enabled, allow syslog() to pass LOG_DEBUG
messages.
debug_command: <none>
Debug command to be used by processes started with -D
option. The string is a C format string that gets 3 options: the first is the
name of the executable (as specified in the cmd parameter in cyrus.conf). The
second is the pid (integer) and the third is the service ID. Example:
/usr/local/bin/gdb /usr/cyrus/bin/%s %d
debug_log_sync_partition_choice: 0
If enabled, replication will log which partition it chose
for staging. This is mainly useful for regression testing the sync_client -a
switch.
debug_writefail_guid: <none>
If set, any arriving message with this guid will fail as
if the underlying disk write had failed, pretending to be a disk full
condition. This is mainly useful for regression testing certain edge case
handling. Currently only implemented for replication uploads.
defaultacl: anyone lrs
The Access Control List (ACL) placed on a newly-created
(non-user) mailbox that does not have a parent mailbox.
defaultdomain: internal
The default domain for virtual domain support.
defaultpartition: <none>
The partition name used by default for new mailboxes. If
not specified, the partition with the most free space will be used for new
mailboxes.
Note that the partition specified by this option must also be
specified as partition-name, where you substitute 'name' for the
alphanumeric string you set defaultpartition to.
defaultsearchtier: <empty string>
Name of the default tier that messages will be indexed
to. Search indexes can be organized in tiers to allow index storage in
different directories and physical media. See the man page of squatter for
details. The default search tier also requires the definition of an according
searchtierpartition-name entry.
This option MUST be specified for xapian search.
defaultserver: <none>
The backend server name used by default for new
mailboxes. If not specified, the server with the most free space will be used
for new mailboxes.
deletedprefix: DELETED
With
delete_mode set to
delayed, the
deletedprefix setting defines the prefix for the hierarchy of deleted
mailboxes.
The hierarchy delimiter will be automatically appended.
delete_mode: delayed
The manner in which mailboxes are deleted. In the default
delayed mode, mailboxes that are being deleted are renamed to a special
mailbox hierarchy under the
deletedprefix, to be removed later by
cyr_expire(8).
In immediate mode, the mailbox is removed from the
filesystem immediately.
Allowed values: immediate, delayed
delete_unsubscribe: 0
Whether to also unsubscribe from mailboxes when they are
deleted. Note that this behaviour contravenes RFC 3501 section 6.3.9,
but may be useful for avoiding user/client software confusion. The default is
'no'.
deleteright: c
Deprecated - only used for backwards compatibility with
existing installations. Lists the old RFC 2086 right which was used to
grant the user the ability to delete a mailbox. If a user has this right, they
will automatically be given the new 'x' right.
disable_user_namespace: 0
Preclude list command on user namespace. If set to 'yes',
the LIST response will never include any other user's mailbox. Admin users
will always see all mailboxes. The default is 'no'
disable_shared_namespace: 0
Preclude list command on shared namespace. If set to
'yes', the LIST response will never include any non-user mailboxes. Admin
users will always see all mailboxes. The default is 'no'
disconnect_on_vanished_mailbox: 0
If enabled, IMAP/POP3/NNTP clients will be disconnected
by the server if the currently selected mailbox is (re)moved by another
session. Otherwise, the missing mailbox is treated as empty while in use by
the client.
ischedule_dkim_domain: <none>
The domain to be reported as doing iSchedule DKIM
signing.
ischedule_dkim_key_file: <none>
File containing the private key for iSchedule DKIM
signing.
ischedule_dkim_required: 1
A DKIM signature is required on received iSchedule
requests.
ischedule_dkim_selector: <none>
Name of the selector subdividing the domain namespace.
This specifies the actual key used for iSchedule DKIM signing within the
domain.
duplicate_db: twoskip
The cyrusdb backend to use for the duplicate delivery
suppression and sieve. Allowed values: skiplist, sql,
twoskip, zeroskip
duplicate_db_path: <none>
The absolute path to the duplicate db file. If not
specified, will be configdirectory/deliver.db
duplicatesuppression: 1
If enabled, lmtpd will suppress delivery of a message to
a mailbox if a message with the same message-id (or resent-message-id) is
recorded as having already been delivered to the mailbox. Records the mailbox
and message-id/resent-message-id of all successful deliveries.
event_content_inclusion_mode: standard
The mode in which message content may be included with
MessageAppend and MessageNew. "standard" mode is the default
behavior in which message is included up to a size with the notification. In
"message" mode, the message is included and may be truncated to a
size. In "header" mode, it includes headers truncated to a size. In
"body" mode, it includes body truncated to a size. In
"headerbody" mode, it includes full headers and body truncated to a
size. Allowed values: standard, message, header,
body, headerbody
event_content_size: 0
Truncate the message content that may be included with
MessageAppend and MessageNew. Set 0 to include the entire message itself.
If no unit is specified, bytes is assumed.
event_exclude_flags: <none>
Don't send event notification for given IMAP
flag(s).
event_exclude_specialuse: \Junk
Don't send event notification for folder with given
special-use attributes. Set ALL for any folder.
event_extra_params: timestamp
Space-separated list of extra parameters to add to any
appropriated event.
Allowed values: bodyStructure, clientAddress,
diskUsed, flagNames, messageContent,
messageSize, messages, modseq, service,
timestamp, uidnext, vnd.cmu.midset,
vnd.cmu.unseenMessages, vnd.cmu.envelope,
vnd.cmu.sessionId, vnd.cmu.mailboxACL, vnd.cmu.mbtype,
vnd.cmu.davFilename, vnd.cmu.davUid,
vnd.fastmail.clientId, vnd.fastmail.sessionId,
vnd.fastmail.convExists, vnd.fastmail.convUnseen,
vnd.fastmail.cid, vnd.fastmail.counters,
vnd.fastmail.jmapEmail, vnd.fastmail.jmapStates,
vnd.cmu.emailid, vnd.cmu.threadid
event_groups: message mailbox
Space-separated list of groups of related events to turn
on notification.
Allowed values: message, quota, flags,
access, mailbox, subscription, calendar,
applepushservice, jmap
event_notifier: <none>
Notifyd(8) method to use for "EVENT"
notifications which are based on the RFC 5423. If not set,
"EVENT" notifications are disabled.
expunge_mode: delayed
The mode in which messages (and their corresponding cache
entries) are expunged. "semidelayed" mode is the old behavior in
which the message files are purged at the time of the EXPUNGE, but index and
cache records are retained to facilitate QRESYNC. In "delayed" mode,
which is the default since Cyrus 2.5.0, the message files are also retained,
allowing unexpunge to rescue them. In "immediate" mode, both the
message files and the index records are removed as soon as possible. In all
cases, nothing will be finally purged until all other processes have closed
the mailbox to ensure they never see data disappear under them. In
"semidelayed" or "delayed" mode, a later run of
"cyr_expire" will clean out the retained records (and possibly
message files). This reduces the amount of I/O that takes place at the time of
EXPUNGE and should result in greater responsiveness for the client, especially
when expunging a large number of messages. Allowed values: immediate,
semidelayed, delayed
failedloginpause: 3s
Time to pause after a failed login.
For backward compatibility, if no unit is specified, seconds is
assumed.
flushseenstate: 1
Deprecated. No longer used.
foolstupidclients: 0
If enabled, only list the personal namespace when a LIST
"*" is performed (it changes the request to a LIST
"INBOX*").
force_sasl_client_mech: <none>
Force preference of a given SASL mechanism for client
side operations (e.g., murder environments). This is separate from (and
overridden by) the ability to use the <host shortname>_mechs option to
set preferred mechanisms for a specific host.
fulldirhash: 0
If enabled, uses an improved directory hashing scheme
which hashes on the entire username instead of using just the first letter as
the hash. This changes hash algorithm used for quota and user directories and
if
hashimapspool is enabled, the entire mail spool.
Note that this option CANNOT be changed on a live system. The
server must be quiesced and then the directories moved with the
rehash utility.
hashimapspool: 0
If enabled, the partitions will also be hashed, in
addition to the hashing done on configuration directories. This is recommended
if one partition has a very bushy mailbox tree.
hostname_mechs: <none>
Force a particular list of SASL mechanisms to be used
when authenticating to the backend server hostname (where hostname is the
short hostname of the server in question). If it is not specified it will
query the server for available mechanisms and pick one to use. - Cyrus
Murder
hostname_password: <none>
The password to use for authentication to the backend
server hostname (where hostname is the short hostname of the server) - Cyrus
Murder
httpallowcompress: 1
If enabled, the server will compress response payloads if
the client indicates that it can accept them. Note that the compressed data
will appear in telemetry logs, leaving only the response headers as
human-readable.
httpallowcors: <none>
A wildmat pattern specifying a list of origin URIs (
scheme "://" host [ ":" port ] ) that are allowed to make
Cross-Origin Resource Sharing (CORS) requests on the server. By default, CORS
requests are disabled.
Note that the scheme and host should both be lowercase, the port
should be omitted if using the default for the scheme (80 for http, 443 for
https), and there should be no trailing '/' (e.g.:
"http://www.example.com:8080",
"https://example.org").
httpallowtrace: 0
Allow use of the TRACE method.
Note that sensitive data might be disclosed by the response.
httpallowedurls: <none>
Space-separated list of relative URLs (paths) rooted at
"httpdocroot" (see below) to be served by httpd. If set, this option
will limit served static content to only those paths specified (returning
"404 Not Found" to any other client requested URLs). Otherwise,
httpd will serve any content found in "httpdocroot".
Note that any path specified by "rss_feedlist_template"
is an exception to this rule.
httpcontentmd5: 0
If enabled, HTTP responses will include a Content-MD5
header for the purpose of providing an end-to-end message integrity check
(MIC) of the payload body. Note that enabling this option will use additional
CPU to generate the MD5 digest, which may be ignored by clients anyways.
httpdocroot: <none>
If set, http will serve the static content
(html/text/jpeg/gif files, etc) rooted at this directory. Otherwise, httpd
will not serve any static content.
httpkeepalive: 20s
Set the length of the HTTP server's keepalive heartbeat.
The default is 20 seconds. The minimum value is 0, which will disable the
keepalive heartbeat. When enabled, if a request takes longer than
httpkeepalive to process, the server will send the client provisional
responses every
httpkeepalive until the final response can be sent.
For backward compatibility, if no unit is specified, seconds is
assumed.
httplogheaders: <none>
Space-separated list of HTTP header fields that will be
included in the requests logged by httpd(8).
httpmodules: <empty string>
Space-separated list of HTTP modules that will be enabled
in httpd(8). This option has no effect on modules that are disabled at compile
time due to missing dependencies (e.g. libical).
