|LAMMPS(1)||General Commands Manual||LAMMPS(1)|
LAMMPS - Molecular Dynamics Simulator.
lmp -in <input file> [OPTIONS] ...
mpirun -np 2 lmp -in <input file> [OPTIONS] ...
lmp -r2data file.restart file.data
LAMMPS is a classical molecular dynamics code, and an acronym for Large-scale Atomic/Molecular Massively Parallel Simulator. LAMMPS has potentials for soft materials (bio-molecules, polymers) and solid-state materials (metals, semiconductors) and coarse-grained or mesoscopic systems. It can be used to model atoms or, more generically, as a parallel particle simulator at the atomic, meso, or continuum scale.
See https://lammps.sandia.gov/ for more information and documentation.
The LAMMPS executable can have different names depending on how it was configured, compiled and installed. It will be either lmp or lmp_<machine name>. The <machine name> suffix corresponds to the (machine specific) makefile used to compile LAMMPS when using the conventional build process. When building LAMMPS using CMake this <machine name> parameter can be chosen arbitrarily at configuration time, but more common is to just use lmp without a suffix. In this manpage we will use lmp to represent any of those names.
- -h or -help
- Print a brief help summary and a list of settings and options compiled into this executable. It also explicitly lists all LAMMPS styles (atom_style, fix, compute, pair_style, bond_style, etc) available in the specific executable. This can tell you if the command you want to use was included via the appropriate package at compile time. LAMMPS will print the info and immediately exit if this switch is used.
- -e or -echo
- Set the style of command echoing. The style can be none or screen or log or both. Depending on the style, each command read from the input script will be echoed to the screen and/or logfile. This can be useful to figure out which line of your script is causing an input error. The default value is log.
- -i <input file> or -in <input file>
- Specify a file to use as an input script. If it is not specified, LAMMPS reads its script from standard input. This is a required switch when running LAMMPS in multi-partition mode.
- -k on/off [keyword value] or -kokkos on/off [keyword value]
- Enable or disable general KOKKOS support, as provided by the KOKKOS package. Even if LAMMPS is built with this package, this switch must be set to on to enable running with KOKKOS-enabled styles. More details on this switch and its optional keyword value pairs are discussed at: https://lammps.sandia.gov/doc/Run_options.html
- -l <log file> or -log <log file>
- Specify a log file for LAMMPS to write status information to. The default value is "log.lammps". If the file name "none" is used, LAMMPS will not write a log file. In multi-partition mode only some high-level all-partition information is written to the "<log file>" file, the remainder is written in a per-partition file "<log file>.N" with "N" being the respective partition number, unless overridden by the -plog flag (see below).
- -m <number> or -mpicolor <number>
- If used, this must be the first command-line argument after the LAMMPS executable name. It is only used when LAMMPS is launched by an mpirun command which also launches one or more other executable(s) at the same time. LAMMPS and the other executable(s) perform an MPI_Comm_split(), each with their own different colors, to split the MPI_COMM_WORLD communicator for each executable to the subset of processors they are supposed to be actually running on. Currently, this is only used in LAMMPS to perform client/server messaging with another application. LAMMPS can act as either a client or server (or both).
- -nc or -nocite
- Disable writing the "log.cite" file which is normally written to list references for specific cite-able features used during a LAMMPS run.
- -pk <style> [options] or -package <style> [options]
- Invoke the packagewith <style> and optional arguments. The syntax is the same as if the command appeared in an input script. For example "-pk gpu 2" is the same as "package gpu 2" in the input script. The possible styles and options are discussed in the LAMMPS manual for the "package" command. This switch can be used multiple times, e.g. to set options for the USER-INTEL and USER-OMP packages when used together. Along with the "-sf" or "-suffix" switch, this is a convenient mechanism for invoking accelerator packages and their options without having to edit an input script.
- -p or -partition
- Invoke LAMMPS in multi-partition mode. Without this, LAMMPS uses all P processors allocated via MPI to run a single simulation. If this switch is used, the P processors are split into separate partitions and each partition runs its own simulation. The arguments to the switch specify the number of processors in each partition. Arguments of the form "MxN" mean M partitions, each with N processors. Arguments of the form "N" mean a single partition with N processors. The sum of processors in all partitions must be equal P. Thus the command “-partition 8x2 4 5” has 10 partitions and runs on a total of 25 processors. Running with multiple partitions is required for multi-replica simulations, where each replica runs on on one or more few processors.
