## table of contents

- buster 1:21.2.6+dfsg-1
- testing 1:23.2.6+dfsg-1
- unstable 1:23.2.6+dfsg-1
- experimental 1:24.0~rc3+dfsg-1

rand(3erl) | Erlang Module Definition | rand(3erl) |

# NAME¶

rand - Pseudo random number generation.# DESCRIPTION¶

This module provides a pseudo random number generator. The module contains a number of algorithms. The uniform distribution algorithms use the xoroshiro116+ and xorshift1024* algorithms by Sebastiano Vigna. The normal distribution algorithm uses the Ziggurat Method by Marsaglia and Tsang on top of the uniform distribution algorithm.For some algorithms, jump functions are provided for generating non-overlapping sequences for parallel computations. The jump functions perform calculations equivalent to perform a large number of repeated calls for calculating new states.

The following algorithms are provided:

*exrop*:- Xoroshiro116+, 58 bits precision and period of 2^116-1

Jump function: equivalent to 2^64 calls

*exs1024s*:- Xorshift1024*, 64 bits precision and a period of 2^1024-1

Jump function: equivalent to 2^512 calls

*exsp*:- Xorshift116+, 58 bits precision and period of 2^116-1

Jump function: equivalent to 2^64 calls

This is a corrected version of the previous default algorithm,
that now has been superseded by Xoroshiro116+ (*exrop*). Since there is
no native 58 bit rotate instruction this algorithm executes a little (say
< 15%) faster than *exrop*. See the algorithms' homepage.

The default algorithm is *exrop* (Xoroshiro116+). If a
specific algorithm is required, ensure to always use *seed/1* to
initialize the state.

Undocumented (old) algorithms are deprecated but still implemented so old code relying on them will produce the same pseudo random sequences as before.

**Note:**

Uniform integer ranges had a skew in the probability distribution that was not noticable for small ranges but for large ranges less than the generator's precision the probability to produce a low number could be twice the probability for a high.

Uniform integer ranges larger than or equal to the generator's precision used a floating point fallback that only calculated with 52 bits which is smaller than the requested range and therefore were not all numbers in the requested range even possible to produce.

Uniform floats had a non-uniform density so small values i.e less than 0.5 had got smaller intervals decreasing as the generated value approached 0.0 although still uniformly distributed for sufficiently large subranges. The new algorithms produces uniformly distributed floats on the form N * 2.0^(-53) hence equally spaced.

Every time a random number is requested, a state is used to calculate it and a new state is produced. The state can either be implicit or be an explicit argument and return value.

The functions with implicit state use the process dictionary
variable *rand_seed* to remember the current state.

If a process calls *uniform/0*,
*uniform/1* or *uniform_real/0* without setting a
seed first, *seed/1* is called automatically with the default
algorithm and creates a non-constant seed.

The functions with explicit state never use the process dictionary.

*Examples:*

Simple use; creates and seeds the default algorithm with a non-constant seed if not already done:

R0 = rand:uniform(), R1 = rand:uniform(),

Use a specified algorithm:

_ = rand:seed(exs1024s), R2 = rand:uniform(),

Use a specified algorithm with a constant seed:

_ = rand:seed(exs1024s, {123, 123534, 345345}), R3 = rand:uniform(),

Use the functional API with a non-constant seed:

S0 = rand:seed_s(exrop), {R4, S1} = rand:uniform_s(S0),

Textbook basic form Box-Muller standard normal deviate

R5 = rand:uniform_real(), R6 = rand:uniform(), SND0 = math:sqrt(-2 * math:log(R5)) * math:cos(math:pi() * R6)

Create a standard normal deviate:

{SND1, S2} = rand:normal_s(S1),

Create a normal deviate with mean -3 and variance 0.5:

{ND0, S3} = rand:normal_s(-3, 0.5, S2),

**Note:**

*crypto:rand_seed/0*.

