PCSC_SCAN(1) | General Commands Manual | PCSC_SCAN(1) |
NAME¶
pcsc_scan - regularly scans every PC/SC readers connected to the hostSYNOPSIS¶
pcsc_scan [options]DESCRIPTION¶
This manual page documents the pcsc_scan command.pcsc_scan is a program that regularly scans every PC/SC readers connected to the host and display the status of the cards inserted in the readers.
The normal way to exit the program is to use Control-C.
When pcsc_scan is started it asks PC/SC layer the list of available smart card readers. The list is printed. A sequence number is printed before each reader.
Example: PC/SC device scanner V 1.4.27 (c) 2001-2017, Ludovic Rousseau Scanning present readers... 0: Gemalto PC Twin Reader
When a card is inserted in any reader some information is printed:
- date and time:
- Wed Apr 12 14:25:30 2017
- reader name:
- Reader 0: Gemalto PC Twin Reader
- card state and occurred event:
- Card state: Card inserted,
- ATR in case of card insertion:
- ATR: 3B 82 00 86 1E
- print an ATR analysis if the ATR_analysis command is available:
- ATR: 3B 82 00 86 1E + TS = 3B --> Direct Convention + T0 = 82, Y(1): 1000, K: 2 (historical bytes) TD(1) = 00 --> Y(i+1) = 0000, Protocol T = 0 ----- + Historical bytes: 86 1E
OPTIONS¶
- -h
- print help
- -V
- print version number
- -n
- do not print ATR analysis. Use this option if ATR_analysis is not available for example.
- -r
- prints the list of readers and then exits.
- -s
- stress mode. Sends APDU commands to the card indefinitely (until the card or the reader is removed).
- -q
- quiet: prints minimal messages.
- -v
- verbose: prints additional messages (default).
SEE ALSO¶
pcscd(8), ATR_analysis(1)AUTHOR¶
Ludovic Rousseau <ludovic.rousseau@free.fr>April 10, 2018 |