NAME¶
jackd - JACK Audio Connection Kit sound server
SYNOPSIS¶
jackd [
options]
-d backend [
backend-parameters]
jackd --help
DESCRIPTION¶
jackd is the JACK audio server daemon, a low-latency audio server.
Originally written for the GNU/Linux operating system, it also supports Mac OS
X and various Unix platforms. JACK can connect a number of different client
applications to an audio device and also to each other. Most clients are
external, running in their own processes as normal applications. JACK also
supports internal clients, which run within the
jackd process using a
loadable "plugin" interface.
JACK differs from other audio servers in being designed from the ground up for
professional audio work. It focuses on two key areas: synchronous execution of
all clients, and low latency operation.
For the latest JACK information, please consult the web site, <
http://www.jackaudio.org>.
OPTIONS¶
- -d, --driver backend [backend-parameters ]
-
Select the audio interface backend. The current list of supported backends
is: alsa, coreaudio, dummy, freebob,
oss sun and portaudio. They are not all available on
all platforms. All backend-parameters are optional.
- -h, --help
-
Print a brief usage message describing the main jackd options. These
do not include backend-parameters, which are listed using the
--help option for each specific backend. Examples below show how to
list them.
- -m, --no-mlock
- Do not attempt to lock memory, even if --realtime.
- -A device, -A device%p, -A
device%c
-
(Linux-only) A simplified way to add additional audio I/O hardware to an
instance of JACK. This argument is actually just a wrapper around the -I
(internal client) version, requiring only the name of the ALSA
"card" to be used. The name should NOT include any ALSA
device access prefix (e.g. "hw:" or "plughw:") but can
include a subdevice. If %p is added to the device name, it will be made
available for playback only. If %c is added to the device name, it will be
made available for capture (recording) only. If neither %p nor %c is
added, it will be made available (if possible) for both capture and
playback. Although device names may be visible in various places on your
system, the file /proc/asound/cards shows them inside square braces.
Examples:
-A SB (adds playback and capture for the "SB" device)
-A Codec,1%c (adds capture (recording) for the 2nd subdevice of the
"Codec" device)
-A MT1a2%p (adds playback the 1st subdevice of the "MT1a2" device)
The use of -A CARD is actually equivalent to -I foo:zalsa_in/-dhw:CARD
and -I CARD:zalsa_out/-dhw:CARD.
The use of -A CARD%p is actually equivalent to -I CARD:zalsa_out/-dhw:CARD.
The use of -A CARD%c is actually equivalent to -I CARD:zalsa_in/-dhw:CARD
Note that this option (like -I) can be used regardless of the backend used,
so even if you do not use the ALSA backend, you can still add
ALSA-supported devices to an instance of JACK.
- -I, --internal-client client-spec
-
Load client-name as an internal client. May be used multiple times.
The form of client-spec can be any of the following:
client-path
client-name:client-path
client-name:client-path/init-string
client-path/init-string
The first form will cause jackd to attempt to load the client from a shared
object named "client-path" with appropriate suffixes appended.
If "client-path" is absolute, jackd will use that (adding a
platform appropriate suffix for a shared object). If it is not absolute,
jackd will look for "client-path" (with an appropriate suffix)
in the same location that drivers and other JACK add-ons are located.
The second form provides "client-name" as the desired name for the
client once loaded, in addition to the "client-path".
The third form provides an "init-string" in addition to a client
name and path, which will be passed to the client's initialization
function.
The final form does not specify the client name, but does include the path
to the client's shared object file and an initializations string.
When invoking JACK from the shell, remember to quote the argument to -I if
it includes spaces.
- -M, --midi-bufsize [ event-count ]
- Specify the size of the buffer used for MIDI ports. Units are "MIDI
events per process() cycle", where an event occupies up to 4 bytes
(as most common MIDI events do). The default buffer size is 2048 bytes,
which is about 500 MIDI events. Typical values for event-count will
range from 10 to about 1000. Be aware that using very high values along
with a large number of ports may cause JACK to fail to start because of
the amount of memory that would be required.
