- bullseye 247.3-7+deb11u1
- bullseye-backports 252.5-2~bpo11+1
- testing 252.6-1
- unstable 252.6-1
- experimental 253-1
systemd.link - Network device configuration
A plain ini-style text file that encodes configuration for matching network devices, used by systemd-udevd(8) and in particular its net_setup_link builtin. See systemd.syntax(7) for a general description of the syntax.
The .link files are read from the files located in the system network directory /lib/systemd/network and /usr/local/lib/systemd/network, the volatile runtime network directory /run/systemd/network, and the local administration network directory /etc/systemd/network. All configuration files are collectively sorted and processed in alphanumeric order, regardless of the directories in which they live. However, files with identical filenames replace each other. It is recommended that each filename is prefixed with a number (e.g. 10-eth0.link). Otherwise, the default .link files or those generated by systemd-network-generator.service(8) may take precedence over user configured files. Files in /etc/ have the highest priority, files in /run/ take precedence over files with the same name in /lib/. This can be used to override a system-supplied link file with a local file if needed. As a special case, an empty file (file size 0) or symlink with the same name pointing to /dev/null disables the configuration file entirely (it is "masked").
Along with the link file foo.link, a "drop-in" directory foo.link.d/ may exist. All files with the suffix ".conf" from this directory will be merged in the alphanumeric order and parsed after the main file itself has been parsed. This is useful to alter or add configuration settings, without having to modify the main configuration file. Each drop-in file must have appropriate section headers.
In addition to /etc/systemd/network, drop-in ".d" directories can be placed in /lib/systemd/network or /run/systemd/network directories. Drop-in files in /etc/ take precedence over those in /run/ which in turn take precedence over those in /lib/. Drop-in files under any of these directories take precedence over the main link file wherever located.
The link file contains a [Match] section, which determines if a given link file may be applied to a given device, as well as a [Link] section specifying how the device should be configured. The first (in lexical order) of the link files that matches a given device is applied. Note that a default file 99-default.link is shipped by the system. Any user-supplied .link should hence have a lexically earlier name to be considered at all.
See udevadm(8) for diagnosing problems with .link files.
[MATCH] SECTION OPTIONS¶
A link file is said to match an interface if all matches specified by the [Match] section are satisfied. When a link file does not contain valid settings in [Match] section, then the file will match all interfaces and systemd-udevd warns about that. Hint: to avoid the warning and to make it clear that all interfaces shall be matched, add the following:
The first (in alphanumeric order) of the link files that matches a given interface is applied, all later files are ignored, even if they match as well. The following keys are accepted:
IPv4 address format
IPv6 address format
The total length of each MAC address must be 4 (for IPv4 tunnel), 6 (for Ethernet), 16 (for IPv6 tunnel), or 20 (for InfiniBand). This option may appear more than once, in which case the lists are merged. If the empty string is assigned to this option, the list of hardware addresses defined prior to this is reset. Defaults to unset.
Example: if a .link file has the following:
Property=ID_MODEL_ID=9999 "ID_VENDOR_FROM_DATABASE=vendor name" "KEY=with \"quotation\""
then, the .link file matches only when an interface has all the above three properties.
[LINK] SECTION OPTIONS¶
The [Link] section accepts the following keys:
An empty string assignment is equivalent to setting "none".
Note that specifying a name that the kernel might use for another interface (for example "eth0") is dangerous because the name assignment done by udev will race with the assignment done by the kernel, and only one interface may use the name. Depending on the order of operations, either udev or the kernel will win, making the naming unpredictable. It is best to use some different prefix, for example "internal0"/"external0" or "lan0"/"lan1"/"lan3".
Interface names must have a minimum length of 1 character and a maximum length of 15 characters, and may contain any 7bit ASCII character, with the exception of control characters, ":", "/" and "%". While "." is an allowed character, it's recommended to avoid it when naming interfaces as various tools (such as resolvconf(1)) use it as separator character. Also, fully numeric interface names are not allowed (in order to avoid ambiguity with interface specification by numeric indexes), as are the special strings ".", "..", "all" and "default".
Alternative interface names may be used to identify interfaces in various tools. In contrast to the primary name (as configured with Name= above) there may be multiple alternative names referring to the same interface. Alternative names may have a maximum length of 127 characters, in contrast to the 15 allowed for the primary interface name, but otherwise are subject to the same naming constraints.
Note that if autonegotiation is enabled, speed and duplex settings are read-only. If autonegotiation is disabled, speed and duplex settings are writable if the driver supports multiple link modes.
Defaults to unset, and the device's default will be used. This setting can be specified multiple times. If an empty string is assigned, then the all previous assignments are cleared.
Table 1. Supported advertise values
|Advertise||Speed (Mbps)||Duplex Mode|
By default this is unset, i.e. all possible modes will be
advertised. This option may be specified more than once, in which case all
specified speeds and modes are advertised. If the empty string is assigned
to this option, the list is reset, and all prior assignments have no effect.