- -pl <basename> or -plog <basename>
- Specify the base name for the per-partition log files in multi-partition runs, where partition N writes log information to <basename>.N. If basename is set to "none", then no per-partition log files are created. This overrides the name specified in the -log command-line option.
- -ps <basename> or -pscreen <basename>
- Specify the base name for the per-partition screen files in multi-partition runs, where partition N writes screen output to <basename>.N. If basename is set to "none", then no per-partition screen files are created. The default value is "screen" or whatever is set by the -screen flag.
- -r2data <restart file> [remap] <data file> or
- -restart2data <restart file> [remap] <data file> Convert <restart file> previously written by LAMMPS into a data file and immediately exit. This option has replaced the external restart2data executable. Following <restart file> argument, the optional word "remap" may be used. This has the same effect like adding it to a "read_restart" command. The syntax following the <data file> name is identical to the arguments of the "write_data" command. See the LAMMPS manual for details on either of the two commands.
- -r2dump <restart file> [remap] <dump file> or
- -restart2dump <restart file> [remap] <dump file> Convert <restart file> previously written by LAMMPS into a dump file and immediately exit. Following <restart file> argument, the optional word "remap" may be used. This has the same effect like adding it to a "read_restart" command. The syntax following the <dump file> name is identical to the arguments of the "dump" command. See the LAMMPS manual for details on either of the two commands.
- -sc <file name> or -screen <file name>
- Specify a file for LAMMPS to write its screen information to. By default, this will be the standard output. If <file name> is "none", (most) screen output will be suppressed. In multi-partition mode only some high-level all-partition information is written to the screen or "<file name>" file, the remainder is written in a per-partition file "screen.N" or "<file name>.N" with "N" being the respective partition number, and unless overridden by the -pscreen flag (see above).
- -sf <suffix> or -suffix <suffix>
- Use variants of various styles in the input, if they exist. This is
achieved by transparently trying to convert a style named <my/style>
into <my/style/suffix> if that latter style exists, but otherwise
fall back to the former. The most useful suffixes are "gpu",
"intel", "kk", "omp", "opt", or
"hybrid". These refer to styles from optional packages that
LAMMPS can be built with. The hybrid suffix is special, as it enables,
having two suffixes tried (e.g. first "intel" and then
"omp") and thus requires two arguments. Along with the
"-package" command-line switch, this is a convenient mechanism
for invoking styles from accelerator packages and setting their options
without having to edit an input script.
See https://lammps.sandia.gov/doc/Run_options.html for additional details and discussions on command-line options.
LAMMPS executes by reading commands from a input script (text file), one line at a time. When the input script ends, LAMMPS exits. Each command causes LAMMPS to take some action. It may set or change an internal, read and parse a file, or run a simulation. Most commands have default settings, which means you only need to use the command if you wish to change the default.
The ordering of commands in an input script is usually not very important unless a command like "run" is encountered, which starts some calculation using the current internal state. Also, if a "pair_style" or "bond_style" other similar style command is issued that has a different name from what was previously active, it will replace the previous style and wipe out all corresponding "pair_coeff" or "bond_coeff" or equivalent settings. Some commands are only valid when they follow other commands. For example you cannot set the temperature of a group of atoms until atoms have been defined and a group command is used to define which atoms belong to the group of a given name. Sometimes command B will use values that can be set by command A. This means command A must precede command B in the input to have the desired effect. Some commands must be issued before the simulation box is defined and others can only be issued after. Many input script errors are detected by LAMMPS and an ERROR or WARNING message is printed. The documentation for each command lists restrictions on how the command can be used, and the chapter on errors in the LAMMPS manual gives some additional information about error messages, if possible.
© 2003--2020 Sandia Corporation
This package is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License version 2 as published by the Free Software Foundation.
This package is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
On Debian systems, the complete text of the GNU General Public License can be found in `/usr/share/common-licenses/GPL-2'.
|24 December 2020||2020-12-24|