Scroll to navigation

1() 1()

NAME

pyocd-flashtool - ARM Cortex-M programming tool

DESCRIPTION

pyocd-flashtool is an ARM Cortex-M programming tool

Summary

pyOCD is an Open Source python based library for programming and debugging ARM Cortex-M microcontrollers using CMSIS-DAP.

Includes support for flashing new binaries, resetting the device, halt, step, resume read/write memory and set/remove breakpoints.

Support

Firmware files included in the upstream source are NOT included in the Debian package due to a lack of source code. Target files can be downloaded separately from https://github.com/mbedmicro/pyOCD/tree/master/binaries

Available targets for use with --target option: lpc824, kinetis, w7500, kv11z7, lpc4088qsb, kv10z7, k20d50m, ncs36510, kl28z, kl25z, k82f25615, k28f15, maxwsnenv, max32600mbed, k22fa12, lpc4088, lpc4330, ke18f16, kl46z, stm32f103rc, kl82z7, lpc54114, kl43z4, kl26z, lpc11xx_32, lpc800, rtl8195am, kl05z, lpc1768, kw41z4, lpc4088dm, stm32f051, cortex_m, lpc11u24, kl02z, kw01z4, k64f, k22f, ke15z7, nrf51, nrf52, kl27z4, kw40z4, k66f18

Usage

usage: pyocd-flashtool [-h] [--version] [-b BOARD_ID] [-l] [-d LEVEL] [-t TARGET] [-f FREQUENCY] [-ce | -se] [-u]
[-a ADDRESS] [-n COUNT] [-s SKIP] [-hp] [-fp] [-da DAPARG [DAPARG ...]] [--mass-erase] [file] [{bin,hex}]

Flash utility

positional arguments:
file File to program {bin,hex} File format. Default is to use the file extension
System Message: ERROR/3 (debian/pyocd-flashtool.rst:, line 47)
Unexpected indentation.
(.bin or .hex)


optional arguments:
-h, --help
show this help message and exit
--version
show program's version number and exit
-b BOARD_ID, --board BOARD_ID
Connect to board by board id. Use -l to list all connected boards.
-l, --list
List all connected boards.
-d LEVEL, --debug LEVEL
Set the level of system logging output. Supported choices are: debug, info, warning, critical, error
-t TARGET, --target TARGET
Override target to debug. Supported targets are: lpc824, kinetis, w7500, kv11z7, lpc4088qsb, kv10z7, k20d50m, ncs36510, kl28z, kl25z, k82f25615, k28f15, maxwsnenv, max32600mbed, k22fa12, lpc4088, lpc4330, ke18f16, kl46z, stm32f103rc, kl82z7, lpc54114, kl43z4, kl26z, lpc11xx_32, lpc800, rtl8195am, kl05z, lpc1768, kw41z4, lpc4088dm, stm32f051, lpc11u24, kl02z, kw01z4, k64f, k22f, ke15z7, nrf51, nrf52, kl27z4, kw40z4, k66f18
-f FREQUENCY, --frequency FREQUENCY
Set the SWD clock frequency in Hz.
-ce, --chip_erase
Use chip erase when programming.
-se, --sector_erase
Use sector erase when programming.
-u, --unlock
Unlock the device.
-a ADDRESS, --address ADDRESS
Address. Used for the sector address with sector erase, and for the address where to flash a binary.
-n COUNT, --count COUNT
Number of sectors to erase. Only applies to sector erase. Default is 1.
-s SKIP, --skip SKIP
Skip programming the first N bytes. This can only be used with binary files
-hp, --hide_progress
Don't display programming progress.
-fp, --fast_program
Use only the CRC of each page to determine if it already has the same data.

-da DAPARG [DAPARG ...], --daparg DAPARG [DAPARG ...]
Send setting to DAPAccess layer.

--mass-erase
Mass erase the target device.


--chip_erase and --sector_erase can be used alone as individual commands, or they can be used in conjunction with flashing a binary or hex file. For the former, only the erase option will be performed. With a file, the erase options specify whether to erase the entire chip before flashing the file, or just to erase only those sectors occupied by the file. For a standalone sector erase, the --address and --count options are used to specify the start address of the sector to erase and the number of sectors to erase.

COPYRIGHT

2006-2013 ARM Limited
0.12.0