dump2dcm - Convert ASCII dump to DICOM file
dump2dcm [options] dumpfile-in dcmfile-out
The dump2dcm utility converts an ASCII dump file to a DICOM file. The dump file has the same format as the output of dcmdump. Thus it is possible to capture the output of dcmdump into a file, modify some attributes and create a new DICOM file.
dumpfile-in dump input filename dcmfile-out DICOM output filename
print this help text and exit
print version information and exit
print expanded command line arguments
quiet mode, print no warnings and errors
verbose mode, print processing details
debug mode, print debug information
-ll --log-level [l]evel: string constant
(fatal, error, warn, info, debug, trace)
use level l for the logger
-lc --log-config [f]ilename: string
use config file f for the logger
input file format:
read meta information if present (default)
ignore file meta information file contents byte ordering:
read OW data with little endian (default)
read OW data from file with big endian other input options:
+l --line [m]ax-length: integer
maximum line length m (default: 4096)
generate new Study/Series/SOP Instance UID
do not overwrite existing UIDs (default)
overwrite existing UIDs
output file format:
write file format (default)
write data set without file meta information
update particular file meta information output transfer syntax:
write with same TS as input (default)
write with explicit VR little endian
write with explicit VR big endian TS
write with implicit VR little endian TS
write with deflated explicit VR little endian TS error handling:
do not write if dump is damaged (default)
attempt to write even if dump is damaged post-1993 value representations:
enable support for new VRs (UN/UT) (default)
disable support for new VRs, convert to OB group length encoding:
recalculate group lengths if present (default)
always write with group length elements
always write without group length elements length encoding in sequences and items:
write with explicit lengths (default)
write with undefined lengths data set trailing padding (not with --write-dataset):
do not change padding (default if not --write-dataset)
no padding (implicit if --write-dataset)
+p --padding-create [f]ile-pad [i]tem-pad: integer
align file on multiple of f bytes
and items on multiple of i bytes deflate compression level (only with --write-xfer-deflated):
+cl --compression-level [l]evel: integer (default: 6)
0=uncompressed, 1=fastest, 9=best compression
Dump File Description¶
The input file can be an output of dcmdump (default indented format only). One element (tag, VR, value) must be written into one line separated by arbitrary spaces or tab characters. A '#' begins a comment that ends at the line end. Empty lines are allowed.
The individual parts of a line have the following syntax:
with gggg and eeee are 4 character hexadecimal values
representing group and element tag. Spaces and tabs can be
anywhere in a tag specification. VR: Value Representation must be written as 2 characters as in
Part 6 of the DICOM standard. No spaces or tabs are allowed
between the two characters. If the VR can be determined from
the tag, this part of a line is optional. Value: There are several rules for writing values:
1. US, SS, SL, UL, FD, FL, OD, OF and OL are written as decimal
strings that can be read by scanf().
2. AT is written as '(gggg,eeee)' with additional spaces
stripped off automatically and gggg and eeee being decimal
strings that can be read by scanf().
3. OB and OW values are written as byte or word hexadecimal
values separated by '\' character. Alternatively, OB or OW
values can be read from a separate file by writing the
filename prefixed by a '=' character (e.g. '=largepix.dat').
The contents of the file will be read as is. By default, OW
data is expected to be little endian ordered and will be
swapped if necessary. No checks will be made to ensure that
the amount of data is reasonable in terms of other attributes
such as Rows or Columns.
In case of compressed pixel data, the line should start with
'(7fe0,0010) OB (PixelSequence' in order to distinguish from
uncompressed pixel data.
4. UI is written as '=Name' in data dictionary or as unique
identifier string (see 6.), e.g. '[1.2.840.....]'.
5. Strings without () <>  spaces, tabs and # can be written
6. Other strings must be surrounded by '[' and ']'. No bracket
structure is passed. The value ends at the last ']' in the
line. Anything after the ']' is interpreted as comment.
7. '(' and '<' are interpreted special and may not be used when
writing an input file by hand as beginning characters of a
string. Multiple Value are separated by '\'. The lines
need not be sorted into ascending tag order. References in
DICOM Directories are not supported. Semantic errors are
(0008,0020) DA  # 8, 1 StudyDate
(0008,0016) UI =MRImageStorage # 26, 1 SOPClassUID
(0002,0012) UI [1.2.276.0.7230010.100.1.1]
(0020,0032) DS [0.0\0.0] # 8, 2 ImagePositionPatient
(0028,0009) AT (3004,000c) # 4, 1 FrameIncrementPointer
(0028,0010) US 256 # 4, 1 Rows
(0002,0001) OB 01\00
Please note that dump2dcm currently does not fully support DICOMDIR files. Specifically, the value of the various offset data elements is not updated automatically by this tool.
The level of logging output of the various command line tools and underlying libraries can be specified by the user. By default, only errors and warnings are written to the standard error stream. Using option --verbose also informational messages like processing details are reported. Option --debug can be used to get more details on the internal activity, e.g. for debugging purposes. Other logging levels can be selected using option --log-level. In --quiet mode only fatal errors are reported. In such very severe error events, the application will usually terminate. For more details on the different logging levels, see documentation of module 'oflog'.
In case the logging output should be written to file (optionally with logfile rotation), to syslog (Unix) or the event log (Windows) option --log-config can be used. This configuration file also allows for directing only certain messages to a particular output stream and for filtering certain messages based on the module or application where they are generated. An example configuration file is provided in <etcdir>/logger.cfg.
All command line tools use the following notation for parameters: square brackets enclose optional values (0-1), three trailing dots indicate that multiple values are allowed (1-n), a combination of both means 0 to n values.
Command line options are distinguished from parameters by a leading '+' or '-' sign, respectively. Usually, order and position of command line options are arbitrary (i.e. they can appear anywhere). However, if options are mutually exclusive the rightmost appearance is used. This behavior conforms to the standard evaluation rules of common Unix shells.
In addition, one or more command files can be specified using an '@' sign as a prefix to the filename (e.g. @command.txt). Such a command argument is replaced by the content of the corresponding text file (multiple whitespaces are treated as a single separator unless they appear between two quotation marks) prior to any further evaluation. Please note that a command file cannot contain another command file. This simple but effective approach allows one to summarize common combinations of options/parameters and avoids longish and confusing command lines (an example is provided in file <datadir>/dumppat.txt).
The dump2dcm utility will attempt to load DICOM data dictionaries specified in the DCMDICTPATH environment variable. By default, i.e. if the DCMDICTPATH environment variable is not set, the file <datadir>/dicom.dic will be loaded unless the dictionary is built into the application (default for Windows).
The default behavior should be preferred and the DCMDICTPATH environment variable only used when alternative data dictionaries are required. The DCMDICTPATH environment variable has the same format as the Unix shell PATH variable in that a colon (':') separates entries. On Windows systems, a semicolon (';') is used as a separator. The data dictionary code will attempt to load each file specified in the DCMDICTPATH environment variable. It is an error if no data dictionary can be loaded.
Copyright (C) 1996-2016 by OFFIS e.V., Escherweg 2, 26121 Oldenburg, Germany.
|Mon Oct 28 2019||Version 3.6.5|