Note that "domainkey" depends on "ischedule"
being enabled, and that both "freebusy" and "ischedule"
depend on "caldav" being enabled. Allowed values: admin,
caldav, carddav, cgi, domainkey,
freebusy, ischedule, jmap, prometheus,
rss, tzdist, webdav
httpprettytelemetry: 0
If enabled, HTTP response payloads including
server-generated markup languages (HTML, XML) will utilize line breaks and
indentation to promote better human-readability in telemetry logs. Note that
enabling this option will increase the amount of data sent across the
wire.
httppts_uri: <none>
The URL endpoint to use when for querying group
membership, in URI Template (level 1) format [RFC 6570]. The URL MUST
contain a variable called "groupId"
httptimeout: 5m
Set the length of the HTTP server's inactivity autologout
timer. The default is 5 minutes. The minimum value is 0, which will disable
persistent connections.
For backwards compatibility, if no unit is specified, minutes is
assumed.
http_h2_altsvc: <none>
If set, HTTP/2 (over TLS) will be advertised as being
available on the specified [host]:port.
http_jwt_key_dir: <none>
The absolute path to a directory containing one or more
key files to authenticate JSON Web Tokens (
RFC 7519) for HTTP
connections. Keys for the following JWS algorithms are supported:
"HS256", "HS384", "HS512", "RS256",
"RS384", "RS512".
A key file consists of one or more keys encoded in PEM format. RSA
keys must be embedded between the lines "-----BEGIN PUBLIC
KEY-----" and "-----END PUBLIC KEY-----" HMAC digest keys
must be embedded between the lines "-----BEGIN HMAC KEY-----" and
"-----END HMAC KEY-----", encoded in base64. Any lines before or
after a PEM key definition are ignored, empty lines are ignored anywhere in
the file.
The JSON Web Token must be the value of the HTTP
"Authorization" header, using the "Bearer"
authentication scheme. The JWS Header must include the "alg" and
"typ" parameter. A header with any other parameter is rejected.
The JWS Payload must include the "sub" claim with the Cyrus user
identifier as value. It may include the "iat" claim (see
http_jwt_max_age). A payload with any other claim is rejected.
http_jwt_max_age: 0s
Defines the timespan in which a JSON Web Token is valid
(see
http_jwt_key). The value must be zero or positive.
If non-zero, the timespan starts at the point in time specified in
the "iat" claim of the JWS Payload and ends after the duration of
this option value has passed. Tokens without an "iat" claim, or
with an issue date in the future, are rejected. There is no leeway for clock
skew. Starting from Cyrus version 3.8, the "iat" claim only is
validated if no "exp" claim is present.
The zero value disables validation of the "iat" JWS
claim.
Starting from Cyrus 3.8, the "nbf" and "exp"
claims always are validated.
icalendar_max_size: 0
Maximum allowed iCalendar size. CalDAV and JMAP will
reject storage of resources whose iCalendar representation is larger than
this.
If set to 0 (the default), a large internally-defined limit will
be applied.
If no unit is specified, bytes is assumed.
idlesocket: {configdirectory}/socket/idle
Unix domain socket that idled listens on.
ignorereference: 0
For backwards compatibility with Cyrus 1.5.10 and earlier
-- ignore the reference argument in LIST or LSUB commands.
imapidlepoll: 60s
The interval for polling for mailbox changes and ALERTs
while running the IDLE command. This option is used when idled is not enabled
or cannot be contacted. The minimum value is 1 second. A value of 0 will
disable IDLE.
For backward compatibility, if no unit is specified, seconds is
assumed.
imapidresponse: 1
If enabled, the server responds to an ID command with a
parameter list containing: version, vendor, support-url, os, os-version,
command, arguments, environment. Otherwise the server returns NIL.
imapmagicplus: 0
Only list a restricted set of mailboxes via IMAP by using
userid+namespace syntax as the authentication/authorization id. Using userid+
(with an empty namespace) will list only subscribed mailboxes.
imipnotifier: <none>
Notifyd(8) method to use for "IMIP"
notifications which are based on the RFC 6047. If not set,
"IMIP" notifications are disabled.
implicit_owner_rights: lkxan
The implicit Access Control List (ACL) for the owner of a
mailbox.
@include: <none>
Directive which includes the specified file as part of
the configuration. If the path to the file is not absolute, CYRUS_PATH is
prepended.
improved_mboxlist_sort: 0
If enabled, a special comparator will be used which will
correctly sort mailbox names that contain characters such as ' ' and '-'.
Note that this option SHOULD NOT be changed on a live system. The
mailboxes database should be dumped (ctl_mboxlist) before the option is
changed, removed, and then undumped after changing the option. When not
using flat files for the subscriptions databases the same has to be done
(cyr_dbtool) for each subscription database See
improved_mboxlist_sort.html.
jmap_emailsearch_db_path: <none>
The absolute path to the JMAP email search cache file. If
not specified, JMAP Email/query and Email/queryChanges will not cache email
search results.
jmap_querycache_max_age: 0m
The duration after which unused cached JMAP query results
must be evicted from process memory. If non-zero, then the full result of the
last query (before windowing) is stored in-memory. Subsequent queries with the
same expression and query state can then page through the cached result. A
zero value disables query result caching.
If no unit is specified, minutes is assumed.
This feature currently only is enabled for Email/query.
jmap_preview_annot: <none>
The name of the per-message annotation, if any, to store
message previews.
jmap_imagesize_annot: <none>
The name of the per-message annotation, if any, that
stores a JSON object, mapping message part numbers of MIME image types to an
array of their image dimensions. The array must have at least two entries,
where the first entry denotes the width and the second entry the height of the
image. Any additional values are ignored.
For example, if message part 1.2 contains an image of width 300
and height 200, then the value of this annotation would be:
{ "1.2" : [ 300, 200 ] }
jmap_inlinedcids_annot: <none>
The name of the per-message annotation, if any, that
stores a JSON object, mapping
RFC 2392 Content-IDs referenced in HTML
bodies to the respective HTML body part number.
For example, if message part 1.2 contains HTML and references an
inlined image at "cid:foo", then the value of this
annotation would be:
{ "<foo>" : "1.2" }
Note that the Content-ID key must be URL-unescaped and enclosed in
angular brackets, as defined in RFC 2392.
jmap_preview_length: 64B
The maximum length of dynamically generated message
previews. Previews stored in jmap_preview_annot take precedence.
If no unit is specified, bytes is assumed.
jmap_max_catenate_items: 100
The maximum number of items that can be catenated
together by a JMAP Blob/set action. Returned as the maxCatenateItems property
value of the JMAP "urn:ietf:params:jmap:blob" capabilities
object. Default value is 100.
jmap_max_size_upload: 1G
The maximum size that the JMAP API accepts for blob
uploads. Returned as the maxSizeUpload property value of the JMAP
"
urn:ietf:params:jmap:core" capabilities object.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
jmap_max_size_blob_set: 4M
The maximum size that the JMAP API accepts for Blob/set.
Returned as the maxSizeBlobSet property value of the JMAP
"
https://cyrusimap.org/ns/jmap/blob" capabilities object.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
jmap_max_calendareventnotifs: 200
The maximum count of CalendarEventNotification objects to
keep per account. Any notifications exceeding this count are expunged to make
room for new ones. Zero or any negative number disables this limit.
jmap_max_concurrent_upload: 5
The value to return for the maxConcurrentUpload property
of the JMAP "urn:ietf:params:jmap:core" capabilities object.
The Cyrus JMAP implementation does not enforce this rate-limit.
jmap_max_size_request: 10M
The maximum size that the JMAP API accepts for requests
at the API endpoint. Returned as the maxSizeRequest property value of the JMAP
"
urn:ietf:params:jmap:core" capabilities object.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
jmap_max_concurrent_requests: 5
The value to return for the maxConcurrentRequests
property of the JMAP "urn:ietf:params:jmap:core" capabilities
object. The Cyrus JMAP implementation does not enforce this rate-limit.
jmap_max_calls_in_request: 50
The maximum number of calls per JMAP request object.
Returned as the maxCallsInRequest property value of the JMAP
"urn:ietf:params:jmap:core" capabilities object.
jmap_max_delayed_send: 512d
The value to return for the maxDelayedSend property of
the JMAP "
urn:ietf:params:jmap:emailsubmission" capabilities
object. The Cyrus JMAP implementation does not enforce this limit.
For backward compatibility, if no unit is specified, seconds is
assumed.
jmap_max_objects_in_get: 4096
The maximum number of ids that a JMAP client may request
in a single "/get" type method call. The actual number of returned
objects in the response may exceed this number if the JMAP object type
supports unbounded "/get" calls. Returned as the maxObjectsInGet
property value of the JMAP "urn:ietf:params:jmap:core"
capabilities object.
jmap_max_objects_in_set: 4096
The maximum number of objects a JMAP client may send to
create, update or destroy in a single /set type method call. Returned as the
maxObjectsInSet property value of the JMAP
"urn:ietf:params:jmap:core" capabilities object.
jmap_mail_max_size_attachments_per_email: 10M
The value to return for the maxSizeAttachmentsPerEmail
property of the JMAP "
urn:ietf:params:jmap:mail" capabilities
object. The Cyrus JMAP implementation does not enforce this size limit.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
jmap_nonstandard_extensions: 0
If enabled, support non-standard JMAP extensions. If not
enabled, only IETF standard JMAP functionality is supported.
jmap_pushpoll: 60s
The interval for polling for changes on an EventSource
connection or when push has been ennabled on a WebSocket channel. The minimum
value is 1 second. A value of 0 will disable push.
If no unit is specified, seconds is assumed.
jmap_set_has_attachment: 1
If enabled, the $hasAttachment flag is determined and set
for new messages created with the JMAP Email/set or Email/import methods. This
option should typically be enabled, but installations using Cyrus-external
message annatotors to determine the $hasAttachment flag might want to disable
it.
jmap_vacation: 1
If enabled, support the JMAP vacation extension.
jmapuploadfolder: #jmap
the name of the folder for JMAP uploads (#jmap)
jmapsubmission_deleteonsend: 1
If enabled (the default) then delete the EmailSubmission
as soon as the email * has been sent.
jmapsubmissionfolder: #jmapsubmission
the name of the folder for JMAP Submissions
(#jmapsubmission)
jmappushsubscriptionfolder: #jmappushsubscription
the name of the folder for JMAP Push Subscriptions
(#jmappushsubscription)
jmapnotificationfolder: #jmapnotification
the name of the folder for JMAP notifications
(#jmapnotification)
iolog: 0
Should cyrus output I/O log entries.
ldap_authz: <none>
SASL authorization ID for the LDAP server.
ldap_base: <empty string>
Contains the LDAP base dn for the LDAP ptloader
module.
ldap_bind_dn: <none>
Bind DN for the connection to the LDAP server (simple
bind). Do not use for anonymous simple binds.
ldap_deref: never
Specify how aliases dereferencing is handled during
search.
