.\" .\" $Id: proofd.1,v 1.3 2005/09/07 10:23:23 rdm Exp $ .\" .TH PROOFD 1 "Version 3" "ROOT" .\" NAME should be all caps, SECTION should be 1-8, maybe w/ subsection .\" other parms are allowed: see man(7), man(1) .SH NAME proofd \- PROOF (The Parallel ROOT Facility) .SH "DESCRIPTION" Using \fBPROOF\fI (The \fIP\fRarallel \fIROO\fRT \fIF\fRacility) one can analyze trees in parallel on a cluster of computers. The \fBPROOF\fR system consists of the \fIproofd\fR(1) from-end program which is started via \fIinetd\fR(8). .PP \fIproofd\fR takes care of user authentication and overlays itself then with the desired version of the \fIproofserv\fR(1) executable. .PP The \fIproofserv\fR(1) is a basically the same as the \fBROOT\fR interactive module \fIroot\fR(1), except that it reads its commands from a socket instead of from the terminal. .PP Since it is a remote server it will not do graphics and therefore is not linked with any graphics libraries (Motif, X11, etc.). .SH "SETTING UP PROOF" Since you need to handle sensitive system files, you need to have root (the user, not the program!) privileges. Also, it's recommended that you read the appropriate \fIman\fR(1) pages first. These are \fIinetd\fR(8) (the internet daemon), \fIsysklogd\fR(8) and \fIsyslog\fR(3) (the system logger daemon), and \fIinit\fR(8) (the SYSV process control initializer). .PP In other words: .RS .I Be very VERY carefull when installing \fBproofd\fR .RE There, I said it. And ofcourse, no warrenties what so ever. .TP 1 Make sure every node has \fBROOT\fR installed. We'll assume you installed the \fBROOT\fR applications in <\fIbindir\fR> (e.g. \fI/usr/bin\fR) and the \fBPROOF\fR configuration files in files in \fI/etc\fB (e.g. \fI/usr/share/root/etc\fB). .TP 2 The TCP port 1094 was allocated by \fBIANA\fR, ( .UR Iwww.iana.org \fIwww.iana.org\fR .UE ), to \fBrootd\fR, so add to \fI/etc/services\fR the lines: .nf proofd 1093/tcp rootd 1094/tcp .fi .TP 3 On each node, add to \fI/etc/inetd.conf\fR the lines: .nf proofd stream tcp nowait root <\fIbindir\fR>/proofd proofd <\fIproofdir\fR>/proof rootd stream tcp nowait root <\fIbindir\fR>/rootd rootd \-i .fi You can substitute the <\fIproofdir\fR> with any directory that holds your \fBPROOF\fR configuration, for example \fI/etc/root/proof\fR. However, it should be shared among all nodes in the cluster. .TP 4 Restart \fBinetd\fR or force it to re-read the config file: .nf kill \-1 <\fIinetd pid\fR> .fi If you use \fBSYSV\fR \fIinit\fR(8) scripts, you can probaly just do .nf /etc/init.d/inetd restart .fi or whatever is appropriate for your system. .TP 5 On the master node, add to \fI/etc/syslog.conf\fR the line: .nf local5,local6.debug <\fIproofdir\fR>/log/proof.log .fi and all slave nodes: .nf local5,local6.debug @<\fImaster hostname\fR> .fi where <\fImaster hostname\fR> is domain name of the master node. All PROOF syslog messages will be collected on the master node. Just make one node in the cluster the master, all others are slaves. .TP 6 On all nodes, change the below lines in \fI/etc/syslog.conf\fR, .nf *.info;mail.none;news.none;authpriv.none /var/log/messages .fi to: .nf *.info;local5,local6,mail.none;news.none;authpriv.none /var/log/messages .fi .TP 7 Create an empty <\fIproofdir\fR>/log/proof.log: .nf echo "" > <\fIproofdir\fR>/log/proof.log .fi .TP 8 Restart syslogd or force it to re-read the config file: .nf kill \-1 <\fIsyslogd pid\fR>. .fi If you use \fBSYSV\fR \fIinit\fR(8) scripts, you can probaly just do .nf /etc/init.d/sysklogd restart .fi or whatever is appropriate for your system. .TP 9 Edit <\fIproofdir\fR>\fI/etc/proof.conf\fR to reflect your cluster configuration. See the example \fIproof.conf\fR file for more information. .PP If you installed \fBROOT\fR using some precompiled package (for example a \fBRedhat Linux\fR or a \fBDebian GNU/Linux\fR package), steps 2 to 4 may already be done for you. .PP If you're running \fBLinux\fR, Steps 5 to 7 can be somewhat automated using the script \fIproof-facility\fR in <\fIproofdir\fR> of your distribution. This script uses \fIsyslog-facility\fR(1), from the \fBLinux\fR \fIsyslog\fR(1) distribution, and may run on other platforms as well \- but no warrenties mind you! .PP Step 9 is completely up to the user. .SH "EXAMPLE" That's it. To test PROOF try the following: .nf root [1] gROOT->Proof("<\fImaster hostname\fR>") root [2] gPROOF->Print() root [3] .q .fi .SH "FILES" .TP <\fIproofdir\fB> The location of your \fBPROOF\fI data. In binary packages, like for \fBRedhat Linux\fII or \fBDebian GNU/Linux\fR, this will probably be \fI/usr/share/root/proof\fB. If you got a binary \fItar\fR(1)-ball from the \fBROOT\fR website, or a build it yourself without the static paths option, then this