table of contents
MUSE_SCIPOST_MAKE_CUBE(7) | muse recipes | MUSE_SCIPOST_MAKE_CUBE(7) |
NAME¶
muse_scipost_make_cube - Make a MUSE cube from a MUSE pixel table.
SYNOPSIS¶
esorex muse_scipost_make_cube [OPTIONS] FILE.sof
DESCRIPTION¶
This recipe takes a pixel table and resamples it to either a FITS cube or a Euro3D table and optionally to a stacked spectrum. This is a part of the muse_scipost recipe.
OPTIONS¶
- --lambdamin <float>
- Cut off the data below this wavelength after loading the pixel table(s). (float; default: 4000.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.lambdamin [default = 4000.0].
- --lambdamax <float>
- Cut off the data above this wavelength after loading the pixel table(s). (float; default: 10000.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.lambdamax [default = 10000.0].
- --resample <str>
- The resampling technique to use for the final output cube. (str; default: ´drizzle´). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.resample [default = drizzle].
- --dx <float>
- Horizontal step size for resampling (in arcsec or pixel). The following defaults are taken when this value is set to 0.0: 0.2´´ for WFM, 0.025´´ for NFM, 1.0 if data is in pixel units. (float; default: 0.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.dx [default = 0.0].
- --dy <float>
- Vertical step size for resampling (in arcsec or pixel). The following defaults are taken when this value is set to 0.0: 0.2´´ for WFM, 0.025´´ for NFM, 1.0 if data is in pixel units. (float; default: 0.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.dy [default = 0.0].
- --dlambda <float>
- Wavelength step size (in Angstrom). Natural instrument sampling is used, if this is 0.0 (float; default: 0.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.dlambda [default = 0.0].
- --crtype <str>
- Type of statistics used for detection of cosmic rays during final resampling. "iraf" uses the variance information, "mean" uses standard (mean/stdev) statistics, "median" uses median and the median median of the absolute median deviation. (str; default: ´median´). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.crtype [default = median].
- --crsigma <float>
- Sigma rejection factor to use for cosmic ray rejection during final resampling. A zero or negative value switches cosmic ray rejection off. (float; default: 15.0). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.crsigma [default = 15.0].
- --rc <float>
- Critical radius for the "renka" resampling method. (float; default: 1.25). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.rc [default = 1.25].
- --pixfrac <str>
- Pixel down-scaling factor for the "drizzle" resampling method. Up to three, comma-separated, floating-point values can be given. If only one value is given, it applies to all dimensions, two values are interpreted as spatial and spectral direction, respectively, while three are taken as horizontal, vertical, and spectral. (str; default: ´0.8,0.8´). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.pixfrac [default = 0.8,0.8].
- --ld <int>
- Number of adjacent pixels to take into account during resampling in all three directions (loop distance); this affects all resampling methods except "nearest". (int; default: 1). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.ld [default = 1].
- --format <str>
- Type of output file format, "Cube" is a standard FITS cube with NAXIS=3 and multiple extensions (for data and variance). The extended "x" formats include the reconstructed image(s) in FITS image extensions within the same file. (str; default: ´Cube´). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.format [default = Cube].
- --stacked <bool>
- If true, write an additional output file in form of a 2D stacked image (x direction is pseudo-spatial, y direction is wavelength). (bool; default: False). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.stacked [default = False].
- --filter <str>
- The filter name(s) to be used for the output field-of-view image. Each name has to correspond to an EXTNAME in an extension of the FILTER_LIST file. If an unsupported filter name is given, creation of the respective image is omitted. If multiple filter names are given, they have to be comma separated. (str; default: ´white´). The full name of this option for the EsoRex configuration file is muse.muse_scipost_make_cube.filter [default = white].
Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.
SEE ALSO¶
The full documentation for the muse pipeline can be downloaded as a PDF file using the following URL:
An overview over the existing ESO pipelines can be found on the web page https://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See https://packages.python.org/python-cpl/index.html for further information.
The other recipes of the muse pipeline are muse_ampl(7), muse_astrometry(7), muse_bias(7), muse_create_sky(7), muse_dark(7), muse_exp_align(7), muse_exp_combine(7), muse_flat(7), muse_geometry(7), muse_illum(7), muse_lingain(7), muse_lsf(7), muse_qi_mask(7), muse_scibasic(7), muse_scipost(7), muse_scipost_apply_astrometry(7), muse_scipost_calibrate_flux(7), muse_scipost_combine_pixtables(7), muse_scipost_correct_dar(7), muse_scipost_correct_rv(7), muse_scipost_raman(7), muse_scipost_subtract_sky(7), muse_scipost_subtract_sky_simple(7), muse_standard(7), muse_twilight(7), muse_wavecal(7)
VERSION¶
muse_scipost_make_cube 2.8.7
AUTHOR¶
Ole Streicher <https://support.eso.org>
BUG REPORTS¶
Please report any problems to https://support.eso.org. Alternatively, you may send a report to the ESO User Support Department <usd-help@eso.org>.
LICENSE¶
This file is part of the MUSE Instrument Pipeline Copyright (C) 2005, 2019 European Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02111-1307 USA
2.8.7 | muse_scipost_make_cube |