For all these generators the lowest bit(s) has got a slightly less
random behaviour than all other bits. 1 bit for *exrop* (and
*exsp*), and 3 bits for *exs1024s*. See for example the
explanation in the Xoroshiro128+ generator source code:

Beside passing BigCrush, this generator passes the PractRand test suite up to (and included) 16TB, with the exception of binary rank tests, which fail due to the lowest bit being an LFSR; all other bits pass all tests. We suggest to use a sign test to extract a random Boolean value.

If this is a problem; to generate a boolean use something like this:

(rand:uniform(16) > 8)

And for a general range, with *N = 1* for *exrop*, and
*N = 3* for *exs1024s*:

(((rand:uniform(Range bsl N) - 1) bsr N) + 1)

The floating point generating functions in this module waste the lowest bits when converting from an integer so they avoid this snag.

# DATA TYPES¶

builtin_alg()= exs64 | exsplus | exsp | exs1024 | exs1024s | exrop

alg()=builtin_alg()| atom()

alg_handler()= #{type :=alg(), bits => integer() >= 0, weak_low_bits => integer() >= 0, max => integer() >= 0, next := fun((alg_state()) -> {integer() >= 0,alg_state()}), uniform => fun((state()) -> {float(),state()}), uniform_n => fun((integer() >= 1,state()) -> {integer() >= 1,state()}), jump => fun((state()) ->state())}

alg_state()=exs64_state()|exsplus_state()|exs1024_state()|exrop_state()| term()

state()= {alg_handler(),alg_state()}

Algorithm-dependent state.

export_state()= {alg(),alg_state()}

Algorithm-dependent state that can be printed or saved to file.

exs64_state()

Algorithm specific internal state

exsplus_state()

Algorithm specific internal state

exs1024_state()

Algorithm specific internal state

exrop_state()

Algorithm specific internal state

# EXPORTS¶

export_seed() -> undefined | export_state()

Returns the random number state in an external format. To be used
with *seed/1*.

export_seed_s(State :: state()) -> export_state()

Returns the random number generator state in an external format.
To be used with *seed/1*.

jump() -> NewState :: state()

Returns the state after performing jump calculation to the state in the process dictionary.

This function generates a *not_implemented* error exception
when the jump function is not implemented for the algorithm specified in the
state in the process dictionary.

jump(State :: state()) -> NewState :: state()

Returns the state after performing jump calculation to the given state.

This function generates a *not_implemented* error exception
when the jump function is not implemented for the algorithm specified in the
state.

normal() -> float()

Returns a standard normal deviate float (that is, the mean is 0 and the standard deviation is 1) and updates the state in the process dictionary.

normal(Mean :: number(), Variance :: number()) -> float()

Returns a normal N(Mean, Variance) deviate float and updates the state in the process dictionary.

normal_s(State :: state()) -> {float(), NewState :: state()}

Returns, for a specified state, a standard normal deviate float (that is, the mean is 0 and the standard deviation is 1) and a new state.

normal_s(Mean :: number(),Variance :: number(),State0 :: state()) ->{float(), NewS :: state()}

Returns, for a specified state, a normal N(Mean, Variance) deviate float and a new state.

seed(AlgOrStateOrExpState ::builtin_alg() | state() | export_state()) ->state()

Seeds random number generation with the specifed algorithm and
time-dependent data if *AlgOrStateOrExpState* is an algorithm.

Otherwise recreates the exported seed in the process dictionary,
and returns the state. See also *export_seed/0*.

seed(Alg :: builtin_alg(),Seed :: {integer(), integer(), integer()}) ->state()

Seeds random number generation with the specified algorithm and integers in the process dictionary and returns the state.

seed_s(AlgOrStateOrExpState ::builtin_alg() | state() | export_state()) ->state()

Seeds random number generation with the specifed algorithm and
time-dependent data if *AlgOrStateOrExpState* is an algorithm.

