NAME¶
Scope::Upper - Act on upper scopes.
VERSION¶
Version 0.25
SYNOPSIS¶
"reap", "localize", "localize_elem",
"localize_delete" and "WORDS" :
package Scope;
use Scope::Upper qw<
reap localize localize_elem localize_delete
:words
>;
sub new {
my ($class, $name) = @_;
localize '$tag' => bless({ name => $name }, $class) => UP;
reap { print Scope->tag->name, ": end\n" } UP;
}
# Get the tag stored in the caller namespace
sub tag {
my $l = 0;
my $pkg = __PACKAGE__;
$pkg = caller $l++ while $pkg eq __PACKAGE__;
no strict 'refs';
${$pkg . '::tag'};
}
sub name { shift->{name} }
# Locally capture warnings and reprint them with the name prefixed
sub catch {
localize_elem '%SIG', '__WARN__' => sub {
print Scope->tag->name, ': ', @_;
} => UP;
}
# Locally clear @INC
sub private {
for (reverse 0 .. $#INC) {
# First UP is the for loop, second is the sub boundary
localize_delete '@INC', $_ => UP UP;
}
}
...
package UserLand;
{
Scope->new("top"); # initializes $UserLand::tag
{
Scope->catch;
my $one = 1 + undef; # prints "top: Use of uninitialized value..."
{
Scope->private;
eval { require Cwd };
print $@; # prints "Can't locate Cwd.pm in @INC
} # (@INC contains:) at..."
require Cwd; # loads Cwd.pm
}
} # prints "top: done"
"unwind" and "want_at" :
package Try;
use Scope::Upper qw<unwind want_at :words>;
sub try (&) {
my @result = shift->();
my $cx = SUB UP; # Point to the sub above this one
unwind +(want_at($cx) ? @result : scalar @result) => $cx;
}
...
sub zap {
try {
my @things = qw<a b c>;
return @things; # returns to try() and then outside zap()
# not reached
};
# not reached
}
my @stuff = zap(); # @stuff contains qw<a b c>
my $stuff = zap(); # $stuff contains 3
"uplevel" :
package Uplevel;
use Scope::Upper qw<uplevel CALLER>;
sub target {
faker(@_);
}
sub faker {
uplevel {
my $sub = (caller 0)[3];
print "$_[0] from $sub()";
} @_ => CALLER(1);
}
target('hello'); # "hello from Uplevel::target()"
"uid" and "validate_uid" :
use Scope::Upper qw<uid validate_uid>;
my $uid;
{
$uid = uid();
{
if ($uid eq uid(UP)) { # yes
...
}
if (validate_uid($uid)) { # yes
...
}
}
}
if (validate_uid($uid)) { # no
...
}
DESCRIPTION¶
This module lets you defer actions
at run-time that will take place when
the control flow returns into an upper scope. Currently, you can:
- •
- hook an upper scope end with "reap" ;
- •
- localize variables, array/hash values or deletions of elements in higher
contexts with respectively "localize", "localize_elem"
and "localize_delete" ;
- •
- return values immediately to an upper level with "unwind",
"yield" and "leave" ;
- •
- gather information about an upper context with "want_at" and
"context_info" ;
- •
- execute a subroutine in the setting of an upper subroutine stack frame
with "uplevel" ;
- •
- uniquely identify contexts with "uid" and
"validate_uid".
FUNCTIONS¶
In all those functions, $context refers to the target scope.
You have to use one or a combination of "WORDS" to build the $context
passed to these functions. This is needed in order to ensure that the module
still works when your program is ran in the debugger. The only thing you can
assume is that it is an
absolute indicator of the frame, which means
that you can safely store it at some point and use it when needed, and it will
still denote the original scope.
"reap"¶
reap { ... };
reap { ... } $context;
&reap($callback, $context);
Adds a destructor that calls $callback (in void context) when the upper scope
represented by $context ends.
"localize"¶
localize $what, $value;
localize $what, $value, $context;
Introduces a "local" delayed to the time of first return into the
upper scope denoted by $context. $what can be :
- •
- A glob, in which case $value can either be a glob or a reference.
