NAME¶
lparstat - Reports logical partition ( LPAR ) related information and
statistics.
SYNOPSIS¶
/usr/sbin/lparstat [ -i ] [ interval [ count ] ]
DESCRIPTION¶
The
lparstat command provides a report of LPAR related information and
utilization statistics. This command provides a display of current LPAR
related parameters and Hypervisor information, as well as utilization
statistics for the LPAR.
The
lparstat command with no options will generate a single report
containing utilization statistics related to the LPAR since boot time.
The following information is displayed in the system configuration row:
- type
- Partition Type. Can be either dedicated or shared.
- mode
- Indicates whether the partition processor capacity is capped or uncapped
allowing it to consume idle cycles from the shared pool. Dedicated LPAR is
capped or donating.
- smt
- Indicates whether simultaneous multi-threading is enabled or disabled in
the partition. If there are two SMT threads, the row is displayed as
"on." However, if there are more than two SMT threads, the
number of SMT threads is displayed.
- lcpu
- Number of online logical processors.
- mem
- Online Memory Capacity.
- cpus
- Number of online physical processors in the pool.
- ent
- Entitled processing capacity in processor units. This information is
displayed only if the partition type is shared.
The following information is displayed in the utilization row:
- %user
- Shows the percentage of the entitled processing capacity used while
executing at the user level (application). For dedicated partitions, the
entitled processing capacity is the number of physical processors. For
uncapped partitions with a current physical processor consumption above
their entitled capacity, the percentage becomes relative to the number of
physical processor consumed (physc).
- %sys
- Shows the percentage of the entitled processing capacity used while
executing at the system level (kernel). For dedicated partitions, the
entitled processing capacity is the number of physical processors. For
uncapped partitions with a current physical processor consumption above
their entitled capacity, the percentage becomes relative to the number of
physical processor consumed (physc).
- %wait
- Shows the percentage of the entitled processing capacity unused while the
partition was idle and had outstanding disk I/O requests. For dedicated
partitions, the entitled processing capacity is the number of physical
processors. For uncapped partitions with a current physical processor
consumption above their entitled capacity, the percentage becomes relative
to the number of physical processor consumed (physc).
- %idle
- Shows the percentage of the entitled processing capacity unused while the
partition was idle and did not have any outstanding disk I/O request. For
dedicated partitions, the entitled processing capacity is the number of
physical processors. For uncapped partitions with a current physical
processor consumption above their entitled capacity, the percentage
becomes relative to the number of physical processor consumed
(physc).
The following statistics are displayed when the partition type is shared or
dedicated-donating:
- physc
- Shows the number of physical processors consumed.
- vcsw
- Shows the number of virtual context switches that are virtual processor
hardware preemptions.
The following statistics are displayed only when the partition type is shared:
- %entc
- Shows the percentage of the entitled capacity consumed. Because the time
base over which this data is computed can vary, the entitled capacity
percentage can sometimes exceed 100%. This excess is noticeable only with
small sampling intervals.
- lbusy
- Shows the percentage of logical processor(s) utilization that occurred
while executing at the user and system level.
- phint
- Shows the number of phantom (targeted to another shared partition in this
pool) interruptions received.
OPTIONS¶
- -i
- Lists details on the LPAR configuration. The various details displayed by
the -i option are listed below:
- Node Name
- Description
- Partition Name
- Logical partition name as assigned at the HMC.
- Partition Number
- Number of this Logical Partition.
- Type
- Indicates whether the LPAR is using dedicated or shared CPU resource and
if the SMT is turned ON. The Type is displayed in the format [Shared |
Dedicated] [ -SMT ] [ -# ] The following list explains the different Type
formats:
- Shared - Indicates that the LPAR is running in the Shared processor
mode.
- Dedicated - Indicates that the LPAR is running in the dedicated processor
mode.
- SMT[-#] - Indicates that the LPAR has SMT mode turned ON and the number of
SMT threads is 2. If the number of threads is greater than 2, then the
number of threads is also displayed.
- Mode
- Indicates whether the LPAR processor capacity is capped, or if it is
uncapped and allowed to consume idle cycles from the shared pool.
Dedicated LPAR is capped or donating.
- Entitled Capacity
-
The number of processing units this LPAR is entitled to receive.
- Partition Group-ID
-
LPAR group that this LPAR is a member of.
- Shared Pool ID
-
Identifier of Shared Pool of Physical processors that this LPAR is a
member.
- Online Virtual CPUs
- Number of CPUs (virtual engines) currently online.
- Maximum Virtual CPUs
- Maximum possible number of CPUs (virtual engines).
- Minimum Virtual CPUs
-
Minimum number of virtual CPUs this LPAR was defined to ever have.
- Online Memory
- Amount of memory currently online.
- Minimum Memory
-
Minimum memory this LPAR was defined to ever have.
- Variable Capacity Weight
-
The priority weight assigned to this LPAR which controls how extra (idle)
capacity is allocated to it. A weight of -1 indicates a soft cap is in
place.
- Minimum Capacity
-
The minimum number of processing units this LPAR was defined to ever have.
Entitled capacity can be reduced down to this value.
- Maximum Capacity
-
The maximum number of processing units this LPAR was defined to ever have.
Entitled capacity can be increased up to this value.
- Capacity Increment
-
The granule at which changes to Entitled Capacity can be made. A value in
whole multiples indicates a Dedicated LPAR.
- Active Physical CPUs in System
-
The current number of active physical CPUs in the system containing this
LPAR.
- Active CPUs in Pool
-
The maximum number of CPUs available to this LPAR's shared processor
pool.
- Maximum Capacity of Pool
-
The maximum number of processing units available to this LPAR's shared
processor pool.
- Entitled Capacity of Pool
-
The number of processing units that this LPAR's shared processor pool is
entitled to receive.
- Unallocated Capacity
-
The sum of the number of processor units unallocated from shared LPARs in
an LPAR group. This sum does not include the processor units unallocated
from a dedicated LPAR, which can also belong to the group. The unallocated
processor units can be allocated to any dedicated LPAR (if it is greater
than or equal to 1.0 ) or shared LPAR of the group.
- Physical CPU Percentage
-
Fractional representation relative to whole physical CPUs that these LPARs
virtual CPUs equate to. This is a function of Entitled Capacity / Online
CPUs. Dedicated LPARs would have 100% Physical CPU Percentage. A 4-way
virtual with Entitled Capacity of 2 processor units would have a 50%
physical CPU Percentage.
- Unallocated Weight
-
Number of variable processor capacity weight units currently unallocated
within the LPAR group.
- Memory Mode
- Indicates whether the memory mode is shared or dedicated. If Active Memory
Expansion is enabled, the memory mode also includes a new mode called
Expanded.
- Total I/O Memory Entitlement
- The I/O memory entitlement of the LPAR.
- Variable Memory Capacity Weight
- Memory Pool ID
- The memory pool ID of the pool that the LPAR belongs to.
- Physical Memory in the Pool
- The physical memory present in the pool that the LPAR belongs to.
- Unallocated Variable Memory Capacity Weight
- he unallocated variable memory-capacity weight of the LPAR.
- Unallocated I/O Memory Entitlement
- The unallocated I/O memory entitlement of the LPAR.
- Memory Group ID of LPAR
- The memory group ID of the Workload Manager group that the LPAR belongs
to.
- Desired Variable Capacity Weight
- The variable memory capacity weight of the LPAR.
interval¶
The
interval parameter specifies the amount of time between each report.
count¶
The
count parameter specifies how many reports will be displayed.