|icmstart(1)||starts icmbuild program maintenance||icmstart(1)|
NAME¶icmstart - A startup script for icmbuild program maintenance
SYNOPSIS¶icmstart [Options] top-dir [program|library]
DESCRIPTION¶Although icmake-scripts can be written from scratch for handling program maintenance, often the required actions are highly comparable. This observation resulted in the construction of two icmake-tools: icmstart(1), initializing a directory for program development and icmbuild(1), handling the actual program maintenance. Both come predefined with icmake’s distribution, to initialize and maintain C++ programs (or, after minimal adaptation, C) programs). They can also easily be tailored to other programming languages. The icmstart script and icmbuild program can directly be called: icmstart is an icmake script, for which the command-shell calls icmake; icmbuild is a small C program that calls icmake to process the icmbuild script in (commonly) /usr/lib/icmake.
This man-page covers the icmstart script; refer to the icmbuild(1) man-page for information about how icmbuild can be used.
The icmstart script is a generic script that can be used to initialize a directory with a basic set of files that are commonly used when developing a C++ or C program.
Icmstart creates an initial directory (here named `top-dir’) and installs the files CLASSES, VERSION and icmconf below top-dir. A second argument `program’ or `library’ may be specified as the default mode of operation of the icmbuild(1) script, usually resulting in the addition of additional skeleton source files. If the predefined set of files doesn’t fit your needs, then the default set can easily be tailored to your needs. The default set of skeleton files is listed in the file /etc/icmake/icmstart.rc. Refer to the icmstart.rc(7) man-page for information about how this file is structured and how it can be adapted.
After changing to the directory created by icmstart icmbuild(1) may be used for program maintenance.
OPTIONS¶Icmstart supports the following options, which (when specified) must be icmstart’s first arguments:
Basic installation: the files VERSION, usage.cc and version.cc are not installed, and the #define USE_VERSION entry in icmconf is commented out.
- -c confpath
Use the configuration files (icmstart.rc, AUTHOR, YEARS and VERSION) if found in `confpath’ rather than in ~/.icmake and/or /etc/icmake/. Once a file is found it is used allowing partial overrides of the default files provided by icmake(1).
Do not execute any commands, but show the commands that would have been executed on the standard output.
Do not install files.
- -r Unconditionally replace existing files. If -r is not provided icmstart will ask the user to confirm that an existing file must be overwritten. If a skeleton specification refers to a directory, the full directory and its subdirectories will be replaced.
- -s skeleton-path
By default skeleton files are listed in the skeleton resource file /usr/share/icmake/icmstart.rc. Alternatively, the skeleton resource file may be specified by the ICM environment variable, which -in turn- may be overruled by the path specified with the -s option. The skeleton path may be specified as a full file-path or as a directory, in which case the skeleton resource file is assumed to be icmstart.rc (see below at SKELETON FILES). Since icmstart uses cp to install files, cp must be available when icmstart should install skeleton files.
SKELETON FILES¶Skeleton resource files may contain comment (empty lines and lines beginning with the hash-mark (#)) which is ignored, and should otherwise contain specifications of resource s to install.
The default resource specification file is /etc/icmake/icmstart.rc, containing:
CLASSES icmconf P main.cc P main.ih P usage.cc P version.cc P ? scanner P ? parserThis file is overruled by ~/.icmake/icmstart.rc. The ~/.icmake directory (called `configuration directory’ below) can be prepared using the following system command:
cp -r /etc/icmake ~/.icmakeThis directory can be provided with skeleton files. Default skeleton files are commonly found in /usr/share/icmake, and could be copied to the configuration directory and referred to by the configuration directory’s file icmstart.rc. See icmstart.rc(7) for details about how skeleton files can be referred to icmstart.rc.
CONFIGURATION FILES¶The configuration directory’s files icmstart.rc, AUTHOR, YEARS and VERSION are recognized as skeleton files and are, if available, processed by icmstart.
If the -c option was specified configuration files found in the path specified at this option are used. If not specified or if a file isn’t found then the path ~/icmake is inspected. If a configuration file isn’t found in ~/icmake either, configuration files in /etc/icmake are used.
Configuration files are optional; if absent icmstart can still be used, but in normal cases at least icmstart.rc is provided.
In addition to icstart.rc consider defining the files AUTHOR, VERSION, and YEARS in the configuration directory:
- If the file AUTHOR exists it should have one line, defining the
author of the program. E.g.,
#define AUTHOR "Frank B. Brokken <email@example.com>"If it does not exist icmstart uses the default #define AUTHOR "".
- If the file VERSION exists it should have one line, defining the
program’s version. E.g.,
#define VERSION "1.00.00"If it does not exist icmstart uses the default #define VERSION "0.00.00".
- If the file YEARS exists it should have one line, defining the
program’s initial release year or range of release years. E.g.,
#define YEARS "2016"or a range of years can be defined:
#define YEARS "1992-2016"If it does not exist icmstart uses the default #define YEARS "yyyy" where yyyy is the current year.
The AUTHOR, VERSION, and YEARS definitions are concatenated to one file, called VERSION, which is installed in the top-level directory.
If the file icmstart.rc does not exist (or is empty) icmstart merely installs the top-level directory, icmconf and VERSION.
FILES¶The mentioned paths are sugestive only and may be installation dependent:
- /usr/share/icmake/icmconf Example of a icmbuild configuration file;
- /usr/share/icmake/CLASSES Example of a icmbuild CLASSES file.
- /etc/icmake/icmstart.rc Default skeleton resource file.
SEE ALSO¶icmake(1), icmbuild(1), icmconf(7), icmstart.rc(7).
BUGS¶Path names containing blanks are not supported.
COPYRIGHT¶This is free software, distributed under the terms of the GNU General Public License (GPL).
AUTHOR¶Frank B. Brokken (firstname.lastname@example.org).