- -n, --name server-name
- Name this jackd instance server-name. If unspecified, this
name comes from the $JACK_DEFAULT_SERVER environment variable. It
will be "default" if that is not defined.
- -p, --port-max n
- Set the maximum number of ports the JACK server can manage. The default
value is 256.
- --replace-registry
-
Remove the shared memory registry used by all JACK server instances before
startup. This should rarely be used, and is intended only for occasions
when the structure of this registry changes in ways that are incompatible
across JACK versions (which is rare).
- -R, --realtime
-
Use realtime scheduling (default = true). This is needed for reliable
low-latency performance. On many systems, it requires jackd to run
with special scheduler and memory allocation privileges, which may be
obtained in several ways.
- -r, --no-realtime
-
Do not use realtime scheduling.
- -P, --realtime-priority int
- When running --realtime, set the scheduler priority to
int.
- --silent
- Silence any output during operation.
- -S, --sync
-
This option does nothing in this implementation of JACK, but exists for
command-line compatibility with JACK2 and possibly other versions.
- -T, --temporary
- Exit once all clients have closed their connections.
- -t, --timeout int
-
Set client timeout limit in milliseconds. The default is 500 msec.
- -X, --slave-driver driver-name
-
Asks the server to load the "slave" driver given by
driver-name. Slave drivers can provide builtin-access to other
devices and protocols; the primary slave-driver at this time is the
"alsa_midi" one which provides bridging on Linux between native
ALSA MIDI and JACK MIDI.
- -Z, --nozombies
-
Prevent JACK from ever kicking out clients because they were too slow. This
cancels the effect any specified timeout value.
- -C, --timeout-thres time
-
Stop processing clients if JACK cannot complete the process cycle in time
(typically caused by CPU overloading or misbehaved clients). The optional
time argument specifies the number of miliseconds, during which
consectutive process cycles must fail before JACK gives up (if the
argument is not given, it defaults to 250). Processing will resume on the
next change to the port graph (i.e. a port is added, removed, connected or
disconnected)
- -u, --unlock
-
Unlock libraries GTK+, QT, FLTK, Wine.
- -v, --verbose
- Give verbose output.
- -c, --clocksource ( c(ycle) | h(pet) | s(ystem)
)
- Select a specific wall clock (Cycle Counter, HPET timer, System
timer).
- -V, --version
- Print the current JACK version number and exit.
ALSA BACKEND OPTIONS¶
- -C, --capture [ name ]
- Provide only capture ports, unless combined with -D or -P. Parameterally
set capture device name.
- -d, --device name
-
The ALSA pcm device name to use. If none is specified, JACK will use
"hw:0", the first hardware card defined in
/etc/modules.conf.
- -z, --dither [rectangular,triangular,shaped,none]
- Set dithering mode. If none or unspecified, dithering is off. Only
the first letter of the mode name is required.
- -D, --duplex
- Provide both capture and playback ports. Defaults to on unless only one of
-P or -C is specified.
- -h, --help Print a brief usage message describing only the
- alsa backend parameters.
- -M, --hwmeter
-
Enable hardware metering for devices that support it. Otherwise, use
software metering.
- -H, --hwmon
-
Enable hardware monitoring of capture ports. This is a method for obtaining
"zero latency" monitoring of audio input. It requires support in
hardware and from the underlying ALSA device driver.
When enabled, requests to monitor capture ports will be satisfied by
creating a direct signal path between audio interface input and output
connectors, with no processing by the host computer at all. This offers
the lowest possible latency for the monitored signal.
Presently (March 2003), only the RME Hammerfall series and cards based on
the ICE1712 chipset (M-Audio Delta series, Terratec, and others) support
--hwmon. In the future, some consumer cards may also be supported
by modifying their mixer settings.
