teensy_loader_cli(1) | User Manuals | teensy_loader_cli(1) |
NAME¶
teensy_loader_cli - load and run programs onto your Teensy micro controllerSYNOPSIS¶
teensy_loader_cli --mcu MCU [-w] [-r] [-s] [-n] [-b] [-v] [-h] file.hexDESCRIPTION¶
The teensy loader cli is a command-line alternative to the graphical teensy loader which is included with Teensyduino. The cli version is preferred by advanced users who want to automate programming, typically from within a Makefile or similar.OPTIONS¶
- --mcu
- Specify which connected Teensy controller to work with (e.g. TEENSY36). To
list supported MCUs, use:
teensy_loader_cli --list-mcus
- -w
- Wait for device to appear
- -r
- Use hard reboot if device not online.
This option requires another Teensy to be connected, running the rebootor firmware.
- -s
- Use soft reboot if device not online (Teensy 3.x only)
- -n
- No reboot after programming
- -b
- Boot only, do not program
- -v
- Verbose output
SEE ALSO¶
http://www.pjrc.com/teensy/loader_cli.htmlAUTHOR¶
teensy_loader_cli was developed by Paul Stoffregen <paul@pjrc.com>This manual page was written for the Debian project by Michael Stapelberg <stapelberg@debian.org> (but may be used by others).
DECEMBER 2017 | Linux |