NAME¶
Thread::Queue - Thread-safe queues
VERSION¶
This document describes Thread::Queue version 2.12
SYNOPSIS¶
use strict;
use warnings;
use threads;
use Thread::Queue;
my $q = Thread::Queue->new(); # A new empty queue
# Worker thread
my $thr = threads->create(sub {
while (my $item = $q->dequeue()) {
# Do work on $item
}
})->detach();
# Send work to the thread
$q->enqueue($item1, ...);
# Count of items in the queue
my $left = $q->pending();
# Non-blocking dequeue
if (defined(my $item = $q->dequeue_nb())) {
# Work on $item
}
# Get the second item in the queue without dequeuing anything
my $item = $q->peek(1);
# Insert two items into the queue just behind the head
$q->insert(1, $item1, $item2);
# Extract the last two items on the queue
my ($item1, $item2) = $q->extract(-2, 2);
DESCRIPTION¶
This module provides thread-safe FIFO queues that can be accessed safely by any
number of threads.
Any data types supported by threads::shared can be passed via queues:
- Ordinary scalars
- Array refs
- Hash refs
- Scalar refs
- Objects based on the above
Ordinary scalars are added to queues as they are.
If not already thread-shared, the other complex data types will be cloned
(recursively, if needed, and including any "bless"ings and read-only
settings) into thread-shared structures before being placed onto a queue.
For example, the following would cause Thread::Queue to create a empty, shared
array reference via "&shared([])", copy the elements 'foo',
'bar' and 'baz' from @ary into it, and then place that shared reference onto
the queue:
my @ary = qw/foo bar baz/;
$q->enqueue(\@ary);
However, for the following, the items are already shared, so their references
are added directly to the queue, and no cloning takes place:
my @ary :shared = qw/foo bar baz/;
$q->enqueue(\@ary);
my $obj = &shared({});
$$obj{'foo'} = 'bar';
$$obj{'qux'} = 99;
bless($obj, 'My::Class');
$q->enqueue($obj);
See "LIMITATIONS" for caveats related to passing objects via queues.
QUEUE CREATION¶
- ->new()
- Creates a new empty queue.
- ->new(LIST)
- Creates a new queue pre-populated with the provided list of
items.
BASIC METHODS¶
The following methods deal with queues on a FIFO basis.
- ->enqueue(LIST)
- Adds a list of items onto the end of the queue.
- ->dequeue()
- ->dequeue(COUNT)
- Removes the requested number of items (default is 1) from
the head of the queue, and returns them. If the queue contains fewer than
the requested number of items, then the thread will be blocked until the
requisite number of items are available (i.e., until other threads
<enqueue> more items).
- ->dequeue_nb()
- ->dequeue_nb(COUNT)
- Removes the requested number of items (default is 1) from
the head of the queue, and returns them. If the queue contains fewer than
the requested number of items, then it immediately (i.e., non-blocking)
returns whatever items there are on the queue. If the queue is empty, then
"undef" is returned.
- ->pending()
- Returns the number of items still in the queue.
ADVANCED METHODS¶
The following methods can be used to manipulate items anywhere in a queue.
To prevent the contents of a queue from being modified by another thread while
it is being examined and/or changed, lock the queue inside a local block:
{
lock($q); # Keep other threads from changing the queue's contents
my $item = $q->peek();
if ($item ...) {
...
}
}
# Queue is now unlocked
- ->peek()
- ->peek(INDEX)
- Returns an item from the queue without dequeuing anything.
Defaults to the the head of queue (at index position 0) if no index is
specified. Negative index values are supported as with arrays (i.e., -1 is
the end of the queue, -2 is next to last, and so on).
If no items exists at the specified index (i.e., the queue is empty, or the
index is beyond the number of items on the queue), then "undef"
is returned.
Remember, the returned item is not removed from the queue, so manipulating a
"peek"ed at reference affects the item on the queue.
- ->insert(INDEX, LIST)
- Adds the list of items to the queue at the specified index
position (0 is the head of the list). Any existing items at and beyond
that position are pushed back past the newly added items:
$q->enqueue(1, 2, 3, 4);
$q->insert(1, qw/foo bar/);
# Queue now contains: 1, foo, bar, 2, 3, 4
Specifying an index position greater than the number of items in the queue
just adds the list to the end.
Negative index positions are supported:
$q->enqueue(1, 2, 3, 4);
$q->insert(-2, qw/foo bar/);
# Queue now contains: 1, 2, foo, bar, 3, 4
Specifying a negative index position greater than the number of items in the
queue adds the list to the head of the queue.
- ->extract()
- ->extract(INDEX)
- ->extract(INDEX, COUNT)
- Removes and returns the specified number of items (defaults
to 1) from the specified index position in the queue (0 is the head of the
queue). When called with no arguments, "extract" operates the
same as "dequeue_nb".
This method is non-blocking, and will return only as many items as are
available to fulfill the request:
$q->enqueue(1, 2, 3, 4);
my $item = $q->extract(2) # Returns 3
# Queue now contains: 1, 2, 4
my @items = $q->extract(1, 3) # Returns (2, 4)
# Queue now contains: 1
Specifying an index position greater than the number of items in the queue
results in "undef" or an empty list being returned.
$q->enqueue('foo');
my $nada = $q->extract(3) # Returns undef
my @nada = $q->extract(1, 3) # Returns ()
Negative index positions are supported. Specifying a negative index position
greater than the number of items in the queue may return items from the
head of the queue (similar to "dequeue_nb") if the count
overlaps the head of the queue from the specified position (i.e. if queue
size + index + count is greater than zero):
$q->enqueue(qw/foo bar baz/);
my @nada = $q->extract(-6, 2); # Returns () - (3+(-6)+2) <= 0
my @some = $q->extract(-6, 4); # Returns (foo) - (3+(-6)+4) > 0
# Queue now contains: bar, baz
my @rest = $q->extract(-3, 4); # Returns (bar, baz) - (2+(-3)+4) > 0
NOTES¶
Queues created by Thread::Queue can be used in both threaded and non-threaded
applications.
LIMITATIONS¶
Passing objects on queues may not work if the objects' classes do not support
sharing. See "BUGS AND LIMITATIONS" in threads::shared for more.
Passing array/hash refs that contain objects may not work for Perl prior to
5.10.0.
SEE ALSO¶
Thread::Queue Discussion Forum on CPAN:
http://www.cpanforum.com/dist/Thread-Queue
<
http://www.cpanforum.com/dist/Thread-Queue>
threads, threads::shared
MAINTAINER¶
Jerry D. Hedden, <jdhedden AT cpan DOT org>
LICENSE¶
This program is free software; you can redistribute it and/or modify it under
the same terms as Perl itself.