Without --hwmon, port monitoring requires JACK to read audio into
system memory, then copy it back out to the hardware again, imposing the
basic JACK system latency determined by the --period and
--nperiods parameters.
- -i, --inchannels int
-
Number of capture channels. Default is maximum supported by hardware.
- -n, --nperiods int
-
Specify the number of periods of playback latency. In seconds, this
corresponds to --nperiods times --period divided by
--rate. The default is 2, the minimum allowable. For most devices,
there is no need for any other value with the --realtime option.
Without realtime privileges or with boards providing unreliable interrupts
(like ymfpci), a larger value may yield fewer xruns. This can also help if
the system is not tuned for reliable realtime scheduling.
For most ALSA devices, the hardware buffer has exactly --period times
--nperiods frames. Some devices demand a larger buffer. If so, JACK
will use the smallest possible buffer containing at least
--nperiods, but the playback latency does not increase.
For USB audio devices it is recommended to use -n 3. Firewire devices
supported by FFADO (formerly Freebob) are configured with -n 3 by
default.
- -o, --outchannels int
-
Number of playback channels. Default is maximum supported by hardware.
- -P, --playback [ name ]
- Provide only playback ports, unless combined with -D or -C. Optionally set
playback device name.
- -p, --period int
-
Specify the number of frames between JACK process() calls. This value
must be a power of 2, and the default is 1024. If you need low latency,
set -p as low as you can go without seeing xruns. A larger period
size yields higher latency, but makes xruns less likely. The JACK capture
latency in seconds is --period divided by --rate.
- -r, --rate int
- Specify the sample rate. The default is 48000.
- -S, --shorts
-
Try to configure card for 16-bit samples first, only trying 32-bits if
unsuccessful. Default is to prefer 32-bit samples.
- -s, --softmode
-
Ignore xruns reported by the ALSA driver. This makes JACK less likely to
disconnect unresponsive ports when running without --realtime.
- -X, --midi seq
-
Provide bridging between ALSA MIDI and JACK MIDI (using the ALSA sequencer
system). All ALSA MIDI clients and MIDI hardware that exist when jackd
starts will be represented by JACK MIDI ports.
The "seq" argument has been retained from older versions of JACK,
in part to provide for the possibility of alternate implementations.
COREAUDIO BACKEND PARAMETERS¶
- -c --channel
- Maximum number of channels (default: 2)
- -i --channelin
- Maximum number of input channels (default: 2)
- -o --channelout
- Maximum number of output channels (default: 2)
- -C --capture
- Whether or not to capture (default: true)
- -P --playback
- Whether or not to playback (default: true)
- -D --duplex
- Capture and playback (default: true)
- -r --rate
- Sample rate (default: 44100)
- -p --period
- Frames per period (default: 128). Must be a power of 2.
- -n --name
- Driver name (default: none)
- -I --id
- Audio Device ID (default: 0)
DUMMY BACKEND PARAMETERS¶
- -C, --capture int
- Specify number of capture ports. The default value is 2.
- -P, --playback int
- Specify number of playback ports. The default value is 2.
- -r, --rate int
- Specify sample rate. The default value is 48000.
- -p, --period int
- Specify the number of frames between JACK process() calls. This
value must be a power of 2, and the default is 1024. If you need low
latency, set -p as low as you can go without seeing xruns. A larger
period size yields higher latency, but makes xruns less likely. The JACK
capture latency in seconds is --period divided by
--rate.
- -w, --wait int
- Specify number of usecs to wait between engine processes. The default
value is 21333.