Allowed values: search, find, always,
never
ldap_domain_base_dn: <empty string>
Base DN to search for domain name spaces.
ldap_domain_filter:
(&(objectclass=domainrelatedobject)(associateddomain=%s))
Filter to use searching for domains.
ldap_domain_name_attribute: associateddomain
The attribute name for domains.
ldap_domain_scope: sub
Search scope
Allowed values: sub, one, base
ldap_domain_result_attribute: inetdomainbasedn
ldap_filter: (uid=%u)
Specify a filter that searches user identifiers. The
following tokens can be used in the filter string:
%% = % %u = user %U = user portion of %u (%U = test when %u =
test@domain.tld) %d = domain portion of %u if available (%d =
domain.tld when %u = test@domain.tld), otherwise same as %R %R =
domain portion of %u starting with @ (%R = @domain.tld when %u =
test@domain.tld) %D = user dn. (use when ldap_member_method: filter)
%1-9 = domain tokens (%1 = tld, %2 = domain when %d = domain.tld)
ldap_filter is not used when ldap_sasl is enabled.
ldap_group_base: <empty string>
LDAP base dn for ldap_group_filter.
ldap_group_filter: (cn=%u)
Specify a filter that searches for group identifiers. See
ldap_filter for more options.
ldap_group_scope: sub
Specify search scope for ldap_group_filter.
Allowed values: sub, one, base
ldap_id: <none>
SASL authentication ID for the LDAP server
ldap_mech: <none>
SASL mechanism for LDAP authentication
ldap_user_attribute: <none>
Specify LDAP attribute to use as canonical user id.
ldap_member_attribute: <none>
ldap_member_base: <empty string>
LDAP base dn for ldap_member_filter.
ldap_member_filter: (member=%D)
Specify a filter for "ldap_member_method:
filter". See ldap_filter for more options.
ldap_member_method: attribute
Specify a group method. The "attribute" method
retrieves groups from a multi-valued attribute specified in
ldap_member_attribute.
The "filter" method uses a filter, specified by
ldap_member_filter, to find groups; ldap_member_attribute is a single-value
attribute group name. Allowed values: attribute, filter
ldap_member_scope: sub
Specify search scope for ldap_member_filter.
Allowed values: sub, one, base
ldap_password: <none>
Password for the connection to the LDAP server (SASL and
simple bind). Do not use for anonymous simple binds.
ldap_realm: <none>
SASL realm for LDAP authentication
ldap_referrals: 0
Specify whether or not the client should follow
referrals.
ldap_restart: 1
Specify whether or not LDAP I/O operations are
automatically restarted if they abort prematurely.
ldap_sasl: 1
Use SASL for LDAP binds in the LDAP PTS module.
ldap_sasl_authc: <none>
ldap_sasl_authz: <none>
Deprecated. Use ldap_authz
ldap_sasl_mech: <none>
Deprecated. Use ldap_mech
ldap_sasl_password: <none>
Deprecated. User ldap_password
ldap_sasl_realm: <none>
Deprecated. Use ldap_realm
ldap_scope: sub
Specify search scope.
Allowed values: sub, one, base
ldap_servers: ldap://localhost/
ldap_size_limit: 1
Specify a number of entries for a search request to
return.
ldap_start_tls: 0
Use transport layer security for
ldap:// using
STARTTLS. Do not use
ldaps:// in 'ldap_uri' with this option enabled.
ldap_time_limit: 5s
How long to wait for a search request to complete.
For backward compatibility, if no unit is specified, seconds is
assumed.
ldap_timeout: 5s
How long a search can take before timing out.
For backward compatibility, if no unit is specified, seconds is
assumed.
ldap_ca_dir: <none>
Path to a directory with CA (Certificate Authority)
certificates.
ldap_ca_file: <none>
Path to a file containing CA (Certificate Authority)
certificate(s).
ldap_ciphers: <none>
List of SSL/TLS ciphers to allow. The format of the
string is described in
ciphers(1).
ldap_client_cert: <none>
File containing the client certificate.
ldap_client_key: <none>
File containing the private client key.
ldap_verify_peer: 0
Require and verify server certificate. If this option is
yes, you must specify ldap_ca_file or ldap_ca_dir.
ldap_tls_cacert_dir: <none>
Deprecated in favor of ldap_ca_dir.
ldap_tls_cacert_file: <none>
Deprecated in favor of ldap_ca_file.
ldap_tls_cert: <none>
Deprecated in favor of ldap_client_cert.
ldap_tls_key: <none>
Deprecated in favor of ldap_client_key.
ldap_tls_check_peer: 0
Deprecated in favor of ldap_verify_peer.
ldap_tls_ciphers: <none>
Deprecated in favor of ldap_ciphers.
ldap_uri: <none>
Contains a list of the URLs of all the LDAP servers when
using the LDAP PTS module.
ldap_version: 3
Specify the LDAP protocol version. If ldap_start_tls
and/or ldap_use_sasl are enabled, ldap_version will be automatically set to
3.
literalminus: 0
if enabled, CAPABILITIES will reply with LITERAL- rather
than LITERAL+ (RFC 7888). Doesn't actually size-restrict uploads
though.
lmtp_downcase_rcpt: 1
If enabled, lmtpd will convert the recipient addresses to
lowercase (up to a '+' character, if present).
lmtp_exclude_specialuse: \Snoozed
Don't allow delivery to folders with given special-use
attributes.
Note that "snoozing" of emails can currently only be
done via the JMAP protocol, so delivery directly to the Snoozed mailbox is
prohibited by default as it will not be moved back into INBOX
automatically.
lmtp_fuzzy_mailbox_match: 0
If enabled, and the mailbox specified in the detail part
of the recipient (everything after the '+') does not exist, lmtpd will try to
find the closest match (ignoring case, ignoring whitespace, falling back to
parent) to the specified mailbox name.
lmtp_over_quota_perm_failure: 0
If enabled, lmtpd returns a permanent failure code when a
user's mailbox is over quota. By default, the failure is temporary, causing
the MTA to queue the message and retry later.
lmtp_preparse: 0
If enabled, lmtpd will map in the email and parse the
xapian data for jmapsearch. The advantage is that the parsing is done without
holding any locks. The disadvantage is that the parsing is done even if it
winds up not being needed.
lmtp_strict_quota: 0
If enabled, lmtpd returns a failure code when the
incoming message will cause the user's mailbox to exceed its quota. By
default, the failure won't occur until the mailbox is already over
quota.
lmtp_strict_rfc2821: 1
By default, lmtpd will be strict (per RFC 2821)
with regards to which envelope addresses are allowed. If this option is set to
false, 8bit characters in the local-part of envelope addresses are changed to
'X' instead. This is useful to avoid generating backscatter with certain MTAs
like Postfix or Exim which accept such messages.
lmtpsocket: {configdirectory}/socket/lmtp
Unix domain socket that lmtpd listens on, used by
deliver(8). This should match the path specified in
cyrus.conf(5).
lmtptxn_timeout: 5m
Timeout used during a lmtp transaction to a remote
backend (e.g. in a murder environment). Can be used to prevent hung lmtpds on
proxy hosts when a backend server becomes unresponsive during a lmtp
transaction. The default is 5 minutes - change to zero for infinite.
For backward compatibility, if no unit is specified, seconds is
assumed.
lock_debugtime: <none>
A floating point number of seconds. If set, time how long
we wait for any lock, and syslog the filename and time if it's longer than
this value. The default of NULL means not to time locks.
loginrealms: <empty string>
The list of remote realms whose users may authenticate
using cross-realm authentication identifiers. Separate each realm name by a
space. (A cross-realm identity is considered any identity returned by SASL
with an "@" in it.).
loginuseacl: 0
If enabled, any authentication identity which has
a rights on a user's INBOX may log in as that user.
logtimestamps: 0
Include notations in the protocol telemetry logs
indicating the number of seconds since the last command or response.
mailbox_default_options: 0
Default "options" field for the mailbox on
create. You'll want to know what you're doing before setting this, but it can
apply some default annotations like duplicate suppression.
mailbox_initial_flags: <none>
space-separated list of permanent flags which will be
pre-set in every newly created mailbox. If you know you will require
particular flag names then this avoids a possible race condition against a
client that fills the entire 128 available slots. Default is NULL, which is no
flags. Example: $Label1 $Label2 $Label3 NotSpam Spam
mailbox_legacy_dirs: 0
If enabled, new mailboxes without parents will be created
with legacy paths. sub mailboxes of users will still inherit the parent legacy
setting.
mailbox_maxmessages_addressbook: 0
Limit the number of messages that may exist in a single
mailbox of "addressbook" type. Default (0) means no limit. This
limit applies after quotas are checked, so if you have both quota limits and
this set, then you will be denied if you are either over quota or over this
per-mailbox count.
mailbox_maxmessages_calendar: 0
Limit the number of messages that may exist in a single
mailbox of "calendar" type. Default (0) means no limit. This limit
applies after quotas are checked, so if you have both quota limits and this
set, then you will be denied if you are either over quota or over this
per-mailbox count.
mailbox_maxmessages_email: 0
Limit the number of messages that may exist in a single
mailbox of "email" (normal) type. Default (0) means no limit. This
limit applies after quotas are checked, so if you have both quota limits and
this set, then you will be denied if you are either over quota or over this
per-mailbox count.
mailnotifier: <none>
Notifyd(8) method to use for "MAIL"
notifications. If not set, "MAIL" notifications are disabled.
master_bind_errors_fatal: 0
If enabled, failure to bind a port during startup is
treated as a fatal error, causing master to shut down immediately. The default
is to keep running, with the affected service disabled until the next SIGHUP
causes it to retry.
Note that this only applies during startup. New services that fail
to come up in response to a reconfig+SIGHUP will just be logged and disabled
like the default behaviour, without causing master to exit.
master_pid_file: {configdirectory}/master.pid
The path to a file that master(8) will write its PID to
when running as a daemon.
master_ready_file: {configdirectory}/master.ready
The path to a file that master(8) will update to indicate
that it is ready to accept client connections. This file will be created if it
does not already exist, or truncated if it does.
maxheaderlines: 1000
Maximum number of lines of header that will be processed
into cache records. Default 1000. If set to zero, it is unlimited. If a
message hits the limit, an error will be logged and the rest of the lines in
the header will be skipped. This is to avoid malformed messages causing giant
cache records.
maxlogins_per_host: 0
Maximum number of logged in sessions allowed per host,
zero means no limit.
maxlogins_per_user: 0
Maximum number of logged in sessions allowed per user,
zero means no limit.
maxargssize: 0
Maximum total size of arguments to an IMAP command that
will be accepted by Cyrus. Commands with arguments that exceed this limit will
be rejected.
