.\"
.\" "$Id: cups-snmp.conf.man 9771 2011-05-12 05:21:56Z mike $"
.\"
.\"   snmp.conf man page for CUPS.
.\"
.\"   Copyright 2007-2011 by Apple Inc.
.\"   Copyright 2006 by Easy Software Products.
.\"
.\"   These coded instructions, statements, and computer programs are the
.\"   property of Apple Inc. and are protected by Federal copyright
.\"   law.  Distribution and use rights are outlined in the file "LICENSE.txt"
.\"   which should have been included with this file.  If this file is
.\"   file is missing or damaged, see the license at "http://www.cups.org/".
.\"
.TH snmp.conf 5 "CUPS" "31 July 2006" "Apple Inc."
.SH NAME
snmp.conf \- snmp configuration file for cups
.SH DESCRIPTION
The \fIsnmp.conf\fR file configures the CUPS SNMP printer
discovery backend and is  normally located in the \fI/etc/cups\fR
directory. Each line in the file can be a configuration
directive, a blank line, or a comment. Comment lines start with
the # character.
.LP
The SNMP backend uses the SNMPv1 protocol to discover network
printers, collecting information from the Host MIB along with
intelligent port probes to determine the correct device URI and
make and model for each printer. Future versions of CUPS will
likely support the new Port Monitor MIB as well.
.SH DIRECTIVES
The following directives are understood by the SNMP backend.
Consult the on-line help for detailed descriptions:
.TP 5
Address @IF(\fIname\fR)
.TP 5
Address @LOCAL
.TP 5
Address \fIaddress\fR
.br
Sends SNMP broadcast queries to the specified address(es). The
default address is "@LOCAL" which broadcasts to all LAN
interfaces.
.TP 5
Community \fIname\fR
.br
Specifies a SNMP community to query. The default community is
"public".
.TP 5
DebugLevel \fIN\fR
.br
Sets the debug logging level to \fIN\fR; 0 disables debug
logging, 1 enables basic logging, 2 displays SNMP values, and 3
displays raw hex data.
.TP 5
HostNameLookups on
.TP 5
HostNameLookups off
.br
Specifies whether the addresses of printers should be converted
to hostnames or left as numeric IP addresses. The default is
"off".
.TP 5
MaxRunTime \fIseconds\fR
.br
Specifies the maximum number of seconds that the SNMP backend
will scan the network for printers.
.SH SEE ALSO
http://localhost:631/help
.SH COPYRIGHT
Copyright 2007-2011 by Apple Inc.
.\"
.\" End of "$Id: cups-snmp.conf.man 9771 2011-05-12 05:21:56Z mike $".
.\"