Do not query the user for authentication for privileged operations.

When showing session/user/seat properties, limit display to certain properties as specified as argument. If not specified, all set properties are shown. The argument should be a property name, such as "Sessions". If specified more than once, all properties with the specified names are shown.

When showing session/user/seat properties, only print the value, and skip the property name and "=".

When showing session/user/seat properties, show all properties regardless of whether they are set or not.

Do not ellipsize process tree entries.

When used with kill-session, choose which processes to kill. Must be one of leader, or all to select whether to kill only the leader process of the session or all processes of the session. If omitted, defaults to all.

When used with kill-session or kill-user, choose which signal to send to selected processes. Must be one of the well known signal specifiers, such as SIGTERM, SIGINT or SIGSTOP. If omitted, defaults to SIGTERM.

The special value "help" will list the known values and the program will exit immediately, and the special value "list" will list known values along with the numerical signal numbers and the program will exit immediately.

When used with user-status and session-status, controls the number of journal lines to show, counting from the most recent ones. Takes a positive integer argument. Defaults to 10.

When used with user-status and session-status, controls the formatting of the journal entries that are shown. For the available choices, see journalctl(1). Defaults to "short".

Execute the operation remotely. Specify a hostname, or a username and hostname separated by "@", to connect to. The hostname may optionally be suffixed by a port ssh is listening on, separated by ":", and then a container name, separated by "/", which connects directly to a specific container on the specified host. This will use SSH to talk to the remote machine manager instance. Container names may be enumerated with machinectl -H HOST. Put IPv6 addresses in brackets.

Execute operation on a local container. Specify a container name to connect to, optionally prefixed by a user name to connect as and a separating "@" character. If the special string ".host" is used in place of the container name, a connection to the local system is made (which is useful to connect to a specific user's user bus: "--user --machine=lennart@.host"). If the "@" syntax is not used, the connection is made as root user. If the "@" syntax is used either the left hand side or the right hand side may be omitted (but not both) in which case the local user name and ".host" are implied.

Do not pipe output into a pager.

Do not print the legend, i.e. column headers and the footer with hints.

Print a short help text and exit.

Print a short version string and exit.

$ loginctl user-status
fatima (1005)


           Since: Sat 2016-04-09 14:23:31 EDT; 54min ago


           State: active


        Sessions: 5 *3


            Unit: user-1005.slice


                  ├─user@1005.service


                    ...


                  ├─session-3.scope


                    ...


                  └─session-5.scope


                    ├─3473 login -- fatima


                    └─3515 -zsh
Apr 09 14:40:30 laptop login[2325]: pam_unix(login:session):


                       session opened for user fatima by LOGIN(uid=0)
Apr 09 14:40:30 laptop login[2325]: LOGIN ON tty3 BY fatima

The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Either one of (in order of decreasing importance) emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range 0...7. See syslog(3) for more information.

A boolean. If true, messages written to the tty will be colored according to priority.

This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own.

A boolean. If true, console log messages will be prefixed with a timestamp.

This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own.

A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates.

Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

A boolean. If true, messages will be prefixed with the current numerical thread ID (TID).

Note that the this information is attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

The destination for log messages. One of console (log to the attached tty), console-prefixed (log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log to the journal), journal-or-kmsg (log to the journal if available, and to kmsg otherwise), auto (determine the appropriate log target automatically, the default), null (disable log output).

Whether to ratelimit kmsg or not. Takes a boolean. Defaults to "true". If disabled, systemd will not ratelimit messages written to kmsg.

Pager to use when --no-pager is not given. $SYSTEMD_PAGER is used if set; otherwise $PAGER is used. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations is tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered, no pager is invoked. Setting those environment variables to an empty string or the value "cat" is equivalent to passing --no-pager.

Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER and $PAGER can only be used to disable the pager (with "cat" or ""), and are otherwise ignored.

Override the options passed to less (by default "FRSXMK").

Users might want to change two options in particular:

K

X

Note that setting the regular $LESS environment variable has no effect for less invocations by systemd tools.

See less(1) for more discussion.

Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible).

Note that setting the regular $LESSCHARSET environment variable has no effect for less invocations by systemd tools.

Common pager commands like less(1), in addition to "paging", i.e. scrolling through the output, support opening of or writing to other files and running arbitrary shell commands. When commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), the pager becomes a security boundary. Care must be taken that only programs with strictly limited functionality are used as pagers, and unintended interactive features like opening or creation of new files or starting of subprocesses are not allowed. "Secure mode" for the pager may be enabled as described below, if the pager supports that (most pagers are not written in a way that takes this into consideration). It is recommended to either explicitly enable "secure mode" or to completely disable the pager using --no-pager or PAGER=cat when allowing untrusted users to execute commands with elevated privileges.

This option takes a boolean argument. When set to true, the "secure mode" of the pager is enabled. In "secure mode", LESSSECURE=1 will be set when invoking the pager, which instructs the pager to disable commands that open or create new files or start new subprocesses. Currently only less(1) is known to understand this variable and implement "secure mode".

When set to false, no limitation is placed on the pager. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment may allow the user to invoke arbitrary commands.

When $SYSTEMD_PAGERSECURE is not set, systemd tools attempt to automatically figure out if "secure mode" should be enabled and whether the pager supports it. "Secure mode" is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3), or when running under sudo(8) or similar tools ($SUDO_UID is set [1]). In those cases, SYSTEMD_PAGERSECURE=1 will be set and pagers which are not known to implement "secure mode" will not be used at all. Note that this autodetection only covers the most common mechanisms to elevate privileges and is intended as convenience. It is recommended to explicitly set $SYSTEMD_PAGERSECURE or disable the pager.

Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, other than to disable the pager, $SYSTEMD_PAGERSECURE must be set too.

Takes a boolean argument. When true, systemd and related utilities will use colors in their output, otherwise the output will be monochrome. Additionally, the variable can take one of the following special values: "16", "256" to restrict the use of colors to the base 16 or 256 ANSI colors, respectively. This can be specified to override the automatic decision based on $TERM and what the console is connected to.

The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.