"localize" follows then the same syntax as "local *x =
$value". For example, if $value is a scalar reference, then the
"SCALAR" slot of the glob will be set to $$value - just like
"local *x = \1" sets $x to 1.
- •
- A string beginning with a sigil, representing the symbol to localize and
to assign to. If the sigil is '$', "localize" follows the same
syntax as "local $x = $value", i.e. $value isn't dereferenced.
For example,
localize '$x', \'foo' => HERE;
will set $x to a reference to the string 'foo'. Other sigils ('@', '%',
'&' and '*') require $value to be a reference of the corresponding
type.
When the symbol is given by a string, it is resolved when the actual
localization takes place and not when "localize" is called.
Thus, if the symbol name is not qualified, it will refer to the variable
in the package where the localization actually takes place and not in the
one where the "localize" call was compiled. For example,
{
package Scope;
sub new { localize '$tag', $_[0] => UP }
}
{
package Tool;
{
Scope->new;
...
}
}
will localize $Tool::tag and not $Scope::tag. If you want the other
behaviour, you just have to specify $what as a glob or a qualified name.
Note that if $what is a string denoting a variable that wasn't declared
beforehand, the relevant slot will be vivified as needed and won't be
deleted from the glob when the localization ends. This situation never
arises with "local" because it only compiles when the localized
variable is already declared. Although I believe it shouldn't be a problem
as glob slots definedness is pretty much an implementation detail, this
behaviour may change in the future if proved harmful.
"localize_elem"¶
localize_elem $what, $key, $value;
localize_elem $what, $key, $value, $context;
Introduces a "local $what[$key] = $value" or "local $what{$key} =
$value" delayed to the time of first return into the upper scope denoted
by $context. Unlike "localize", $what must be a string and the type
of localization is inferred from its sigil. The two only valid types are array
and hash ; for anything besides those, "localize_elem" will throw an
exception. $key is either an array index or a hash key, depending of which
kind of variable you localize.
If $what is a string pointing to an undeclared variable, the variable will be
vivified as soon as the localization occurs and emptied when it ends, although
it will still exist in its glob.
"localize_delete"¶
localize_delete $what, $key;
localize_delete $what, $key, $context;
Introduces the deletion of a variable or an array/hash element delayed to the
time of first return into the upper scope denoted by $context. $what can be:
- •
- A glob, in which case $key is ignored and the call is equivalent to
"local *x".
- •
- A string beginning with '@' or '%', for which the call is equivalent to
respectively "local $a[$key]; delete $a[$key]" and "local
$h{$key}; delete $h{$key}".
- •
- A string beginning with '&', which more or less does "undef
&func" in the upper scope. It's actually more powerful, as
&func won't even "exists" anymore. $key is ignored.
"unwind"¶
unwind;
unwind @values, $context;
Returns @values
from the subroutine, eval or format context pointed by or
just above $context, and immediately restarts the program flow at this point -
thus effectively returning @values to an upper scope. If @values is empty,
then the $context parameter is optional and defaults to the current context
(making the call equivalent to a bare "return;") ; otherwise it is
mandatory.
The upper context isn't coerced onto @values, which is hence always evaluated in
list context. This means that
my $num = sub {
my @a = ('a' .. 'z');
unwind @a => HERE;
# not reached
}->();
will set $num to 'z'. You can use "want_at" to handle these cases.
"yield"¶
yield;
yield @values, $context;
Returns @values
from the context pointed by or just above $context, and
immediately restarts the program flow at this point. If @values is empty, then
the $context parameter is optional and defaults to the current context ;
otherwise it is mandatory.
"yield" differs from "unwind" in that it can target
any upper scope (besides a "s///e" substitution context) and
not necessarily a sub, an eval or a format. Hence you can use it to return
values from a "do" or a "map" block :
my $now = do {
local $@;
eval { require Time::HiRes } or yield time() => HERE;
Time::HiRes::time();
};
my @uniq = map {
yield if $seen{$_}++; # returns the empty list from the block
...
} @things;
Like for "unwind", the upper context isn't coerced onto @values. You
can use the fifth value returned by "context_info" to handle context
coercion.
"leave"¶
leave;
leave @values;
Immediately returns @values from the current block, whatever it may be (besides
a "s///e" substitution context). "leave" is actually a
synonym for "yield HERE", while "leave @values" is a
synonym for "yield @values, HERE".