directory could be ROOTSYS/proof. However, you may set it to something else when starting your server. .TP <\fIproofdir\fB>/etc\fR This directory holds all the configuration files for your cluster(s). .TP <\fIproofdir\fB>/etc/.conf\fR This is the cluster named <\fIcluster\fR> configuration file. See <\fIproofdir\fB>/etc/.conf.sample\fR for an example. .TP <\fIproofdir\fB>/etc/motd\fR This is Message-Of-The-Day file. See <\fIproofdir\fB>/etc/motd.sample\fR for an example. .TP <\fIproofdir\fB>/etc/noproof\fR If this file is present, all \fBPROOF\fR services will be diabled. See <\fIproofdir\fB>/etc/noproof.sample\fR for an example. .TP <\fIproofdir\fB>/etc/proof.conf\fR This is the \fBPROOF\fR configuration file. See <\fIproofdir\fB>/etc/proof.conf.sample\fR for an example. .TP \fB~/.rootnetrc.conf\fR Configuration file for network access. Here you specify login names and pass word, so it \fBMUST\fI be read/write-able only by the user. See <\fIproofdir\fB>/etc/rootnetrc.conf.sample\fR for an example. .TP <\fIproofdir\fB>/log\fR This directory holds the log files from the master and slaves. <\fIproofdir\fB>/log/proof.log\fR \fISyslog\fR(1) log file for \fBPROOF\fR. .SH "SEE ALSO" .IR proofserv (1) , .IR root (1) , .IR rootd (1) .PP More information can be found at the \fBROOT\fR website: .UR http://root.cern.ch \fIhttp://root.cern.ch\fB .UE .SH "ORIGINAL AUTHORS" The ROOT team (see web page above): .RS \fBRene Brun\fR and \fBFons Rademakers\fR .RE .SH "COPYRIGHT" This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. .P This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. .P You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA .SH AUTHOR This manual page was written by Christian Holm Christensen , for the Debian GNU/Linux system (but may be used by others). .\" .\" $Log: proofd.1,v $ .\" Revision 1.3 2005/09/07 10:23:23 rdm .\" From Christian Holm: .\" fixes for Debian packages (due to the license change ROOT can be moved .\" out of the non-free tree). Also updates in the man pages reflecting the .\" new license. .\" .\" Revision 1.2 2005/03/21 21:42:21 rdm .\" From Christian Holm Christensen: .\" * New Debian and RedHat rpm packaging scripts. .\" * Added a description to `build/package/debian/README.Debian' on .\" how to add a new package. It's not that complicated so it .\" should be a simple thing to add a new package, even for some .\" with little or no experience with RPMs or DEBs. .\" * When searching for the Oracle client libraries, I added the .\" directories `/usr/lib/oracle/*/client/lib' and .\" `/usr/include/oracle/*/client' - as these are the paths that the .\" RPMs install into. .\" * I added the packages `root-plugin-krb5' and .\" `root-plugin-oracle'. .\" * The library `libXMLIO' is in `libroot'. .\" * The package `root-plugin-xml' contains the XML parser. .\" * I fixed an cosmetic error in `build/misc/root.m4'. The .\" definition of `ROOT_PATH' should be quoted, otherwise aclocal .\" will complain. .\" * In the top-level `Makefile' I pass an additional argument to .\" `makecintdlls' - namely `$(ROOTCINTTMP)'. In `makecintdlls' I .\" use that argument to make the various dictionaries for .\" `lib...Dict.so'. Originally, the script used plain `rootcint'. .\" However, as `rootcint' may not be in the path yet, or the one in .\" the path may be old, this failed. Hence, I use what we know is .\" there - namely the newly build `rootcint_tmp'. BTW, what are .\" these shared libraries, and where do they belong? I guess they .\" are specific to ROOT, and not used by plain `CINT'. For now, I .\" put them in `libroot'. .\" * Made the two `virtual' packages `root-db-client' - provided the .\" DB plugins, and `root-fitter' provided by `root-plugin-minuit' .\" and `root-plugin-fumili'. Note, the virtual package .\" `root-file-server' provided by `root-rootd' and `root-xrootd' .\" already existed in the previous patch. .\" * Note, I added the directory `build/package/debian/po' which is .\" for translations of DebConf templates. DebConf is Debians very .\" advanced package configuration interface. It presents the user .\" with a set of questions in some sort of `GUI' based on how much .\" the user would like to change. These `dialogs' can be .\" translated quite easily. As an example, I translated the .\" questions used by the `ttf-root-installer' package into Danish. .\" I'm sure someone can translate them into German, French, .\" Italien, Spanish, and so on. .\" .\" Revision 1.1 2001/08/15 13:30:48 rdm .\" move man files to new subdir man1. This makes it possible to add .\" $ROOTSYS/man to MANPATH and have "man root" work. .\" .\" Revision 1.1 2000/12/08 17:41:00 rdm .\" man pages of all ROOT executables provided by Christian Holm. .\" .\"