If set to 0 (the default), a large internally-defined limit will
be applied.
If no unit is specified, bytes is assumed.
maxmessagesize: 0
Maximum size of messages that will be accepted by Cyrus.
This affects LMTP deliveries, IMAP appends, DAV uploads, etc. Messages larger
than this will be rejected.
If set to 0 (the default), a large internally-defined limit will
be applied.
If no unit is specified, bytes is assumed.
maxliteral: 128K
Maximum size of a single literal allowed by the IMAP
parser.
If set to 0, a large internally-defined limit will be applied.
If no unit is specified, bytes is assumed.
Literals used for message [part] data in APPEND are only limited
by the 'maxmessagesize' option.
If the 'literalminus' option is enabled, non-synchonizing literals
will be limited to the lesser of 4K and either 'maxliteral' or
'maxmessagesize', depending on the use-case.
maxquoted: 128K
Maximum size of a single quoted string allowed by the
IMAP parser.
If set to 0, a large internally-defined limit will be applied.
If no unit is specified, bytes is assumed.
maxword: 128K
Maximum size of a single word allowed by the IMAP parser.
If set to 0, a large internally-defined limit will be applied.
If no unit is specified, bytes is assumed.
mboxkey_db: twoskip
The cyrusdb backend to use for mailbox keys.
Allowed values: skiplist, twoskip,
zeroskip
mboxlist_db: twoskip
The cyrusdb backend to use for the mailbox list.
Allowed values: flat, skiplist, sql,
twoskip, zeroskip
mboxlist_db_path: <none>
The absolute path to the mailboxes db file. If not
specified will be configdirectory/mailboxes.db
mboxname_lockpath: <none>
Path to mailbox name lock files (default
$conf/lock)
metapartition_files: <empty string>
Space-separated list of metadata files to be stored on a
metapartition rather than in the mailbox directory on a spool
partition. Allowed values: header, index, cache,
expunge, squat, annotations, lock, dav,
archivecache
metapartition-name: <none>
The pathname of the metadata partition name,
corresponding to spool partition partition-name. For any mailbox
residing in a directory on partition-name, the metadata files listed in
metapartition_files will be stored in a corresponding directory on
metapartition-name. Note that not every partition-name option is
required to have a corresponding metapartition-name option, so that you
can selectively choose which spool partitions will have separate metadata
partitions.
mupdate_authname: <none>
The SASL username (Authentication Name) to use when
authenticating to the mupdate server (if needed).
mupdate_config: standard
The configuration of the mupdate servers in the Cyrus
Murder. The "standard" config is one in which there are discreet
frontend (proxy) and backend servers. The "unified" config is one in
which a server can be both a frontend and backend. The "replicated"
config is one in which multiple backend servers all share the same mailspool,
but each have their own "replicated" copy of mailboxes.db. Allowed
values: standard, unified, replicated
munge8bit: 1
If enabled, lmtpd munges messages with 8-bit characters
in the headers. The 8-bit characters are changed to `X'. If reject8bit
is enabled, setting munge8bit has no effect. (A proper solution to
non-ASCII characters in headers is offered by RFC 2047 and its
predecessors.)
mupdate_connections_max: 128
The max number of connections that a mupdate process will
allow, this is related to the number of file descriptors in the mupdate
process. Beyond this number connections will be immediately issued a BYE
response.
mupdate_password: <none>
The SASL password (if needed) to use when authenticating
to the mupdate server.
mupdate_port: 3905
The port of the mupdate server for the Cyrus
Murder.
mupdate_realm: <none>
The SASL realm (if needed) to use when authenticating to
the mupdate server.
mupdate_retry_delay: 20
The base time to wait between connection retries to the
mupdate server.
mupdate_server: <none>
The mupdate server for the Cyrus Murder.
mupdate_username: <empty string>
The SASL username (Authorization Name) to use when
authenticating to the mupdate server.
mupdate_workers_max: 50
The maximum number of mupdate worker threads
(overall).
mupdate_workers_maxspare: 10
The maximum number of idle mupdate worker threads.
mupdate_workers_minspare: 2
The minimum number of idle mupdate worker threads.
mupdate_workers_start: 5
The number of mupdate worker threads to start.
netscapeurl: <none>
If enabled at compile time, this specifies a URL to reply
when Netscape asks the server where the mail administration HTTP server is.
Administrators should set this to a local resource.
newsaddheaders: to
Space-separated list of headers to be added to incoming
usenet articles. Added
To: headers will contain email delivery
addresses corresponding to each newsgroup in the
Newsgroups: header.
Added
Reply-To: headers will contain email delivery addresses
corresponding to each newsgroup in the
Followup-To: or
Newsgroups: header. If the specified header(s) already exist in an
article, the email delivery addresses will be appended to the original header
body(s).
This option applies if and only if the newspostuser option
is set. Allowed values: to, replyto
newsgroups: *
A wildmat pattern specifying which mailbox hierarchies
should be treated as newsgroups. Only mailboxes matching the wildmat will
accept and/or serve articles via NNTP. If not set, a default wildmat of
"*" (ALL shared mailboxes) will be used. If the newsprefix
option is also set, the default wildmat will be translated to
"<newsprefix>.*"
newsmaster: news
Userid that is used for checking access controls when
executing Usenet control messages. For instance, to allow articles to be
automatically deleted by cancel messages, give the "news" user the
'd' right on the desired mailboxes. To allow newsgroups to be automatically
created, deleted and renamed by the corresponding control messages, give the
"news" user the 'c' right on the desired mailbox hierarchies.
newspeer: <none>
A list of whitespace-separated news server specifications
to which articles should be fed. Each server specification is a string of the
form [user[:pass]@]host[:port][/wildmat] where 'host' is the fully qualified
hostname of the server, 'port' is the port on which the server is listening,
'user' and 'pass' are the authentication credentials and 'wildmat' is a
pattern that specifies which groups should be fed. If no 'port' is specified,
port 119 is used. If no 'wildmat' is specified, all groups are fed. If 'user'
is specified (even if empty), then the NNTP POST command will be used to feed
the article to the server, otherwise the IHAVE command will be used.
A '@' may be used in place of '!' in the wildmat to prevent
feeding articles cross-posted to the given group, otherwise cross-posted
articles are fed if any part of the wildmat matches. For example, the string
"peer.example.com:*,!control.*,@local.*" would feed all groups
except control messages and local groups to peer.example.com. In the case of
cross-posting to local groups, these articles would not be fed.
newspostuser: <none>
Userid used to deliver usenet articles to newsgroup
folders (usually via lmtp2nntp). For example, if set to "post",
email sent to "post+comp.mail.imap" would be delivered to the
"comp.mail.imap" folder.
When set, the Cyrus NNTP server will add the header(s) specified
in the newsaddheaders option to each incoming usenet article. The
added header(s) will contain email delivery addresses corresponding to each
relevant newsgroup. If not set, no headers are added to usenet articles.
newsprefix: <none>
Prefix to be prepended to newsgroup names to make the
corresponding IMAP mailbox names.
newsrc_db_path: <none>
The absolute path to the newsrc db file. If not
specified, will be configdirectory/fetchnews.db
nntptimeout: 3m
Set the length of the NNTP server's inactivity autologout
timer. The minimum value is 3 minutes, also the default.
For backward compatibility, if no unit is specified, minutes is
assumed.
notesmailbox: <none>
The top level mailbox in each user's account which is
used to store * Apple-style Notes. Default is blank (disabled).
notifysocket: {configdirectory}/socket/notify
Unix domain socket that the mail notification daemon
listens on.
notify_external: <none>
Path to the external program that notifyd(8) will call to
send mail notifications.
The external program will be called with the following command
line options:
And the notification message will be available on
stdin.
partition-name: <none>
The pathname of the partition name. At least one
partition pathname MUST be specified. If the defaultpartition option is
used, then its pathname MUST be specified. For example, if the value of the
defaultpartion option is part1, then the partition-part1
field is required.
partition_select_mode: freespace-most
Partition selection mode.
- random
- (pseudo-)random selection
- freespace-most
- partition with the most free space (KiB)
- freespace-percent-most
- partition with the most free space (%)
- freespace-percent-weighted
- each partition is weighted according to its free space (%); the more free
space the partition has, the more chances it has to be selected
- freespace-percent-weighted-delta
- each partition is weighted according to its difference of free space (%)
compared to the most used partition; the more the partition is lagging
behind the most used partition, the more chances it has to be selected
Note that actually even the most used partition has a few
chances to be selected, and those chances increase when other partitions
get closer
Allowed values: random, freespace-most,
freespace-percent-most, freespace-percent-weighted,
freespace-percent-weighted-delta
partition_select_exclude: <none>
List of partitions to exclude from selection mode.
partition_select_usage_reinit: 0
For a given session, number of operations (e.g.
partition selection) for which partitions usage data are cached.
partition_select_soft_usage_limit: 0
Limit of partition usage (%): if a partition is over that
limit, it is automatically excluded from selection mode.
If all partitions are over that limit, this feature is not used
anymore.
plaintextloginpause: <none>
Time to pause after a successful plaintext login. For
systems that support strong authentication, this permits users to perceive a
cost of using plaintext passwords. (This does not affect the use of PLAIN in
SASL authentications.)
For backward compatibility, if no unit is specified, seconds is
assumed.
plaintextloginalert: <none>
Message to send to client after a successful plaintext
login.
popexpiretime: -1
The duration advertised as being the minimum a message
may be left on the POP server before it is deleted (via the CAPA command,
defined in the POP3 Extension Mechanism, which some clients may support). This
duration has a granularity of whole days, with partial days truncated (so e.g.
"45m" is effectively "0d"). "NEVER", the
default, may be specified with a negative number.
The Cyrus POP3 server never deletes mail, no matter what the value
of this parameter is. However, if a site implements a less liberal policy,
it needs to change this parameter accordingly.
For backward compatibility, if no unit is specified, days is
assumed.
popminpoll: <none>
Set the minimum amount of time the server forces users to
wait between successive POP logins.
For backward compatibility, if no unit is specified, minutes is
assumed.
popsubfolders: 0
Allow access to subfolders of INBOX via POP3 by using
userid+subfolder syntax as the authentication/authorization id.
poppollpadding: 1
Create a softer minimum poll restriction. Allows
poppollpadding connections before the minpoll restriction is triggered.
Additionally, one padding entry is recovered every
popminpoll minutes.