Like for "yield", you can use the fifth value returned by
"context_info" to handle context coercion.
"want_at"¶
my $want = want_at;
my $want = want_at $context;
Like "wantarray" in perlfunc, but for the subroutine, eval or format
context located at or just above $context.
It can be used to revise the example showed in "unwind" :
my $num = sub {
my @a = ('a' .. 'z');
unwind +(want_at(HERE) ? @a : scalar @a) => HERE;
# not reached
}->();
will rightfully set $num to 26.
"context_info"¶
my ($package, $filename, $line, $subroutine, $hasargs,
$wantarray, $evaltext, $is_require, $hints, $bitmask,
$hinthash) = context_info $context;
Gives information about the context denoted by $context, akin to what
"caller" in perlfunc provides but not limited only to subroutine,
eval and format contexts. When $context is omitted, it defaults to the current
context.
The returned values are, in order :
- •
- (index 0) : the namespace in use when the context was created
;
- •
- (index 1) : the name of the file at the point where the context was
created ;
- •
- (index 2) : the line number at the point where the context was
created ;
- •
- (index 3) : the name of the subroutine called for this context, or
"undef" if this is not a subroutine context ;
- •
- (index 4) : a boolean indicating whether a new instance of @_ was
set up for this context, or "undef" if this is not a subroutine
context ;
- •
- (index 5) : the context (in the sense of "wantarray" in
perlfunc) in which the context (in our sense) is executed ;
- •
- (index 6) : the contents of the string being compiled for this
context, or "undef" if this is not an eval context ;
- •
- (index 7) : a boolean indicating whether this eval context was
created by "require", or "undef" if this is not an
eval context ;
- •
- (index 8) : the value of the lexical hints in use when the context
was created ;
- •
- (index 9) : a bit string representing the warnings in use when the
context was created ;
- •
- (index 10) : a reference to the lexical hints hash in use when the
context was created (only on perl 5.10 or greater).
"uplevel"¶
my @ret = uplevel { ...; return @ret };
my @ret = uplevel { my @args = @_; ...; return @ret } @args, $context;
my @ret = &uplevel($callback, @args, $context);
Executes the code reference $callback with arguments @args as if it were located
at the subroutine stack frame pointed by $context, effectively fooling
"caller" and "die" into believing that the call actually
happened higher in the stack. The code is executed in the context of the
"uplevel" call, and what it returns is returned as-is by
"uplevel".
sub target {
faker(@_);
}
sub faker {
uplevel {
map { 1 / $_ } @_;
} @_ => CALLER(1);
}
my @inverses = target(1, 2, 4); # @inverses contains (0, 0.5, 0.25)
my $count = target(1, 2, 4); # $count is 3
Note that if @args is empty, then the $context parameter is optional and
defaults to the current context ; otherwise it is mandatory.
Sub::Uplevel also implements a pure-Perl version of "uplevel". Both
are identical, with the following caveats :
- •
- The Sub::Uplevel implementation of "uplevel" may execute a code
reference in the context of any upper stack frame. The Scope::Upper
version can only uplevel to a subroutine stack frame, and will
croak if you try to target an "eval" or a format.
- •
- Exceptions thrown from the code called by this version of
"uplevel" will not be caught by "eval" blocks between
the target frame and the uplevel call, while they will for Sub::Uplevel's
version. This means that :
eval {
sub {
local $@;
eval {
sub {
uplevel { die 'wut' } CALLER(2); # for Scope::Upper
# uplevel(3, sub { die 'wut' }) # for Sub::Uplevel
}->();
};
print "inner block: $@";
$@ and exit;
}->();
};
print "outer block: $@";
will print "inner block: wut..." with Sub::Uplevel and "outer
block: wut..." with Scope::Upper.
- •
- Sub::Uplevel globally overrides the Perl keyword "caller", while
Scope::Upper does not.
A simple wrapper lets you mimic the interface of "uplevel" in
Sub::Uplevel :
use Scope::Upper;
sub uplevel {
my $frame = shift;
my $code = shift;
my $cxt = Scope::Upper::CALLER($frame);
&Scope::Upper::uplevel($code => @_ => $cxt);
}
Albeit the three exceptions listed above, it passes all the tests of
Sub::Uplevel.
