- buster 5.1.1-3
|VST(5)||VHDL subset of ASIM/LIP6/CAO-VLSI lab.||VST(5)|
VHDL structural subset.
ORIGIN¶This software belongs to the ALLIANCE CAD SYSTEM developed by the ASIM team at LIP6 laboratory of Université Pierre et Marie CURIE, in Paris, France.
Web : http://asim.lip6.fr/recherche/alliance/
E-mail : email@example.com
DESCRIPTION¶This document describes the ALLIANCE VHDL subset for structural descriptions.
The declaration part of a structural description includes signal decalarations and component declarations.
An internal signal can be declared of any type supported by the present VHDL subset except reg_bit and reg_vector.
A component must be declared with exactly the same port description as in its entity specification. This means that local ports are to be declared with the same name, type and kind and in the same order.
A structural description is a set of component instanciation statements. Instances' ports are connected to each other trough signals in a port map specification. Both explicit and implicit port map specifications are supported by the ALLIANCE VHDL subset.
The present version of the VHDL compiler does not allow unconnected ports (the open mode is not supported).
Only the concatenation operator (&) can be used in the actual part (effective signal conntected to a formal port) of a port map specification.
EXAMPLES¶Here is the description of an adder with an accumulator register.
entity add_accu is port ( clk : in bit; command : in bit; data_in : in bit_vector (31 downto 0); data_out : out bit_vector (31 downto 0); cry_out : out bit; vdd : in bit; vss : in bit ); end add_accu; architecture structural of add_accu is signal eff_data : bit_vector (31 downto 0); -- effective operande signal adder_out : bit_vector (31 downto 0); -- adder's result signal accu_out : bit_vector (31 downto 0); -- accumulator component adder port (a : in bit_vector (31 downto 0); b : in bit_vector (31 downto 0); res : out bit_vector (31 downto 0)); end component; component and_32 port (a : in bit_vector (31 downto 0); cmd : in bit; res : out bit_vector (31 downto 0)); end component; component falling_edge_reg port (din : in bit_vector (31 downto 0); clk : in bit; dout : out bit_vector (31 downto 0)); end component; begin my_adder : adder port map (a => eff_data, b => accu_out, res => adder_out); my_mux : and_32 port map (cmd => command, a => accu_out, res => eff_data); my_reg : falling_edge_reg port map (din => adder_out, clk => clk, dout => accu_out); end;
SEE ALSO¶vhdl(5), vbe(5), asimut(1)
BUG REPORT¶This tool is under development at the ASIM department of the LIP6 laboratory.
We need your feedback to improve documentation and tools.
|October 1, 1997||ASIM/LIP6|