table of contents
other sections
ATOMIC(9) | Kernel Developer's Manual | ATOMIC(9) |
NAME¶
atomic_add, atomic_clear, atomic_cmpset, atomic_fetchadd, atomic_load, atomic_readandclear, atomic_set, atomic_subtract, atomic_store — atomic operationsSYNOPSIS¶
#include <sys/types.h>#include <machine/atomic.h> void
atomic_add_[acq_|rel_]<type>(volatile <type> *p, <type> v); void
atomic_clear_[acq_|rel_]<type>(volatile <type> *p, <type> v); int
atomic_cmpset_[acq_|rel_]<type>(volatile <type> *dst, <type> old, <type> new); <type>
atomic_fetchadd_<type>(volatile <type> *p, <type> v); <type>
atomic_load_acq_<type>(volatile <type> *p); <type>
atomic_readandclear_<type>(volatile <type> *p); void
atomic_set_[acq_|rel_]<type>(volatile <type> *p, <type> v); void
atomic_subtract_[acq_|rel_]<type>(volatile <type> *p, <type> v); void
atomic_store_rel_<type>(volatile <type> *p, <type> v);
DESCRIPTION¶
Each of the atomic operations is guaranteed to be atomic in the presence of interrupts. They can be used to implement reference counts or as building blocks for more advanced synchronization primitives such as mutexes.Types¶
Each atomic operation operates on a specific type. The type to use is indicated in the function name. The available types that can be used are:int
- unsigned integer
long
- unsigned long integer
ptr
- unsigned integer the size of a pointer
32
- unsigned 32-bit integer
64
- unsigned 64-bit integer
int
”.
char
- unsigned character
short
- unsigned short integer
8
- unsigned 8-bit integer
16
- unsigned 16-bit integer
Memory Barriers¶
Memory barriers are used to guarantee the order of data accesses in two ways. First, they specify hints to the compiler to not re-order or optimize the operations. Second, on architectures that do not guarantee ordered data accesses, special instructions or special variants of instructions are used to indicate to the processor that data accesses need to occur in a certain order. As a result, most of the atomic operations have three variants in order to include optional memory barriers. The first form just performs the operation without any explicit barriers. The second form uses a read memory barrier, and the third variant uses a write memory barrier. The second variant of each operation includes a read memory barrier. This barrier ensures that the effects of this operation are completed before the effects of any later data accesses. As a result, the operation is said to have acquire semantics as it acquires a pseudo-lock requiring further operations to wait until it has completed. To denote this, the suffix “_acq
” is inserted into the function name
immediately prior to the
“_
⟨type⟩”
suffix. For example, to subtract two integers ensuring that any later writes
will happen after the subtraction is performed, use
atomic_subtract_acq_int().
The third variant of each operation includes a write memory barrier. This
ensures that all effects of all previous data accesses are completed before
this operation takes place. As a result, the operation is said to have release
semantics as it releases any pending data accesses to be completed before its
operation is performed. To denote this, the suffix
“_rel
” is inserted into the function name
immediately prior to the
“_
⟨type⟩”
suffix. For example, to add two long integers ensuring that all previous
writes will happen first, use atomic_add_rel_long().
A practical example of using memory barriers is to ensure that data accesses
that are protected by a lock are all performed while the lock is held. To
achieve this, one would use a read barrier when acquiring the lock to
guarantee that the lock is held before any protected operations are performed.
Finally, one would use a write barrier when releasing the lock to ensure that
all of the protected operations are completed before the lock is released.
Multiple Processors¶
The current set of atomic operations do not necessarily guarantee atomicity across multiple processors. To guarantee atomicity across processors, not only does the individual operation need to be atomic on the processor performing the operation, but the result of the operation needs to be pushed out to stable storage and the caches of all other processors on the system need to invalidate any cache lines that include the affected memory region. On the i386 architecture, the cache coherency model requires that the hardware perform this task, thus the atomic operations are atomic across multiple processors. On the ia64 architecture, coherency is only guaranteed for pages that are configured to using a caching policy of either uncached or write back.Semantics¶
This section describes the semantics of each operation using a C like notation.- atomic_add(p, v)
-
*p += v;
- atomic_clear(p, v)
-
*p &= ~v;
- atomic_cmpset(dst, old, new)
-
if (*dst == old) { *dst = new; return 1; } else return 0;
char
”,
“short
”,
“8
”, and
“16
”.
- atomic_fetchadd(p, v)
-
tmp = *p; *p += v; return tmp;
int
”,
“long
” and
“32
” and do not have any variants with
memory barriers at this time.
- atomic_load(addr)
-
return (*addr)
- atomic_readandclear(addr)
-
temp = *addr; *addr = 0; return (temp);
char
”,
“short
”,
“ptr
”,
“8
”, and
“16
” and do not have any variants with
memory barriers at this time.
- atomic_set(p, v)
-
*p |= v;
- atomic_subtract(p, v)
-
*p -= v;
- atomic_store(p, v)
-
*p = v;
64
” is currently not implemented
for any of the atomic operations on the arm, i386, and powerpc architectures.
RETURN VALUES¶
The atomic_cmpset() function returns the result of the compare operation. The atomic_fetchadd(), atomic_load(), and atomic_readandclear() functions return the value at the specified address.EXAMPLES¶
This example uses the atomic_cmpset_acq_ptr() and atomic_set_ptr() functions to obtain a sleep mutex and handle recursion. Since the mtx_lock member of a struct mtx is a pointer, the “ptr
” type is used.
/* Try to obtain mtx_lock once. */ #define _obtain_lock(mp, tid) \ atomic_cmpset_acq_ptr(&(mp)->mtx_lock, MTX_UNOWNED, (tid)) /* Get a sleep lock, deal with recursion inline. */ #define _get_sleep_lock(mp, tid, opts, file, line) do { \ uintptr_t _tid = (uintptr_t)(tid); \ \ if (!_obtain_lock(mp, tid)) { \ if (((mp)->mtx_lock & MTX_FLAGMASK) != _tid) \ _mtx_lock_sleep((mp), _tid, (opts), (file), (line));\ else { \ atomic_set_ptr(&(mp)->mtx_lock, MTX_RECURSE); \ (mp)->mtx_recurse++; \ } \ } \ } while (0)
HISTORY¶
The atomic_add(), atomic_clear(), atomic_set(), and atomic_subtract() operations were first introduced in FreeBSD 3.0. This first set only supported the types “char
”,
“short
”,
“int
”, and
“long
”. The
atomic_cmpset(), atomic_load(),
atomic_readandclear(), and atomic_store()
operations were added in FreeBSD 5.0. The types
“8
”,
“16
”,
“32
”,
“64
”, and
“ptr
” and all of the acquire and release
variants were added in FreeBSD 5.0 as well. The
atomic_fetchadd() operations were added in
FreeBSD 6.0.September 27, 2005 | Debian |