'\"
'\" Copyright (c) 2004 Joe English
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH ttk::widget 3tk 8.5 Tk "Tk Themed Widget"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OOP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
ttk::widget \- Standard options and commands supported by Tk themed widgets
.BE
.SH DESCRIPTION
This manual describes common widget options and commands.
.SH "STANDARD OPTIONS"
The following options are supported by all Tk themed widgets:
.OOP \-class undefined undefined
Specifies the window class.
The class is used when querying the option database
for the window's other options, to determine the default
bindtags for the window, and to select the widget's default
layout and style.
This is a read-only option:
it may only be specified when the window is created,
and may not be changed with the \fBconfigure\fR widget command.
.OOP \-cursor cursor Cursor
Specifies the mouse cursor to be used for the widget.
See \fBTk_GetCursor\fR and \fIcursors(3tk)\fR in the Tk reference manual
for the legal values.
If set to the empty string (the default),
the cursor is inherited from the parent widget.
.OOP \-takefocus takeFocus TakeFocus
Determines whether the window accepts the focus during keyboard traversal.
Either \fB0\fR, \fB1\fR, a command prefix (to which the widget path
is appended, and which should return \fB0\fR or \fB1\fR),
or the empty string.
See \fIoptions(3tk)\fR in the Tk reference manual for the full description.
.OOP \-style style Style
May be used to specify a custom widget style.
.SH "SCROLLABLE WIDGET OPTIONS"
The following options are supported by widgets that
are controllable by a scrollbar.
See \fIscrollbar(3tk)\fR for more information
.OOP \-xscrollcommand xScrollCommand ScrollCommand
A command prefix, used to communicate with horizontal scrollbars.
.RS
When the view in the widget's window changes, the widget will
generate a Tcl command by concatenating the scroll command and
two numbers.
Each of the numbers is a fraction between 0 and 1 indicating
a position in the document; 0 indicates the beginning,
and 1 indicates the end.
The first fraction indicates the first information in the widget
that is visible in the window, and the second fraction indicates
the information just after the last portion that is visible.
.PP
Typically the \fB\-xscrollcommand\fR option consists of the path name
of a \fBscrollbar\fR widget followed by
.QW set ,
e.g.
.QW ".x.scrollbar set" .
This will cause the scrollbar to be updated whenever the view in the
window changes.
.PP
If this option is set to the empty string (the default),
then no command will be executed.
.RE
.OOP \-yscrollcommand yScrollCommand ScrollCommand
A command prefix, used to communicate with vertical scrollbars.
See the description of \fB\-xscrollcommand\fR above for details.
.SH "LABEL OPTIONS"
The following options are supported by labels, buttons,
and other button-like widgets:
.OOP \-compound compound Compound
Specifies how to display the image relative to the text,
in the case both \fB\-text\fR and \fB\-image\fR are present.
If set to the empty string (the default), the rules described in the
"Elements" section of \fIttk::intro(3tk)\fR explain which value is actually
used.
The other valid values are:
.RS
.IP text
Display text only.
.IP image
Display image only.
.IP center
Display text centered on top of image.
.IP top
.IP bottom
.IP left
.IP right
Display image above, below, left of, or right of the text, respectively.
.IP none
Display the image if present, otherwise the text.
.RE
.OOP \-font font Font
Font to use for the text displayed by the widget.
.OOP \-foreground textColor TextColor
The widget's foreground color.
If unspecified, the theme default is used.
.OOP \-image image Image
Specifies an image to display.
This is a list of 1 or more elements.
The first element is the default image name.
The rest of the list is a sequence of \fIstatespec / value\fR pairs
as per \fBstyle map\fR, specifying different images to use when
the widget is in a particular state or combination of states.
All images in the list should have the same size.
.OOP \-padding padding Padding
Specifies the internal padding for the widget.
The padding is a list of up to four length specifications
\fIleft top right bottom\fR.
If fewer than four elements are specified,
\fIbottom\fR defaults to \fItop\fR,
\fIright\fR defaults to \fIleft\fR, and
\fItop\fR defaults to \fIleft\fR.