NET BACKEND PARAMETERS¶
-
-i, --audio-ins int
- Number of capture channels (default: 2)
-
-o, --audio-outs int
- Number of playback channels (default: 2)
-
-I, --midi-ins int
- Number of midi capture channels (default: 1)
- -O, --midi-outs int
- Number of midi playback channels (default: 1)
-
-r, --rate int
- Sample rate (default: 48000)
- -p, --period int
- Frames per period (default: 1024)
- -n, --num-periods int
- Network latency setting in no. of periods (default: 5)
- -l, --listen-port int
- The socket port we are listening on for sync packets (default: 3000)
- -f, --factor int
- Factor for sample rate reduction (default: 1)
- -u, --upstream-factor int
- Factor for sample rate reduction on the upstream (default: 0)
- -c, --celt int
- sets celt encoding and number of kbits per channel (default: 0)
- -b, --bit-depth int
- Sample bit-depth (0 for float, 8 for 8bit and 16 for 16bit) (default:
0)
- -t, --transport-sync int
- Whether to slave the transport to the master transport (default:
true)
- -a, --autoconf int
- Whether to use Autoconfig, or just start. (default: true)
- -R, --redundancy int
- Send packets N times (default: 1)
- -e, --native-endian int
- Dont convert samples to network byte order. (default: false)
- -J, --jitterval int
- attempted jitterbuffer microseconds on master (default: 0)
- -D, --always-deadline int
- always use deadline (default: false)
OSS BACKEND PARAMETERS¶
- -r, --rate int
- Specify the sample rate. The default is 48000.
- -p, --period int
- Specify the number of frames between JACK process() calls. This
value must be a power of 2, and the default is 1024. If you need low
latency, set -p as low as you can go without seeing xruns. A larger
period size yields higher latency, but makes xruns less likely. The JACK
capture latency in seconds is --period divided by
--rate.
- -n, --nperiods int
- Specify the number of periods in the hardware buffer. The default is 2.
The period size ( -p) times --nperiods times four is the
JACK buffer size in bytes. The JACK output latency in seconds is
--nperiods times --period divided by --rate.
- -w, --wordlength int
- Specify the sample size in bits. The default is 16.
- -i, --inchannels int
- Specify how many channels to capture (default: 2)
- -o, --outchannels int
- Specify number of playback channels (default: 2)
- -C, --capture device_file
- Specify input device for capture (default: /dev/dsp)
- -P, --playback device_file
- Specify output device for playback (default: /dev/dsp)
- -b, --ignorehwbuf boolean
- Specify, whether to ignore hardware period size (default: false)
SUN BACKEND PARAMETERS¶
- -r, --rate int
- Specify the sample rate. The default is 48000.
- -p, --period int
- Specify the number of frames between JACK process() calls. This
value must be a power of 2, and the default is 1024. If you need low
latency, set -p as low as you can go without seeing xruns. A larger
period size yields higher latency, but makes xruns less likely. The JACK
capture latency in seconds is --period divided by
--rate.
- -n, --nperiods int
- Specify the number of periods in the hardware buffer. The default is 2.
The period size ( -p) times --nperiods times four (assuming
2 channels 16-bit samples) is the JACK buffer size in bytes. The JACK
output latency in seconds is --nperiods times --period
divided by --rate.
- -w, --wordlength int
- Specify the sample size in bits. The default is 16.
- -i, --inchannels int
- Specify how many channels to capture (default: 2)
- -o, --outchannels int
- Specify number of playback channels (default: 2)
- -C, --capture device_file
- Specify input device for capture (default: /dev/audio)
- -P, --playback device_file
- Specify output device for playback (default: /dev/audio)
- -b, --ignorehwbuf boolean
- Specify, whether to ignore hardware period size (default: false)
PORTAUDIO BACKEND PARAMETERS¶
- -c --channel
- Maximum number of channels (default: all available hardware channels)
- -i --channelin
- Maximum number of input channels (default: all available hardware
channels)
- -o --channelout
- Maximum number of output channels (default: all available hardware
channels)
- -C --capture
- Whether or not to capture (default: true)
- -P --playback
- Whether or not to playback (default: true)
- -D --duplex
- Capture and playback (default: true)
- -r --rate
- Sample rate (default: 48000)
- -p --period
- Frames per period (default: 1024). Must be a power of 2.