RxChannels=, TxChannels=, OtherChannels=, CombinedChannels=
RxBufferSize=, RxMiniBufferSize=, RxJumboBufferSize=, TxBufferSize=
RxCoalesceSec=, RxCoalesceIrqSec=, RxCoalesceLowSec=, RxCoalesceHighSec=, TxCoalesceSec=, TxCoalesceIrqSec=, TxCoalesceLowSec=, TxCoalesceHighSec=
RxMaxCoalescedFrames=, RxMaxCoalescedIrqFrames=, RxMaxCoalescedLowFrames=, RxMaxCoalescedHighFrames=, TxMaxCoalescedFrames=, TxMaxCoalescedIrqFrames=, TxMaxCoalescedLowFrames=, TxMaxCoalescedHighFrames=
[SR-IOV] SECTION OPTIONS¶
The [SR-IOV] section accepts the following keys. Specify several [SR-IOV] sections to configure several SR-IOVs. SR-IOV provides the ability to partition a single physical PCI resource into virtual PCI functions which can then be injected into a VM. In the case of network VFs, SR-IOV improves north-south network performance (that is, traffic with endpoints outside the host machine) by allowing traffic to bypass the host machine’s network stack.
Example 1. /lib/systemd/network/99-default.link
The link file 99-default.link that is shipped with systemd defines the default naming policy for links.
[Link] NamePolicy=kernel database onboard slot path MACAddressPolicy=persistent
Example 2. /etc/systemd/network/10-dmz.link
This example assigns the fixed name "dmz0" to the interface with the MAC address 00:a0:de:63:7a:e6:
[Match] MACAddress=00:a0:de:63:7a:e6 [Link] Name=dmz0
NamePolicy= is not set, so Name= takes effect. We use the "10-" prefix to order this file early in the list. Note that it needs to be before "99-link", i.e. it needs a numerical prefix, to have any effect at all.
Example 3. Debugging NamePolicy= assignments
$ sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/hub0 ... Parsed configuration file /lib/systemd/network/99-default.link Parsed configuration file /etc/systemd/network/10-eth0.link ID_NET_DRIVER=cdc_ether Config file /etc/systemd/network/10-eth0.link applies to device hub0 link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. hub0: Device has name_assign_type=4 Using default interface naming scheme 'v240'. hub0: Policies didn't yield a name, using specified Name=hub0. ID_NET_LINK_FILE=/etc/systemd/network/10-eth0.link ID_NET_NAME=hub0 ...
Explicit Name= configuration wins in this case.
sudo SYSTEMD_LOG_LEVEL=debug udevadm test-builtin net_setup_link /sys/class/net/enp0s31f6 ... Parsed configuration file /lib/systemd/network/99-default.link Parsed configuration file /etc/systemd/network/10-eth0.link Created link configuration context. ID_NET_DRIVER=e1000e Config file /lib/systemd/network/99-default.link applies to device enp0s31f6 link_config: autonegotiation is unset or enabled, the speed and duplex are not writable. enp0s31f6: Device has name_assign_type=4 Using default interface naming scheme 'v240'. enp0s31f6: Policy *keep*: keeping existing userspace name enp0s31f6: Device has addr_assign_type=0 enp0s31f6: MAC on the device already matches policy *persistent* ID_NET_LINK_FILE=/lib/systemd/network/99-default.link ...
In this case, the interface was already renamed, so the keep policy specified as the first option in 99-default.link means that the existing name is preserved. If keep was removed, or if were in boot before the renaming has happened, we might get the following instead:
enp0s31f6: Policy *path* yields "enp0s31f6". enp0s31f6: Device has addr_assign_type=0 enp0s31f6: MAC on the device already matches policy *persistent* ID_NET_LINK_FILE=/lib/systemd/network/99-default.link ID_NET_NAME=enp0s31f6 ...
Please note that the details of output are subject to change.
Example 4. /etc/systemd/network/10-internet.link
This example assigns the fixed name "internet0" to the interface with the device path "pci-0000:00:1a.0-*":
[Match] Path=pci-0000:00:1a.0-* [Link] Name=internet0
Example 5. /etc/systemd/network/25-wireless.link
Here's an overly complex example that shows the use of a large number of [Match] and [Link] settings.
[Match] MACAddress=12:34:56:78:9a:bc Driver=brcmsmac Path=pci-0000:02:00.0-* Type=wlan Virtualization=no Host=my-laptop Architecture=x86-64 [Link] Name=wireless0 MTUBytes=1450 BitsPerSecond=10M WakeOnLan=magic MACAddress=cb:a9:87:65:43:21
systemd-udevd.service(8), udevadm(8), systemd.netdev(5), systemd.network(5), systemd-network-generator.service(8)
- System and Service Credentials