In other words, a list of three numbers specify the left, vertical, and right padding;
a list of two numbers specify the horizontal and the vertical padding;
a single number specifies the same padding all the way around the widget.
.OOP \-text text Text
Specifies a text string to be displayed inside the widget
(unless overridden by \fB\-textvariable\fR).
.OOP \-textvariable textVariable Variable
Specifies the name of a global variable whose value will be used
in place of the \fB\-text\fR resource.
.OOP \-underline underline Underline
If set, specifies the integer index (0-based) of a character to underline
in the text string.
The underlined character is used for mnemonic activation.
.OOP \-width width Width
If greater than zero, specifies how much space, in character widths,
to allocate for the text label.
If less than zero, specifies a minimum width.
If zero or unspecified, the natural width of the text label is used.
.SH "COMPATIBILITY OPTIONS"
This option is only available for themed widgets that have
.QW corresponding
traditional Tk widgets.
.OOP \-state state State
May be set to \fBnormal\fR or \fBdisabled\fR
to control the \fBdisabled\fR state bit.
This is a write-only option:
setting it changes the widget state,
but the \fBstate\fR widget command
does not affect the \fB\-state\fR option.
.SH COMMANDS
.TP
\fIpathName \fBcget \fIoption\fR
.
Returns the current value of the configuration option given
by \fIoption\fR.
.TP
\fIpathName \fBconfigure\fR ?\fIoption\fR? ?\fIvalue option value ...\fR?
.
Query or modify the configuration options of the widget.
If one or more \fIoption\-value\fR pairs are specified,
then the command modifies the given widget option(s)
to have the given value(s);
in this case the command returns an empty string.
If \fIoption\fR is specified with no \fIvalue\fR,
then the command returns a list describing the named option:
the elements of the list are the
option name, database name, database class, default value,
and current value.
.\" Note: Ttk widgets don't use TK_OPTION_SYNONYM.
If no \fIoption\fR is specified, returns a list describing all of
the available options for \fIpathName\fR.
.TP
\fIpathName \fBidentify element \fIx y\fR
.
Returns the name of the element under the point given
by \fIx\fR and \fIy\fR, or an empty string if the point does
not lie within any element.
\fIx\fR and \fIy\fR are pixel coordinates relative to the widget.
Some widgets accept other \fBidentify\fR subcommands.
.TP
\fIpathName \fBinstate \fIstatespec\fR ?\fIscript\fR?
.
Test the widget's state.
If \fIscript\fR is not specified, returns 1 if
the widget state matches \fIstatespec\fR and 0 otherwise.
If \fIscript\fR is specified, equivalent to
.CS
if {[\fIpathName\fR instate \fIstateSpec\fR]} \fIscript\fR
.CE
.TP
\fIpathName \fBstate\fR ?\fIstateSpec\fR?
.
Modify or inquire widget state.
If \fIstateSpec\fR is present, sets the widget state:
for each flag in \fIstateSpec\fR, sets the corresponding flag
or clears it if prefixed by an exclamation point.
.RS
Returns a new state spec indicating which flags were changed:
.CS
set changes [\fIpathName \fRstate \fIspec\fR]
\fIpathName \fRstate $changes
.CE
will restore \fIpathName\fR to the original state.
If \fIstateSpec\fR is not specified,
returns a list of the currently-enabled state flags.
.RE
.TP
\fIpathName \fBxview \fIargs\fR
This command is used to query and change the horizontal position of the
content in the widget's window.  It can take any of the following
forms:
.RS
.TP
\fIpathName \fBxview\fR
Returns a list containing two elements.
Each element is a real fraction between 0 and 1; together they describe
the horizontal span that is visible in the window.
For example, if the first element is .2 and the second element is .6,
20% of the widget's content is off-screen to the left, the middle 40% is visible
in the window, and 40% of the content is off-screen to the right.
These are the same values passed to scrollbars via the \fB\-xscrollcommand\fR
option.
.TP
\fIpathName \fBxview\fR \fIindex\fR
Adjusts the view in the window so that the content given by \fIindex\fR
is displayed at the left edge of the window.