This allows for the occasional polling rate faster than popminpoll, (i.e., for
clients that require a send/receive to send mail) but still enforces the rate
long-term. Default is 1 (disabled).
The easiest way to think of it is a queue of past connections,
with one slot being filled for every connection, and one slot being cleared
every popminpoll minutes. When the queue is full, the user will not
be able to check mail again until a slot is cleared. If the user waits a
sufficient amount of time, they will get back many or all of the slots.
poptimeout: 10m
Set the length of the POP server's inactivity autologout
timer. The minimum value is 10 minutes, the default.
For backward compatibility, if no unit is specified, minutes is
assumed.
popuseacl: 0
Enforce IMAP ACLs in the pop server. Due to the nature of
the POP3 protocol, the only rights which are used by the pop server are 'r',
't', and 's' for the owner of the mailbox. The 'r' right allows the user to
open the mailbox and list/retrieve messages. The 't' right allows the user to
delete messages. The 's' right allows messages retrieved by the user to have
the \Seen flag set (only if popuseimapflags is also enabled).
popuseimapflags: 0
If enabled, the pop server will set and obey IMAP flags.
Messages having the \Deleted flag are ignored as if they do not exist.
Messages that are retrieved by the client will have the \Seen flag set. All
messages will have the \Recent flag unset.
postmaster: postmaster
Username that is used as the 'From' address in rejection
MDNs produced by sieve.
postuser: <empty string>
Userid used to deliver messages to shared folders. For
example, if set to "bb", email sent to "bb+shared.blah"
would be delivered to the "shared.blah" folder. By default, an email
address of "+shared.blah" would be used.
proc_path: <none>
Path to proc directory. Default is NULL - must be an
absolute path if specified. If not specified, the path $configdirectory/proc/
will be used.
prometheus_enabled: 0
Whether tracking of service metrics for Prometheus is
enabled.
prometheus_need_auth: admin
Authentication level required to fetch Prometheus
metrics.
Allowed values: none, user, admin
prometheus_update_freq: 10s
Frequency in at which promstatsd should re-collate its
statistics report. The minimum value is 1 second, the default is 10 seconds.
For backward compatibility, if no unit is specified, seconds is
assumed.
prometheus_stats_dir: <none>
Directory to use for gathering prometheus statistics. If
specified, must be an absolute path. If not specified, the default path
$configdirectory/stats/ will be used. It may be advantageous to locate this
directory on ephemeral storage.
proxy_authname: proxy
The authentication name to use when authenticating to a
backend server in the Cyrus Murder.
proxy_compress: 0
Try to enable protocol-specific compression when
performing a client connection to a backend server in the Cyrus Murder.
Note that this should only be necessary over slow network
connections. Also note that currently only IMAP and MUPDATE support
compression.
proxy_password: <none>
The default password to use when authenticating to a
backend server in the Cyrus Murder. May be overridden on a host-specific basis
using the hostname_password option.
proxy_realm: <none>
The authentication realm to use when authenticating to a
backend server in the Cyrus Murder
proxyd_allow_status_referral: 0
Set to true to allow proxyd to issue referrals to clients
that support it when answering the STATUS command. This is disabled by default
since some clients issue many STATUS commands in a row, and do not cache the
connections that these referrals would cause, thus resulting in a higher
authentication load on the respective backend server.
proxyd_disable_mailbox_referrals: 0
Set to true to disable the use of mailbox-referrals on
the proxy servers.
proxyservers: <none>
A list of users and groups that are allowed to proxy for
other users, separated by spaces. Any user listed in this will be allowed to
login for any other user: use with caution. In a standard murder this option
should ONLY be set on backends. DO NOT SET on frontends or things won't work
properly.
pts_module: afskrb
The PTS module to use.
Allowed values: afskrb, ldap, http
ptloader_sock: <none>
Unix domain socket that ptloader listens on. (defaults to
configdirectory/ptclient/ptsock).
ptscache_db: twoskip
The cyrusdb backend to use for the pts cache.
Allowed values: skiplist, twoskip,
zeroskip
ptscache_db_path: <none>
The absolute path to the ptscache db file. If not
specified, will be configdirectory/ptscache.db
ptscache_timeout: 3h
The timeout for the PTS cache database when using the
auth_krb_pts authorization method (default: 3 hours).
For backward compatibility, if no unit is specified, seconds is
assumed.
ptskrb5_convert524: 1
When using the AFSKRB ptloader module with Kerberos 5
canonicalization, do the final 524 conversion to get a n AFS style name (using
'.' instead of '/', and using short names.
ptskrb5_strip_default_realm: 1
When using the AFSKRB ptloader module with Kerberos 5
canonicalization, strip the default realm from the userid (this does not
affect the stripping of realms specified by the afspts_localrealms
option).
qosmarking: cs0
This specifies the Class Selector or Differentiated
Services Code Point designation on IP headers (in the ToS field). Allowed
values: cs0, cs1, cs2, cs3, cs4,
cs5, cs6, cs7, af11, af12, af13,
af21, af22, af23, af31, af32, af33,
af41, af42, af43, ef
quota_db: quotalegacy
The cyrusdb backend to use for quotas.
Allowed values: flat, skiplist, sql,
quotalegacy, twoskip, zeroskip
quota_db_path: <none>
The absolute path for the quota database (if you choose a
single-file quota DB type - or the base path if you choose quotalegacy). If
not specified will be configdirectory/quotas.db or
configdirectory/quota/
quota_use_conversations: 0
If conversations it enabled and quotaroot is a user
folder, use the conversations quota counts, which count multiple copies of
exactly the same message (by GUID) as only one.
quotawarn: 90
Deprecated in favour of quotawarnpercent.
quotawarnpercent: 90
The percent of quota utilization over which the server
generates warnings.
quotawarnkb: <none>
Deprecated in favour of quotawarnsize.
quotawarnsize: 0
The maximum amount of free space at which to give a quota
warning (if this value is 0, or if the quota is smaller than this amount, then
warnings are always given).
Note that quota has kibibyte granularity. Values specified here
will be truncated to the nearest whole kibibyte.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
quotawarnmsg: 0
The maximum amount of messages at which to give a quota
warning (if this value is 0, or if the quota is smaller than this amount, then
warnings are always given).
readonly: 0
If enabled, all IMAP, POP and JMAP connections are
read-only, * no writes allowed.
reject8bit: 0
If enabled, lmtpd rejects messages with 8-bit characters
in the headers.
restore_authname: <none>
The authentication used by the restore tool when
authenticating to an IMAP/sync server.
restore_password: <none>
The password used by the restore tool when authenticating
to an IMAP/sync server.
restore_realm: <none>
The authentication realm used by the restore tool when
authenticating to an IMAP/sync server.
reverseacls: 0
At startup time, ctl_cyrusdb -r will check this value and
it will either add or remove reverse ACL pointers from mailboxes.db
reverseuniqueids: 1
Deprecated. No longer used.
rfc2046_strict: 0
If enabled, imapd will be strict (per RFC 2046)
when matching MIME boundary strings. This means that boundaries containing
other boundaries as substrings will be treated as identical. Since enabling
this option will break some messages created by Eudora 5.1 (and earlier), it
is recommended that it be left disabled unless there is good reason to do
otherwise.
rfc2047_utf8: 0
If enabled, imapd will parse any non-encoded character
sequence in MIME header values as UTF8. This is useful for installations that
either advertise the UTF8SMTP (RFC 5335) extension or receive mails
with improperly escaped UTF-8 byte sequences. It is recommended that this
option is left disabled unless there is good reason to do otherwise.
rfc3028_strict: 1
If enabled, Sieve will be strict (per RFC 3028)
with regards to which headers are allowed to be used in address and envelope
tests. This means that only those headers which are defined to contain
addresses will be allowed in address tests and only "to" and
"from" will be allowed in envelope tests. When disabled, ANY
grammatically correct header will be allowed.
rss_feedlist_template: <none>
File containing HTML that will be used as a template for
displaying the list of available RSS feeds. A single instance of the variable
%RSS_FEEDLIST% should appear in the file, which will be replaced by a nested
unordered list of feeds. The toplevel unordered list will be tagged with an id
of "feed" (<ul id='feed'>) which can be used by stylesheet(s)
in your template. The dynamically created list of feeds based on the HTML
template will be accessible at the "/rss" URL on the server.
rss_feeds: *
A wildmat pattern specifying which mailbox hierarchies
should be treated as RSS feeds. Only mailboxes matching the wildmat will have
their messages available via RSS. If not set, a default wildmat of
"*" (ALL mailboxes) will be used.
rss_maxage: <none>
Maximum age of items to display in an RSS channel. If
non-zero, httpd will only display items received within this time period. If
set to 0, all available items will be displayed (the default).
For backward compatibility, if no unit is specified, days is
assumed.
rss_maxitems: 0
Maximum number of items to display in an RSS channel. If
non-zero, httpd will display no more than the rss_maxitems most recent
items. If set to 0, all available items will be displayed (the default).
rss_maxsynopsis: 0
Maximum RSS item synopsis length. If non-zero, httpd will
display no more than the first rss_maxsynopsis characters of an item's
synopsis. If set to 0, the entire synopsis will be displayed (the
default).
rss_realm: <none>
The realm to present for HTTP authentication of RSS
feeds. If not set (the default), the value of the "servername"
option will be used.
sasl_auto_transition: 0
If enabled, the SASL library will automatically create
authentication secrets when given a plaintext password. See the SASL
documentation.
sasl_maximum_layer: 256
Maximum SSF (security strength factor) that the server
will allow a client to negotiate.
sasl_minimum_layer: 0
The minimum SSF that the server will allow a client to
negotiate. A value of 1 requires integrity protection; any higher value
requires some amount of encryption.
sasl_option: 0
Any SASL option can be set by preceding it with
sasl_. This file overrides the SASL configuration file.
sasl_pwcheck_method: <none>
The mechanism used by the server to verify plaintext
passwords. Possible values include "auxprop", "saslauthd",
and "pwcheck".
search_batchsize: 20
The number of messages to be indexed in one batch
(default 20). Note that long batches may delay user commands or mail
delivery.
search_attachment_extractor_url: <none>
A HTTP or HTTPS URL to extract search text from rich text
attachments and other media during search indexing. The server at this URL
must implement the following protocol:
1. For each attachment of an email, Cyrus sends a GET request to
the URL <extractor-url>/<cyrus-id>, where <extractor-url>
is the configured URL and <cyrus-id> is a Cyrus-chosen path segment
that uniquely identifies this attachment.
2. If the extractor already has a cached plain text extract of the
attachment identified by <cyrus-id> then it may return HTTP status
code 200 (OK) and the plain text extract with a Content-Type
"text/plain" header. Otherwise it must return HTTP status 404 (Not
Found).
