table of contents
foo2qpdl(1) | General Commands Manual | foo2qpdl(1) |
NAME¶
foo2qpdl - Convert Ghostscript pbmraw or bitcmyk format into a QPDL printer stream
SYNOPSIS¶
foo2qpdl [options] <pbmraw-file >qpdl-file
foo2qpdl [options] <bitcmyk-file >qpdl-file
foo2qpdl [options] <pksmraw-file >qpdl-file
DESCRIPTION¶
foo2qpdl converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color QPDL streams, for driving the Samsung CLP-300, CLX-2160, CLP-600, CLX-3160, CLP-610 CLP-620, CLP-360, CLP-365, and the Xerox Phaser 6110 QPDL printers.
COMMAND LINE OPTIONS¶
Normal Options¶
These are the options used to select the parameters of a print job that are usually controlled on a per job basis.
- -c
- Force color mode if autodetect doesn't work.
- -d duplex
- Duplex code to send to printer [1].
1 off 2 long edge 3 short edge - -g xpixxypix
- Set page dimensions in pixels [10200x6600].
- -m media
- Media code to send to printer [0].
Media QPDL plain 0 thick 1 thin 2 bond 3 color 4 card 5 labels 6 envelope 7 preprinted 8 cotton 9 recycled 10 transparency 11 archive 12 - -p paper
- Paper code to send to printer [0].
0 letter 1 legal 2 A4 3 executive 6 env #10 7 env Monarch 8 env C5 9 env DL 11 B5jis 12 B5iso 16 A5 17 A6 23 env C6 24 folio 25 env 6.75 26 env #9 28 oficio 21 custom - -n copies
- Number of copies [1].
- -r xresxyres
- Set device resolution in pixels/inch [1200x600].
- -s source
- Source (InputSlot) code to send to printer [255].
1 auto 2 manual 3 multi 4 tray1 - -t
- Draft mode. Every other pixel is white.
- -J filename
- Filename string to send to printer.
- -U username
- Username string to send to printer.
Printer Tweaking Options¶
These are the options used to customize the operation of foo2qpdl for a particular printer.
- -a b,c,s,cr,mg,yb
- Color Adjust: brightness, contrast, saturation, cyan-red balance, magenta-green balance, and yellow-blue balance from 0 to 100. The default is 50,50,50,50,50,50. This only works when the -z3 (e.g. CLP-365) model is set!
- -u xoffxyoff
- Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
- -l xoffxyoff
- Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
- -L mask
- Send logical clipping amounts implied by -u/-l in the QPDL stream [3].
0 don't send any logical clipping amounts 1 only send Y clipping amount 2 only send X clipping amount 3 send both X and Y clipping amounts - -A
- AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
- -B
- BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
- -z model
- Printer model. Model 0 is the default.
model Description 0 CLP-300, CLX-2160, CLX-3160 1 CLP-600 2 CLP-310, CLP-315, CLP-610, CLX-3175 3 CLP-620, CLP-360, CLP-365
Debugging Options¶
These options are used for debugging foo2qpdl.
EXAMPLES¶
Create a black and white QPDL stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -r1200x600 -sDEVICE=pbmraw
-sOutputFile=- - < testpage.ps | foo2qpdl -r1200x600 -g10200x6600 -p0 >testpage.zm
Create a color QPDL stream:
gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE
-sPAPERSIZE=letter -g10200x6600 -r1200x600 -sDEVICE=bitcmyk
-sOutputFile=- - < testpage.ps | foo2qpdl -r1200x600 -g10200x6600 -p0 >testpage.zc
FILES¶
/usr/bin/foo2qpdl
SEE ALSO¶
AUTHOR¶
Rick Richardson <rick.richardson@comcast.com>
http://foo2qpdl.rkkda.com/
Sat Apr 27 07:32:30 2024 | foo2qpdl 0.0 |