Otherwise recreates the exported seed and returns the state. See
also *export_seed/0*.

seed_s(Alg :: builtin_alg(),Seed :: {integer(), integer(), integer()}) ->state()

Seeds random number generation with the specified algorithm and integers and returns the state.

uniform() -> X :: float()

Returns a random float uniformly distributed in the value range
*0.0 =< X < 1.0* and updates the state in the process
dictionary.

The generated numbers are on the form N * 2.0^(-53), that is; equally spaced in the interval.

**Warning:**

*0.0*which can be fatal for certain applications. If that is undesired you can use

*(1.0 - rand:uniform())*to get the interval

*0.0 < X =< 1.0*, or instead use

*uniform_real/0*.

If neither endpoint is desired you can test and re-try like this:

my_uniform() -> case rand:uniform() of 0.0 -> my_uniform(); X -> X end end.

uniform_real() -> X :: float()

Returns a random float uniformly distributed in the value range
*DBL_MIN =< X < 1.0* and updates the state in the process
dictionary.

Conceptually, a random real number *R* is generated from the
interval *0 =< R < 1* and then the closest rounded down
normalized number in the IEEE 754 Double precision format is returned.

**Note:**

*uniform/0*because all bits in the mantissa are random. This property, in combination with the fact that exactly zero is never returned is useful for algoritms doing for example

*1.0 / X*or

*math:log(X)*.

See *uniform_real_s/1* for more explanation.

uniform(N :: integer() >= 1) -> X :: integer() >= 1

Returns, for a specified integer *N >= 1*, a random
integer uniformly distributed in the value range *1 =< X =< N*
and updates the state in the process dictionary.

uniform_s(State :: state()) -> {X :: float(), NewState :: state()}

Returns, for a specified state, random float uniformly distributed
in the value range *0.0 =< X < 1.0* and a new state.

The generated numbers are on the form N * 2.0^(-53), that is; equally spaced in the interval.

**Warning:**

*0.0*which can be fatal for certain applications. If that is undesired you can use

*(1.0 - rand:uniform(State))*to get the interval

*0.0 < X =< 1.0*, or instead use

*uniform_real_s/1*.

If neither endpoint is desired you can test and re-try like this:

my_uniform(State) -> case rand:uniform(State) of {0.0, NewState} -> my_uniform(NewState); Result -> Result end end.

uniform_real_s(State :: state()) ->{X :: float(), NewState :: state()}

Returns, for a specified state, a random float uniformly
distributed in the value range *DBL_MIN =< X < 1.0* and updates
the state in the process dictionary.

Conceptually, a random real number *R* is generated from the
interval *0 =< R < 1* and then the closest rounded down
normalized number in the IEEE 754 Double precision format is returned.

**Note:**

*uniform_s/1*because all bits in the mantissa are random. This property, in combination with the fact that exactly zero is never returned is useful for algoritms doing for example

*1.0 / X*or

*math:log(X)*.

The concept implicates that the probability to get exactly zero is
extremely low; so low that this function is in fact guaranteed to never
return zero. The smallest number that it might return is *DBL_MIN*,
which is 2.0^(-1022).

The value range stated at the top of this function description is
technically correct, but *0.0 =< X < 1.0* is a better description
of the generated numbers' statistical distribution. Except that exactly 0.0
is never returned, which is not possible to observe statistically.

For example; for all sub ranges *N*2.0^(-53) =< X <
(N+1)*2.0^(-53)* where *0 =< integer(N) < 2.0^53* the
probability is the same. Compare that with the form of the numbers generated
by *uniform_s/1*.

Having to generate extra random bits for small numbers costs a
little performance. This function is about 20% slower than the regular
*uniform_s/1*

uniform_s(N :: integer() >= 1, State :: state()) ->{X :: integer() >= 1, NewState :: state()}

Returns, for a specified integer *N >= 1* and a state, a
random integer uniformly distributed in the value range *1 =< X =<
N* and a new state.

stdlib 3.7.1 | Ericsson AB |