table of contents
| 1() | 1() |
NAME¶
pyocd-flashtool - ARM Cortex-M programming tool
DESCRIPTION¶
pyocd-flashtool is an ARM Cortex-M programming tool
Summary¶
pyOCD is an Open Source python based library for programming and debugging ARM Cortex-M microcontrollers using CMSIS-DAP.
Includes support for flashing new binaries, resetting the device, halt, step, resume read/write memory and set/remove breakpoints.
Support¶
Firmware files included in the upstream source are NOT included in the Debian package due to a lack of source code. Target files can be downloaded separately from https://github.com/mbedmicro/pyOCD/tree/master/binaries
Available targets for use with --target option: lpc824, kinetis, w7500, kv11z7, lpc4088qsb, kv10z7, k20d50m, ncs36510, kl28z, kl25z, k82f25615, k28f15, maxwsnenv, max32600mbed, k22fa12, lpc4088, lpc4330, ke18f16, kl46z, stm32f103rc, kl82z7, lpc54114, kl43z4, kl26z, lpc11xx_32, lpc800, rtl8195am, kl05z, lpc1768, kw41z4, lpc4088dm, stm32f051, cortex_m, lpc11u24, kl02z, kw01z4, k64f, k22f, ke15z7, nrf51, nrf52, kl27z4, kw40z4, k66f18
Usage¶
- usage: pyocd-flashtool [-h] [--version] [-b BOARD_ID] [-l] [-d LEVEL] [-t TARGET] [-f FREQUENCY] [-ce | -se] [-u]
- [-a ADDRESS] [-n COUNT] [-s SKIP] [-hp] [-fp] [-da DAPARG [DAPARG ...]] [--mass-erase] [file] [{bin,hex}]
Flash utility
- positional arguments:
- file File to program {bin,hex} File format. Default is to use the file extension
- System Message: ERROR/3 (debian/pyocd-flashtool.rst:, line 47)
- Unexpected indentation.
- -h, --help
- show this help message and exit
- --version
- show program's version number and exit
- -b BOARD_ID, --board BOARD_ID
- Connect to board by board id. Use -l to list all connected boards.
- -l, --list
- List all connected boards.
- -d LEVEL, --debug LEVEL
- Set the level of system logging output. Supported choices are: debug, info, warning, critical, error
- -t TARGET, --target TARGET
- Override target to debug. Supported targets are: lpc824, kinetis, w7500, kv11z7, lpc4088qsb, kv10z7, k20d50m, ncs36510, kl28z, kl25z, k82f25615, k28f15, maxwsnenv, max32600mbed, k22fa12, lpc4088, lpc4330, ke18f16, kl46z, stm32f103rc, kl82z7, lpc54114, kl43z4, kl26z, lpc11xx_32, lpc800, rtl8195am, kl05z, lpc1768, kw41z4, lpc4088dm, stm32f051, lpc11u24, kl02z, kw01z4, k64f, k22f, ke15z7, nrf51, nrf52, kl27z4, kw40z4, k66f18
- -f FREQUENCY, --frequency FREQUENCY
- Set the SWD clock frequency in Hz.
- -ce, --chip_erase
- Use chip erase when programming.
- -se, --sector_erase
- Use sector erase when programming.
- -u, --unlock
- Unlock the device.
- -a ADDRESS, --address ADDRESS
- Address. Used for the sector address with sector erase, and for the address where to flash a binary.
- -n COUNT, --count COUNT
- Number of sectors to erase. Only applies to sector erase. Default is 1.
- -s SKIP, --skip SKIP
- Skip programming the first N bytes. This can only be used with binary files
- -hp, --hide_progress
- Don't display programming progress.
- -fp, --fast_program
- Use only the CRC of each page to determine if it already has the same data.
- -da DAPARG [DAPARG ...], --daparg DAPARG [DAPARG ...]
- Send setting to DAPAccess layer.
- --mass-erase
- Mass erase the target device.
--chip_erase and --sector_erase can be used alone as individual commands, or they can be used in conjunction with flashing a binary or hex file. For the former, only the erase option will be performed. With a file, the erase options specify whether to erase the entire chip before flashing the file, or just to erase only those sectors occupied by the file. For a standalone sector erase, the --address and --count options are used to specify the start address of the sector to erase and the number of sectors to erase.
COPYRIGHT¶
2006-2013 ARM Limited
| 0.12.0 |