3. If Cyrus receives the HTTP status code 404 (Not Found), then it
sends a PUT request to the same URL as previously. The PUT request body
contains the decoded, binary body of the attachment. The Content-Type
request header has the same value as declared in the MIME part headers,
including any type parameters.
4. The extractor must return the plain text extract with either
HTTP status 200 (OK) or 201 (Created) and a Content-Type
"text/plain" header. If no text can be extracted, then the
extractor may return any return code in the range 4xx, or 200 and an empty
response body.
Any other HTTP status code is treated as an error. For performance
reasons, the Cyrus indexer attempts to keep-alive the TCP connection to the
extractor. Xapian only.
search_attachment_extractor_request_timeout: 5m
Defines the duration after which to cancel non-responding
requests to the search attachment extractor service.
If no unit is specified, seconds is assumed.
search_attachment_extractor_idle_timeout: 5m
Defines the duration after which to close unused
connections to the search attachment extractor service. If the idle timeout is
less than search_attachment_extractor_request_timeout, then it is ignored and
request timeout used instead.
If no unit is specified, seconds is assumed.
search_index_language: 0
If enabled, then messages bodies are stemmed by detected
language in addition to the default English stemmer. Xapian only.
search_index_parts: 0
Deprecated. No longer used.
search_index_skip_domains: <none>
A space separated list of domains - if set, any users in
the listed domains will be skipped when indexing.
search_index_skip_users: <none>
A space separated list of usernames - if set, any users
in the list will be skipped when indexing.
search_query_language: 0
Deprecated. No longer used.
search_normalisation_max: 1000
A resource bound for the combinatorial explosion of
search expression tree complexity caused by normalising expressions with many
OR nodes. These can use more CPU time to optimise than they save IO time in
scanning folders.
search_engine: none
The indexing engine used to speed up searching.
Allowed values: none, squat, xapian
search_fuzzy_always: 0
Whether to enable RFC 6203 FUZZY search for all
IMAP SEARCH. If turned on, search attributes will be searched using FUZZY
search by default. If turned off, clients have to explicitly use the FUZZY
search key to enable fuzzy search for regular SEARCH commands.
search_index_headers: 1
Whether to index headers other than From, To, Cc, Bcc,
and Subject. Experiment shows that some headers such as Received and
DKIM-Signature can contribute up to 2/3rds of the index size but almost
nothing to the utility of searching. Note that if header indexing is disabled,
headers can still be searched, the searches will just be slower.
search_indexed_db: twoskip
The cyrusdb backend to use for the search latest indexed
uid state. Xapian only.
Allowed values: flat, skiplist, twoskip,
zeroskip
search_maxtime: <none>
The maximum number of seconds to run a search for before
aborting. Default of no value means search "forever" until other
timeouts.
search_maxsize: 4M
The maximum size to index for each message part. Message
contents that occur after this byte offset will not be indexed nor used to
generate search snippets. Xapian-only.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
search_queryscan: 5000
The minimum number of records require to do a direct scan
of all G keys * rather than indexed lookups. A value of 0 means always do
indexed lookups.
search_skipdiacrit: 1
When searching, should diacriticals be stripped from the
search terms. The default is "true", a search for "hav"
will match "Håvard". This is not RFC 5051 compliant,
but it backwards compatible, and may be preferred by some sites.
search_skiphtml: 0
If enabled, HTML parts of messages are skipped, i.e. not
indexed and not searchable. Otherwise, they're indexed.
search_whitespace: merge
When searching, how whitespace should be handled. Options
are: "skip" (default in 2.3 and earlier series) - where a search for
"equi" would match "the quick brown fox".
"merge" - the default, where "he qu" would match "the
quick brownfox", and "keep", where whitespace must match
exactly. The default of "merge" is recommended for most cases - it's
a good compromise which keeps words separate. Allowed values: skip,
merge, keep
search_snippet_length: 255
The maximum byte length of a snippet generated by the
XSNIPPETS command. Only supported by the Xapian search backend, which attempts
to always fill search_snippet_length bytes in the generated snippet.
search_stopword_path: <none>
The absolute base path to the search stopword lists. If
not specified, no stopwords will be taken into account during search indexing.
Currently, the only supported and default stop word file is english.txt.
searchpartition-name: <none>
The pathname where to store the xapian search indexes of
searchtier for mailboxes of partition
name. This must be
configured for the
defaultsearchtier and any additional search tier
(see squatter for details).
For example: if defaultpartition is defined as part1 and
defaultsearchtier as tier1 then the configuration must contain an
entry tier1searchpartition-part1 that defines the path where to store
this tier1's search index for the part1 partition.
This option MUST be specified for xapian search.
seenstate_db: twoskip
The cyrusdb backend to use for the seen state.
Allowed values: flat, skiplist, twoskip,
zeroskip
sendmail: /usr/lib/sendmail
The pathname of the sendmail executable. Sieve invokes
sendmail for sending rejections, redirects and vacation responses.
sendmail_auth_id: CYRUS_SENDMAIL_AUTH_ID
The name of an environment variable to set when invoking
sendmail. The value of this environment variable will contain the user id of
the currently authenticated user. If no user is authenticated the environment
variable is not set.
serverlist: <none>
Whitespace separated list of backend server names. Used
for finding server with the most available free space for proxying
CREATE.
serverlist_select_mode: freespace-most
Server selection mode.
- random
- (pseudo-)random selection
- freespace-most
- backend with the most (total) free space (KiB)
- freespace-percent-most
- backend whose partition has the most free space (%)
- freespace-percent-weighted
- same as for partition selection, comparing the free space (%) of the least
used partition of each backend
- freespace-percent-weighted-delta
- same as for partition selection, comparing the free space (%) of the least
used partition of each backend.
Allowed values: random, freespace-most,
freespace-percent-most, freespace-percent-weighted,
freespace-percent-weighted-delta
serverlist_select_usage_reinit: 0
For a given session, number of operations (e.g.
backend selection) for which backend usage data are cached.
serverlist_select_soft_usage_limit: 0
Limit of backend usage (%): if a backend is over that
limit, it is automatically excluded from selection mode.
If all backends are over that limit, this feature is not used
anymore.
servername: <none>
This is the hostname visible in the greeting messages of
the POP, IMAP and LMTP daemons. If it is unset, then the result returned from
gethostname(2) is used. This is also the value used by murder clusters to
identify the host name. It should be resolvable by DNS to the correct host,
and unique within an active cluster. If you are using low level replication
(e.g. drbd) then it should be the same on each copy and the DNS name should
also be moved to the new master on failover.
serverinfo: on
The server information to display in the greeting and
capability responses. Information is displayed as follows:
"off" = no server information in the greeting
or capabilities
"min" = servername in the greeting; no server
information in the capabilities
"on" = servername and product version in the
greeting; product version in the capabilities
Allowed values: off, min, on
sharedprefix: Shared Folders
If using the alternate IMAP namespace, the prefix for the
shared namespace. The hierarchy delimiter will be automatically
appended.
sieve_allowreferrals: 1
If enabled, timsieved will issue referrals to clients
when the user's scripts reside on a remote server (in a Murder). Otherwise,
timsieved will proxy traffic to the remote server.
sieve_duplicate_max_expiration: 90d
Maximum expiration time for duplicate message tracking
records.
For backward compatibility, if no unit is specified, seconds is
assumed.
sieve_extensions: fileinto reject vacation vacation-seconds
notify include envelope environment body relational regex subaddress copy
date index imap4flags mailbox mboxmetadata servermetadata variables
editheader extlists duplicate ihave fcc special-use redirect-dsn
redirect-deliverby mailboxid vnd.cyrus.log vnd.cyrus.jmapquery
vnd.cyrus.imip snooze vnd.cyrus.implicit_keep_target
Space-separated list of Sieve extensions allowed to be
used in sieve scripts, enforced at submission by timsieved(8). Any previously
installed script will be unaffected by this option and will continue to
execute regardless of the extensions used. This option has no effect on
options that are disabled at compile time (e.g., "regex"). Allowed
values: fileinto, reject, vacation,
vacation-seconds, notify, include, envelope,
environment, body, relational, regex,
subaddress, copy, date, index,
imap4flags=imapflags, mailbox, mboxmetadata,
servermetadata, variables, editheader, extlists,
duplicate, ihave, fcc, special-use,
redirect-dsn, redirect-deliverby, mailboxid,
vnd.cyrus.log=x-cyrus-log,
vnd.cyrus.jmapquery=x-cyrus-jmapquery, vnd.cyrus.imip,
snooze=vnd.cyrus.snooze=x-cyrus-snooze,
vnd.cyrus.implicit_keep_target
sieve_folder: #sieve
The name of the folder for storing Sieve scripts
(#sieve)
sieve_maxscriptsize: 32K
Maximum size any sieve script can be, enforced at
submission by timsieved(8) and JMAP.
For backward compatibility, if no unit is specified, kibibytes is
assumed.
sieve_maxscripts: 5
Maximum number of sieve scripts any user may have,
enforced at submission by timsieved(8).
sieve_utf8fileinto: 0
If enabled, the sieve engine expects folder names for the
fileinto action in scripts to use UTF8 encoding. Otherwise, modified
UTF7 encoding should be used.
sieve_sasl_send_unsolicited_capability: 0
If enabled, timsieved will emit a capability response
after a successful SASL authentication, per draft-martin-managesieve-12.txt
.
sieve_use_lmtp_reject: 1
Enabled by default. If reject can be done via LMTP, then
return a 550 rather than generating the bounce message in Cyrus.
sieve_vacation_min_response: 3d
Minimum time interval between consecutive vacation
responses, per draft-ietf-vacation-seconds.txt. The default is 3 days.
For backward compatibility, if no unit is specified, seconds is
assumed.
sieve_vacation_max_response: 90d
Maximum time interval between consecutive vacation
responses, per draft-ietf-vacation-seconds.txt. The default is 90 days. The
minimum is 7 days.
For backward compatibility, if no unit is specified, seconds is
assumed.
sievedir: /usr/sieve
If sieveusehomedir is false, this directory is searched
for Sieve scripts.
sievenotifier: <none>
Notifyd(8) method to use for "SIEVE"
notifications. If not set, "SIEVE" notifications are disabled.