- -n --name
- Driver name (default: none)
- -z --dither
- Dithering mode (default: none)
EXAMPLES¶
Print usage message for the parameters specific to each backend.
- jackd -d alsa --help
jackd -d coreaudio --help
jackd -d net --help
jackd -d dummy --help
jackd -d firewire --help
jackd -d freebob --help
jackd -d oss --help
jackd -d sun --help
jackd -d portaudio --help
Run the JACK daemon with realtime priority using the first ALSA hardware card
defined in
/etc/modules.conf.
- jackstart --realtime --driver=alsa
Run the JACK daemon with low latency giving verbose output, which can be helpful
for trouble-shooting system latency problems. A reasonably well-tuned system
with a good sound card and a low-latency kernel can handle these values
reliably. Some can do better. If you get xrun messages, try a larger buffer.
Tuning a system for low latency can be challenging. The JACK FAQ,
http://jackit.sourceforge.net/docs/faq.php has some useful suggestions.
- jackstart -Rv -d alsa -p 128 -n 2 -r 44100
Run
jackd with realtime priority using the "sblive" ALSA device
defined in ~/.asoundrc. Apply shaped dithering to playback audio.
- jackd -R -d alsa -d sblive --dither=shaped
Run
jackd with no special privileges using the second ALSA hardware card
defined in
/etc/modules.conf. Any xruns reported by the ALSA backend
will be ignored. The larger buffer helps reduce data loss. Rectangular
dithering will be used for playback.
- jackd -d alsa -d hw:1 -p2048 -n3 --softmode -zr
Run
jackd in full-duplex mode using the ALSA hw:0,0 device for playback
and the hw:0,2 device for capture.
- jackd -d alsa -P hw:0,0 -C hw:0,2
Run
jackd in playback-only mode using the ALSA hw:0,0 device.
- jackd -d alsa -P hw:0,0
ENVIRONMENT¶
JACK is evolving a mechanism for automatically starting the server when needed.
Any client started without a running JACK server will attempt to start one
itself using the command line found in the first line of
$HOME/.jackdrc
if it exists, or
/etc/jackdrc if it does not. If neither file exists, a
built-in default command will be used, including the
-T flag, which
causes the server to shut down when all clients have exited.
As a transition, this only happens when
$JACK_START_SERVER is defined in
the environment of the calling process. In the future this will become normal
behavior. In either case, defining
$JACK_NO_START_SERVER disables this
feature.
To change where JACK looks for the backend drivers, set
$JACK_DRIVER_DIR.
$JACK_DEFAULT_SERVER specifies the default server name. If not defined,
the string "default" is used. If set in their respective
environments, this affects
jackd unless its
--name parameter is
set, and all JACK clients unless they pass an explicit name to
jack_client_open().
SEE ALSO:¶
http://www.jackaudio.org
The official JACK website with news, docs and a list of JACK clients.
http://jackaudio.org/email
The JACK developers' mailing list. Subscribe, to take part in development of
JACK or JACK clients. User questions are also welcome, there is no
user-specific mailing list.
http://www.jackosx.com/
Tools specific to the Mac OS X version of JACK.
http://www.alsa-project.org
The Advanced Linux Sound Architecture.
BUGS¶
Please report bugs to
http://trac.jackaudio.org/
AUTHORS¶
Architect and original implementor: Paul Davis
Original design Group: Paul Davis, David Olofson, Kai Vehmanen, Benno Sennoner,
Richard Guenther, and other members of the Linux Audio Developers group.
Programming: Paul Davis, Jack O'Quin, Taybin Rutkin, Stephane Letz, Fernando
Pablo Lopez-Lezcano, Steve Harris, Jeremy Hall, Andy Wingo, Kai Vehmanen,
Melanie Thielker, Jussi Laako, Tilman Linneweh, Johnny Petrantoni, Torben
Hohn.
Manpage written by Stefan Schwandter, Jack O'Quin and Alexandre
Prokoudine.