"uid"¶
my $uid = uid;
my $uid = uid $context;
Returns an unique identifier (UID) for the context (or dynamic scope) pointed by
$context, or for the current context if $context is omitted. This UID will
only be valid for the life time of the context it represents, and another UID
will be generated next time the same scope is executed.
my $uid;
{
$uid = uid;
if ($uid eq uid()) { # yes, this is the same context
...
}
{
if ($uid eq uid()) { # no, we are one scope below
...
}
if ($uid eq uid(UP)) { # yes, UP points to the same scope as $uid
...
}
}
}
# $uid is now invalid
{
if ($uid eq uid()) { # no, this is another block
...
}
}
For example, each loop iteration gets its own UID :
my %uids;
for (1 .. 5) {
my $uid = uid;
$uids{$uid} = $_;
}
# %uids has 5 entries
The UIDs are not guaranteed to be numbers, so you must use the "eq"
operator to compare them.
To check whether a given UID is valid, you can use the "validate_uid"
function.
"validate_uid"¶
my $is_valid = validate_uid $uid;
Returns true if and only if $uid is the UID of a currently valid context (that
is, it designates a scope that is higher than the current one in the call
stack).
my $uid;
{
$uid = uid();
if (validate_uid($uid)) { # yes
...
}
{
if (validate_uid($uid)) { # yes
...
}
}
}
if (validate_uid($uid)) { # no
...
}
CONSTANTS¶
"SU_THREADSAFE"¶
True iff the module could have been built when thread-safety features.
WORDS¶
Constants¶
"TOP"
my $top_context = TOP;
Returns the context that currently represents the highest scope.
"HERE"
my $current_context = HERE;
The context of the current scope.
Getting a context from a context¶
For any of those functions, $from is expected to be a context. When omitted, it
defaults to the current context.
"UP"
my $upper_context = UP;
my $upper_context = UP $from;
The context of the scope just above $from.
"SUB"
my $sub_context = SUB;
my $sub_context = SUB $from;
The context of the closest subroutine above $from. Note that $from is returned
if it is already a subroutine context ; hence "SUB SUB == SUB".
"EVAL"
my $eval_context = EVAL;
my $eval_context = EVAL $from;
The context of the closest eval above $from. Note that $from is returned if it
is already an eval context ; hence "EVAL EVAL == EVAL".
Getting a context from a level¶
Here, $level should denote a number of scopes above the current one. When
omitted, it defaults to 0 and those functions return the same context as
"HERE".
"SCOPE"
my $context = SCOPE;
my $context = SCOPE $level;
The $level-th upper context, regardless of its type.
"CALLER"
my $context = CALLER;
my $context = CALLER $level;
The context of the $level-th upper subroutine/eval/format. It kind of
corresponds to the context represented by "caller $level", but while
e.g. "caller 0" refers to the caller context, "CALLER 0"
will refer to the top scope in the current context.
Examples¶
Where "reap" fires depending on the $cxt :
sub {
eval {
sub {
{
reap \&cleanup => $cxt;
...
} # $cxt = SCOPE(0) = HERE
...
}->(); # $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
}; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
}->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
Where "localize", "localize_elem" and
"localize_delete" act depending on the $cxt :
sub {
eval {
sub {
{
localize '$x' => 1 => $cxt;
# $cxt = SCOPE(0) = HERE
...
}
# $cxt = SCOPE(1) = UP = SUB = CALLER(0)
...
}->();
# $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1)
...
};
# $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
}->();
# $cxt = SCOPE(4), UP SUB UP SUB = UP SUB EVAL = UP CALLER(2) = TOP
...
Where "unwind", "yield", "want_at",
"context_info" and "uplevel" point to depending on the
$cxt:
sub {
eval {
sub {
{
unwind @things => $cxt; # or yield @things => $cxt
# or uplevel { ... } $cxt
...
}
...
}->(); # $cxt = SCOPE(0) = SCOPE(1) = HERE = UP = SUB = CALLER(0)
...