This method is only used when no method is specified in the
script.
sieveusehomedir: 0
If enabled, lmtpd will look for Sieve scripts in user's
home directories: ~user/.sieve.
anysievefolder: 0
It must be "yes" in order to permit the
autocreation of any INBOX subfolder requested by a sieve filter, through the
"fileinto" action. (default = no)
singleinstancestore: 1
If enabled, imapd, lmtpd and nntpd attempt to only write
one copy of a message per partition and create hard links, resulting in a
potentially large disk savings.
skiplist_always_checkpoint: 1
If enabled, this option forces the skiplist cyrusdb
backend to always checkpoint when doing a recovery. This causes slightly more
IO, but on the other hand leads to more efficient databases, and the entire
file is already "hot".
skiplist_unsafe: 0
If enabled, this option forces the skiplist cyrusdb
backend to not sync writes to the disk. Enabling this option is NOT
RECOMMENDED.
smtp_backend: sendmail
The SMTP backend to use for sending email.
The "host" backend sends message submissions via a TCP
socket to the SMTP host defined in the config option smtp_host.
The "sendmail" backend forks the Cyrus process into the
executable defined in the config option sendmail. The executable must accept
"-bs" as command line argument, read from stdin and must implement
the minimum SMTP protocol as defined in section 4.5.1 of RFC
5321.
If the SMTP EHLO command reports AUTH (RFC 4954) as a
supported extension, then the MAIL FROM command includes the AUTH parameter,
with its value set to the name of any authenticated user which triggered the
email. The AUTH parameter is omitted if the user is unknown to the calling
process.
If the directory
configdirectory/log/smtpclient.smtp_backend exists, then
telemetry logs for outgoing SMTP sessions will be created in this
directory.
Allowed values: host, sendmail
smtp_host: localhost:587
The SMTP host to use for sending mail (also see the
smtp_backend option). The value of this option must the name or IP address of
a TCP host, followed optionally by a colon and the port or service to use. The
default port is 587. TLS may be activated by appending "/tls" to the
value. Authentication is enabled if smtp_auth_authname is set. Authentication
can be explicitly disabled by appending "/noauth" to the host
address.
smtp_auth_authname: <none>
The authentication name to use when authenticating to the
SMTP server defined in smtp_host.
smtp_auth_password: <none>
The password to use when authenticating to the SMTP
server defined in smtp_host.
smtp_auth_realm: <none>
The authentication SASL realm to use when authenticating
to a SMTP server.
soft_noauth: 1
If enabled, lmtpd returns temporary failures if the
client does not successfully authenticate. Otherwise lmtpd returns permanent
failures (causing the mail to bounce immediately).
sortcache_db: twoskip
The cyrusdb backend to use for caching sort results
(currently only used for xconvmultisort). Allowed values: skiplist,
twoskip, zeroskip
specialuse_extra: <none>
Whitespace separated list of extra special-use attributes
that can be set on a mailbox. RFC 6154 currently lists what special-use
attributes can be set. This allows extending that list in the future or adding
your own if needed.
specialuse_nochildren: \Scheduled \Snooze
Whitespace separated list of special-use attributes that
may not contain child folders. If set, mailboxes with any of these attributes
may not have child folders created, and these attributes cannot be added to
mailboxes that already have children.
specialuse_protect: \Archive \Drafts \Important \Junk \Sent
\Scheduled \Snooze \Trash
Whitespace separated list of special-use attributes to
protect the mailboxes for. If set, don't allow mailboxes with these special
use attributes to be deleted or renamed to have a different parent. Default is
the built-in list
specialusealways: 1
If enabled, this option causes LIST and LSUB output to
always include the XLIST "special-use" flags.
sql_database: <none>
Name of the database which contains the cyrusdb
table(s).
sql_engine: <none>
Name of the SQL engine to use.
Allowed values: mysql, pgsql, sqlite
sql_hostnames: <empty string>
Comma separated list of SQL servers (in host[:port]
format).
sql_passwd: <none>
Password to use for authentication to the SQL
server.
sql_user: <none>
Username to use for authentication to the SQL
server.
sql_usessl: 0
If enabled, a secure connection will be made to the SQL
server.
srs_alwaysrewrite: 0
If true, perform SRS rewriting for ALL forwarding, even
when not required.
srs_domain: <none>
The domain to use in rewritten addresses. This must point
only to machines which know the encoding secret used by this system. When
present, SRS is enabled.
srs_hashlength: 0
The hash length to generate in a rewritten address.
srs_secrets: <none>
A list of secrets with which to generate addresses.
srs_separator: <none>
The separator to appear immediately after SRS[01] in
rewritten addresses.
srvtab: <empty string>
The pathname of srvtab file containing the
server's private key. This option is passed to the SASL library and overrides
its default setting.
submitservers: <none>
A list of users and groups that are allowed to resolve
"urlauth=submit+" IMAP URLs, separated by spaces. Any user listed in
this will be allowed to fetch the contents of any valid
"urlauth=submit+" IMAP URL: use with caution.
subscription_db: flat
The cyrusdb backend to use for the subscriptions list.
Allowed values: flat, skiplist, twoskip,
zeroskip
suppress_capabilities: <none>
Suppress the named capabilities from any capability
response. Use the exact case as it appears in the response, e.g.
"suppress_capabilities: ESEARCH QRESYNC WITHIN XLIST LIST-EXTENDED"
if you have a murder with 2.3.x backends and don't want clients being confused
by new capabilities that some backends don't support.
statuscache: 0
Enable/disable the imap status cache.
statuscache_db: twoskip
The cyrusdb backend to use for the imap status cache.
Allowed values: skiplist, sql, twoskip,
zeroskip
statuscache_db_path: <none>
The absolute path to the statuscache db file. If not
specified, will be configdirectory/statuscache.db
sync_authname: <none>
The authentication name to use when authenticating to a
sync server. Prefix with a channel name to only apply for that channel.
sync_batchsize: 8192
the number of messages to upload in a single mailbox
replication. Default is 8192. If there are more than this many messages
appended to the mailbox, generate a synthetic partial state and send
that.
sync_cache_db: twoskip
The cyrusdb backend to use for the replication cache.
Allowed values: skiplist, sql, twoskip,
zeroskip
sync_cache_db_path: <none>
The path for the replication cache. Prefix with a channel
name to apply for that channel. NOTE, it's quite important to have a different
one per backend!
sync_host: <none>
Name of the host (replica running sync_server(8)) to
which replication actions will be sent by sync_client(8). Prefix with a
channel name to only apply for that channel.
sync_log: 0
Enable replication action logging by lmtpd(8), imapd(8),
pop3d(8), and nntpd(8). The log {configdirectory}/sync/log is used by
sync_client(8) for "rolling" replication.
sync_log_chain: 0
Enable replication action logging by sync_server as well,
allowing chaining of replicas. Use this on 'B' for A => B => C
replication layout.
sync_log_channels: <none>
If specified, log all events to multiple log files in
directories specified by each "channel". Each channel can then be
processed separately, such as by multiple sync_client(8)s in a mesh
replication scheme, or by squatter(8) for rolling search index updates.
You can use "" (the two-character string U+22 U+22) to
mean the default sync channel.
sync_log_unsuppressable_channels: squatter
If specified, the named channels are exempt from the
effect of setting sync_log_chain:off, i.e. they are always logged to by the
sync_server process. This is only really useful to allow rolling search
indexing on a replica.
sync_password: <none>
The default password to use when authenticating to a sync
server. Prefix with a channel name to only apply for that channel.
sync_port: <none>
Name of the service (or port number) of the replication
service on replica host. Prefix with a channel name to only apply for that
channel. If not specified, and if sync_try_imap is set to "yes" (the
default), then the replication client will first try "imap" (port
143) to check if imapd supports replication. Otherwise it will default to
"csync" (usually port 2005).
sync_realm: <none>
The authentication realm to use when authenticating to a
sync server. Prefix with a channel name to only apply for that channel.
sync_reconnect_maxwait: 20m
When sync_client cannot connect to the replica, it enters
a retry loop with an exponential backoff between attempts. This option sets
the upper limit on that exponential backoff: no matter how long the replica
has been down so far, sync_client will never wait longer than
sync_reconnect_maxwait between retries.
If this is zero or negative, the backoff duration will be allowed
to increase indefinitely (not recommended).
If no unit is specified, seconds is assumed.
sync_repeat_interval: 1s
Minimum interval between replication runs in rolling
replication mode. If a replication run takes longer than this time, we repeat
immediately. Prefix with a channel name to only apply for that channel.
For backward compatibility, if no unit is specified, seconds is
assumed.
sync_rightnow_channel: <none>
if set, run sync_client to this channel immediately. As
with channels, set this value to '""' to sync the default
channel!
sync_shutdown_file: <none>
Simple latch used to tell sync_client(8) that it should
shut down at the next opportunity. Safer than sending signals to running
processes. Prefix with a channel name to only apply for that channel.
sync_timeout: 30m
How long to wait for a response before returning a
timeout failure when talking to a replication peer (client or server). The
minimum duration is 3 seconds, the default is 30 minutes.
For backward compatibility, if no unit is specified, seconds is
assumed.
sync_try_imap: 1
Whether sync_client should try to perform an IMAP
connection before falling back to csync. If this is set to "no",
sync_client will only use csync. Prefix with a channel name to apply only for
that channel.
syslog_prefix: <none>
String to be prepended to the process name in syslog
entries. Can be further overridden by setting the $CYRUS_SYSLOG_PREFIX
environment variable.
Using the $CYRUS_SYSLOG_PREFIX environment variable has the
additional advantage that it can be set before the imapd.conf is
read, so errors while reading the config file can be syslogged with the
correct prefix.
syslog_facility: <none>
Configure a syslog facility. The default is whatever is
compiled in. Allowed values are: DAEMON, MAIL, NEWS, USER, and LOCAL0 through
to LOCAL7
tcp_keepalive: 0
Enable keepalive on TCP connections.
tcp_keepalive_cnt: 0
Number of TCP keepalive probes to send before declaring
the connection dead (0 == system default).
tcp_keepalive_idle: 0
How long a connection must be idle before keepalive
probes are sent (0 == system default).
For backward compatibility, if no unit is specified, seconds is
assumed.
tcp_keepalive_intvl: 0
Time between keepalive probes (0 == system default).
For backward compatibility, if no unit is specified, seconds is
assumed.
temp_path: /tmp
The pathname to store temporary files in. It is
recommended to use an in-memory filesystem such as tmpfs for this path.
telemetry_bysessionid: 0
If true, log by sessionid instead of PID for
telemetry.
timeout: 32m
The length of the IMAP server's inactivity autologout
timer. The minimum value is 30 minutes. The default is 32 minutes, to allow a
bit of leeway for clients that try to NOOP every 30 minutes.
For backward compatibility, if no unit is specified, minutes is
assumed.
imapidletimeout: <none>
Timeout for idling clients (
RFC 2177). If not set
(the default), the value of "timeout" will be used instead.
