table of contents
IPMCTL-SHOW-ERROR-LOG(1) | ipmctl | IPMCTL-SHOW-ERROR-LOG(1) |
NAME¶
ipmctl-show-error-log - Shows thermal or media errors on the specified PMem modules
SYNOPSIS¶
ipmctl show [OPTIONS] -error (Thermal|Media) [TARGETS] [PROPERTIES]
DESCRIPTION¶
Shows thermal or media errors on the specified PMem modules.
OPTIONS¶
-a, -all
-h, -help
-ddrt
-smbus
Note
The -ddrt and -smbus options are mutually exclusive and may not be used together.
-lpmb
-spmb
Note
The -lpmb and -spmb options are mutually exclusive and may not be used together.
-o (text|nvmxml), -output (text|nvmxml)
TARGETS¶
-dimm [DimmIDs]
PROPERTIES¶
SequenceNumber
Level
Count
EXAMPLES¶
Show all high thermal error log entries
ipmctl show -error Thermal Level=High
Show all low media error log entries
ipmctl show -error Media Level=Low
LIMITATIONS¶
To successfully execute this command, the specified PMem modules must be manageable by the host software. In addition, for PMem modules with firmware version 2.3 and above, errors due to AIT operations are no longer exposed.
RETURN DATA¶
Prints errors of the specified type for the specified PMem modules. If no errors are found, the following message will be printed:
No errors found on PMem module (DimmID)
SAMPLE OUTPUT¶
DimmID | System Timestamp | Error Type =============================================================
0x0001 | 01/01/1970 00:00:20 | 0x04 - Locked/Illegal Access
0x0001 | 01/01/1970 00:00:21 | 0x04 - Locked/Illegal Access Show error executed successfully
Media Error occurred on Dimm (DimmID): System Timestamp : 1527266471 DPA : 0x000014c0 PDA : 0x00000600 Range : 4B Error Type : 4 - Locked/Illegal Access Error Flags : DPA Valid Transaction Type : 11 - CSR Write Sequence Number : 2
2021-02-17 | ipmctl |