}; # $cxt = SCOPE(2) = UP UP = UP SUB = EVAL = CALLER(1) (*)
...
}->(); # $cxt = SCOPE(3) = SUB UP SUB = SUB EVAL = CALLER(2)
...
# (*) Note that uplevel() will croak if you pass that scope frame,
# because it cannot target eval scopes.
EXPORT¶
The functions "reap", "localize", "localize_elem",
"localize_delete", "unwind", "yield",
"leave", "want_at", "context_info" and
"uplevel" are only exported on request, either individually or by
the tags ':funcs' and ':all'.
The constant "SU_THREADSAFE" is also only exported on request,
individually or by the tags ':consts' and ':all'.
Same goes for the words "TOP", "HERE", "UP",
"SUB", "EVAL", "SCOPE" and "CALLER"
that are only exported on request, individually or by the tags ':words' and
':all'.
CAVEATS¶
Be careful that local variables are restored in the reverse order in which they
were localized. Consider those examples:
local $x = 0;
{
reap sub { print $x } => HERE;
local $x = 1;
...
}
# prints '0'
...
{
local $x = 1;
reap sub { $x = 2 } => HERE;
...
}
# $x is 0
The first case is "solved" by moving the "local" before the
"reap", and the second by using "localize" instead of
"reap".
The effects of "reap", "localize" and
"localize_elem" can't cross "BEGIN" blocks, hence calling
those functions in "import" is deemed to be useless. This is an
hopeless case because "BEGIN" blocks are executed once while
localizing constructs should do their job at each run. However, it's possible
to hook the end of the current scope compilation with B::Hooks::EndOfScope.
Some rare oddities may still happen when running inside the debugger. It may
help to use a perl higher than 5.8.9 or 5.10.0, as they contain some
context-related fixes.
Calling "goto" to replace an "uplevel"'d code frame does not
work :
- •
- for a "perl" older than the 5.8 series ;
- •
- for a "DEBUGGING" "perl" run with debugging flags set
(as in "perl -D ...") ;
- •
- when the runloop callback is replaced by another module.
In those three cases, "uplevel" will look for a "goto
&sub" statement in its callback and, if there is one, throw an
exception before executing the code.
Moreover, in order to handle "goto" statements properly,
"uplevel" currently has to suffer a run-time overhead proportional
to the size of the callback in every case (with a small ratio), and
proportional to the size of
all the code executed as the result of the
"uplevel" call (including subroutine calls inside the callback) when
a "goto" statement is found in the "uplevel" callback.
Despite this shortcoming, this XS version of "uplevel" should still
run way faster than the pure-Perl version from Sub::Uplevel.
DEPENDENCIES¶
perl 5.6.1.
A C compiler. This module may happen to build with a C++ compiler as well, but
don't rely on it, as no guarantee is made in this regard.
XSLoader (core since perl 5.6.0).
SEE ALSO¶
"local" in perlfunc, "Temporary Values via
local()"
in perlsub.
Alias, Hook::Scope, Scope::Guard, Guard.
Sub::Uplevel.
Continuation::Escape is a thin wrapper around Scope::Upper that gives you a
continuation passing style interface to "unwind". It's easier to
use, but it requires you to have control over the scope where you want to
return.
Scope::Escape.
AUTHOR¶
Vincent Pit, "<perl at profvince.com>",
<
http://www.profvince.com>.
You can contact me by mail or on "irc.perl.org" (vincent).
BUGS¶
Please report any bugs or feature requests to "bug-scope-upper at
rt.cpan.org", or through the web interface at
<
http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Scope-Upper>. I will be
notified, and then you'll automatically be notified of progress on your bug as
I make changes.
SUPPORT¶
You can find documentation for this module with the perldoc command.
perldoc Scope::Upper
Tests code coverage report is available at
<
http://www.profvince.com/perl/cover/Scope-Upper>.
ACKNOWLEDGEMENTS¶
Inspired by Ricardo Signes.
Thanks to Shawn M. Moore for motivation.
COPYRIGHT & LICENSE¶
Copyright 2008,2009,2010,2011,2012,2013,2014 Vincent Pit, all rights reserved.
This program is free software; you can redistribute it and/or modify it under
the same terms as Perl itself.