For backward compatibility, if no unit is specified, minutes is
assumed.
tls_ca_file: <none>
Deprecated in favor of tls_client_ca_file.
tls_ca_path: <none>
Deprecated in favor of tls_client_ca_dir.
tlscache_db: twoskip
Deprecated in favor of tls_sessions_db.
tlscache_db_path: <none>
Deprecated in favor of tls_sessions_db_path.
tls_cert_file: <none>
Deprecated in favor of tls_server_cert.
tls_cipher_list: DEFAULT
Deprecated in favor of tls_ciphers.
tls_ciphers: DEFAULT
tls_crl_file: <none>
Path to a file containing the Certificate Revocation
List.
tls_client_ca_dir: <none>
Path to a directory containing the CA certificates used
to verify client SSL certificates used for authentication.
tls_client_ca_file: <none>
Path to a file containing the CA certificate(s) used to
verify client SSL certificates used for authentication.
tls_client_cert: <none>
File containing the certificate presented to a server for
authentication during STARTTLS. A value of "disabled" will disable
this server's use of certificate-based authentication.
tls_client_certs: optional
Disable ("off"), allow ("optional",
default) or require ("require") the use of SSL certificates by
clients to authenticate themselves. Allowed values: off,
optional, require
tls_client_key: <none>
File containing the private key belonging to the
tls_client_cert certificate. A value of "disabled" will disable this
server's use of certificate-based authentication.
tls_eccurve: prime256v1
The elliptic curve used for ECDHE. Default is NIST Suite
B prime256. See 'openssl ecparam -list_curves' for possible values.
tls_key_file: <none>
Deprecated in favor of tls_server_key.
tls_required: 0
If enabled, require a TLS/SSL encryption layer to be
negotiated prior to ANY authentication mechanisms being advertised or
allowed.
tls_prefer_server_ciphers: 0
Prefer the ciphers on the server side instead of client
side.
tls_server_ca_dir: <none>
Path to a directory with CA certificates used to verify
certificates offered by the server, when cyrus acts as client. This directory
must have filenames with the hashed value of the certificates (see
openssl(1)).
tls_server_ca_file: <none>
Path to a file containing CA certificates used to verify
certificates offered by the server, when cyrus acts as client.
tls_server_cert: <none>
File containing the certificate, including the full
chain, presented to clients. Two certificates can be set, e.g RSA and EC, if
the filenames are separated with comma without spaces.
tls_server_dhparam: <none>
File containing the DH parameters belonging to the
certificate in tls_server_cert.
tls_server_key: <none>
File containing the private key belonging to the
certificate in tls_server_cert. If not set, tls_server_cert must contain both
private and public key. Two files with keys can be set, if two certificates
are used, in which case the files must be separated with comma without
spaces.
tls_sessions_db: twoskip
The cyrusdb backend to use for the TLS cache.
Allowed values: skiplist, sql, twoskip,
zeroskip
tls_sessions_db_path: <none>
The absolute path to the TLS sessions db file. If not
specified, will be configdirectory/tls_sessions.db
tls_session_timeout: 24h
The length of time that a TLS session will be cached for
later reuse. The maximum value is 24 hours, also the default. A value of 0
will disable session caching.
For backward compatibility, if no unit is specified, minutes is
assumed.
tls_versions: tls1_0 tls1_1 tls1_2 tls1_3
A list of SSL/TLS versions to not disable. Cyrus IMAP
SSL/TLS starts with all protocols, and subtracts protocols not in this list.
Newer versions of SSL/TLS will need to be added here to allow them to get
disabled.
uidl_format: cyrus
Choose the format for UIDLs in pop3. Possible values are
"uidonly", "cyrus", "dovecot" and
"courier". "uidonly" forces the old default of UID,
"cyrus" is UIDVALIDITY.UID. Dovecot is 8 digits of leading hex
(lower case) each UID UIDVALIDITY. Courier is UIDVALIDITY-UID. Allowed values:
uidonly, cyrus, dovecot, courier
umask: 077
The umask value used by various Cyrus IMAP
programs.
userdeny_db: flat
The cyrusdb backend to use for the user access list.
Allowed values: flat, skiplist, sql,
twoskip, zeroskip
userdeny_db_path: <none>
The absolute path to the userdeny db file. If not
specified, will be configdirectory/user_deny.db
username_tolower: 1
Convert usernames to all lowercase before
login/authentication. This is useful with authentication backends which ignore
case during username lookups (such as LDAP).
userprefix: Other Users
If using the alternate IMAP namespace, the prefix for the
other users namespace. The hierarchy delimiter will be automatically
appended.
unix_group_enable: 1
Should we look up groups when using auth_unix (disable
this if you are not using groups in ACLs for your IMAP server, and you are
using auth_unix with a backend (such as LDAP) that can make getgrent() calls
very slow).
unixhierarchysep: 1
Use the UNIX separator character '/' for delimiting
levels of mailbox hierarchy. Turn off to use the netnews separator character
'.'. Note that with the newnews separator, no dots may occur in mailbox names.
The default switched in 3.0 from off to on.
vcard_max_size: 0
Maximum allowed vCard size. If non-zero, CardDAV and JMAP
will reject storage of contacts whose vCard representation is larger than
vcard_max_size.
If set to 0 (the default), a large internally-defined limit will
be applied.
If no unit is specified, bytes is assumed.
virtdomains: off
Configure virtual domain support.
- off
- Cyrus does not know or care about domains. Only the local part of email
addresses is ever considered. This is not recommended for any deployment,
but is currently the default.
- userid
- The user's domain is determined by splitting a fully qualified userid at
the last '@' or '%' symbol. If the userid is unqualified, the
defaultdomain will be used. This is the recommended configuration
for all deployments. If you wish to provide calendaring services you must
use this configuration.
- on
- Fully qualified userids are respected, as per "userid".
Unqualified userids will have their domain determined by doing a reverse
lookup on the IP address of the incoming network interface, or if no
record is found, the defaultdomain will be used.
Allowed values: off, userid, on
virusscan_notification_subject: Automatically deleted
mail
The text used in the subject of email notifications
created by
cyr_virusscan(8) when deleting infected mail.
virusscan_notification_template: <none>
The absolute path to a file containing a template to use
to describe infected messages that have been deleted by
cyr_virusscan(8). See
cyr_virusscan(8) for specification of the
format of this file. If not specified, the builtin default template will be
used.
websocket_timeout: 30m
Set the length of the HTTP server's inactivity autologout
timer when a WebSocket channel has been established. The default is 30
minutes. The minimum value is 0, which will disable WebSockets.
If no unit is specified, minutes is assumed.
webdav_attachments_baseurl: <none>
The base URL for WebDAV managed attachments, excluding
the Cyrus-specific URL paths. Typically, this only includes the HTTP scheme
and host name at which DAV clients may fetch managed attachments from, e.g.
"
https://dav.example.com". If not specified, the target host
of the DAV HTTP request that uploaded the attachment will be used. For JMAP,
the Link.blobId property of JSCalendar objects will be disabled.
webdav_attachments_max_binary_attach_size: 1024K
The maximum byte length of an ATTACH property value when
managed attachment URIs get rewritten to BINARY during iTIP processing. Any
attachment that exceeds this byte size keeps its managed attachment URI as
ATTACH value. A zero size limit causes attachments of any size be rewritten as
BINARY.
xbackup_enabled: 0
Enable support for the XBACKUP command in imapd. If
enabled, admin users can use this command to provoke a replication of
specified users to the named backup channel.
xlist-flag: <none>
Set the special-use flag
flag on the specified
folder when it is autocreated (see the
autocreate_inbox_folders
option). For example, if
xlist-junk: Spam is set, and the folder
Spam is autocreated, the special-use flag
\Junk will be set on
it.
(This option is so named for backward compatibility with old
config files.)
lmtp_catchall_mailbox: <none>
Mail sent to mailboxes which do not exist, will be
delivered to this user. NOTE: This must be an existing local user name with an
INBOX, NOT an email address!
zoneinfo_db: twoskip
The cyrusdb backend to use for zoneinfo. This database is
used by the "tzdist" httpmodules, and is managed by
ctl_zoneinfo(8). Allowed values: flat, skiplist,
twoskip, zeroskip
zoneinfo_db_path: <none>
The absolute path to the zoneinfo db file. If not
specified, will be configdirectory/zoneinfo.db
zoneinfo_dir: <none>
The absolute path to the zoneinfo directory, containing
timezone definitions as generated by the vzic tool. If not specified, whatever
definitions libical finds will be used.
If you are providing a Time Zone Data Distribution Service (i.e.
you have "tzdist" listed in httpmodules), then this
configuration option MUST be specified.
object_storage_enabled: 0
Is Object storage enabled for this server. You also need
to have archiving enabled and archivepartition for the mailbox. Only email
files will be stored on object Storage archive partition will be used to store
any other files.
object_storage_dummy_spool: <none>
Dummy object storage spool; this is for test only. Spool
where user directory (container) will be created to store all emails in a flat
structure.
openio_namespace: <none>
The OpenIO namespace used to store archived email
messages. A namespace identifies the physical platform cyrus must contact.
This directive is used by the OpenIO's SDK to locate its platform entry
point.
openio_account: <none>
The OpenIO account used to account for stored emails.
Accounts are unique in their namespace. They provides virtual partitions, with
quotas and QoS features.
openio_rawx_timeout: 30s
The OpenIO timeout to query to the RAWX services (default
30 sec).
openio_proxy_timeout: 5s
The OpenIO timeout to query to the PROXY services
(default 5 sec).
openio_autocreate: 0
Allow the OpenIO SDK to autocreate containers. Mainly
destined to be turned on development environments. In production, the
container should have been provisioned with the mailboxes.
openio_verbosity: <none>
Sets the logging verbosity of the OpenIO's internal
behavior. Admissible values are: "warning", "notice",
"info", "debug", "trace", "quiet". The
default verbosity is "warning". Set to "notice" for a few
lines on a per-client basis. Set to "info" for a few lines on a
per-request basis. Set to "debug" Set to "trace" to
activate the underlying libcurl debug output. Enabling a verbosity higher to
equal than "debug" requires the cyrus to be set in debug mode. The
special "quiet" value disables all kinds of logging at the GLib
level.
caringo_hostname: <none>
The Caringo hostname used to store archived email
messages. A hostname identifies the physical platform cyrus must contact. This
directive is used by the Caringo's SDK (CastorSDK: Caringo Simple Content
Storage Protocol (SCSP) on HTTP 1.1 using a RESTful architecture.
caringo_port: 80
The port of the caringo server (caringo_hostname);
default is 80.
fastmailsharing: 0
If enabled, use FastMail style sharing (oldschool full
server paths).