.TP
\fIpathName \fBxview moveto\fI fraction\fR
Adjusts the view in the window so that the character \fIfraction\fR of the
way through the content appears at the left edge of the window.
\fIFraction\fR must be a fraction between 0 and 1.
.TP
\fIpathName \fBxview scroll \fInumber what\fR
This command shifts the view in the window left or right according to
\fInumber\fR and \fIwhat\fR.
\fINumber\fR must be an integer.
\fIWhat\fR must be either \fBunits\fR or \fBpages\fR.
'\" or an abbreviation of one of these, but we don't document that.
If \fIwhat\fR is \fBunits\fR, the view adjusts left or right by
\fInumber\fR average-width characters on the display;  if it is
\fBpages\fR then the view adjusts by \fInumber\fR screenfuls.
If \fInumber\fR is negative then characters farther to the left
become visible;  if it is positive then characters farther to the right
become visible.
.RE
.TP
\fIpathName \fByview \fIargs\fR
This command is used to query and change the vertical position of the
content in the widget's window.  It can take any of the following
forms:
.RS
.TP
\fIpathName \fByview\fR
Returns a list containing two elements.
Each element is a real fraction between 0 and 1; together they describe
the vertical span that is visible in the window.
For example, if the first element is .2 and the second element is .6,
20% of the widget's content is off-screen to the top, the middle 40% is visible
in the window, and 40% of the content is off-screen to the bottom.
These are the same values passed to scrollbars via the \fB\-yscrollcommand\fR
option.
.TP
\fIpathName \fByview\fR \fIindex\fR
Adjusts the view in the window so that the content given by \fIindex\fR
is displayed at the top edge of the window.
.TP
\fIpathName \fByview moveto\fI fraction\fR
Adjusts the view in the window so that the item \fIfraction\fR of the
way through the content appears at the top edge of the window.
\fIFraction\fR must be a fraction between 0 and 1.
.TP
\fIpathName \fByview scroll \fInumber what\fR
This command shifts the view in the window up or down according to
\fInumber\fR and \fIwhat\fR.
\fINumber\fR must be an integer.
\fIWhat\fR must be either \fBunits\fR or \fBpages\fR.
'\" or an abbreviation of one of these, but we don't document that.
If \fIwhat\fR is \fBunits\fR, the view adjusts up or down by
\fInumber\fR average-width characters on the display;  if it is
\fBpages\fR then the view adjusts by \fInumber\fR screenfuls.
If \fInumber\fR is negative then items farther to the top
become visible;  if it is positive then items farther to the bottom
become visible.
.RE
.SH "WIDGET STATES"
The widget state is a bitmap of independent state flags.
Widget state flags include:
.TP
\fBactive\fR
.
The mouse cursor is over the widget
and pressing a mouse button will cause some action to occur. (aka
.QW prelight
(Gnome),
.QW hot
(Windows),
.QW hover ).
.TP
\fBdisabled\fR
.
Widget is disabled under program control (aka
.QW unavailable ,
.QW inactive ).
.TP
\fBfocus\fR
.
Widget has keyboard focus.
.TP
\fBpressed\fR
.
Widget is being pressed (aka
.QW armed
in Motif).
.TP
\fBselected\fR
.
.QW On ,
.QW true ,
or
.QW current
for things like checkbuttons and radiobuttons.
.TP
\fBbackground\fR
.
Windows and the Mac have a notion of an
.QW active
or foreground window.
The \fBbackground\fR state is set for widgets in a background window,
and cleared for those in the foreground window.
.TP
\fBreadonly\fR
.
Widget should not allow user modification.
.TP
\fBalternate\fR
.
A widget-specific alternate display format.
For example, used for checkbuttons and radiobuttons in the
.QW tristate
or
.QW mixed
state, and for buttons with \fB\-default active\fR.
.TP
\fBinvalid\fR
.
The widget's value is invalid.
(Potential uses: scale widget value out of bounds,
entry widget value failed validation.)
.TP
\fBhover\fR
.
The mouse cursor is within the widget.
This is similar to the \fBactive\fP state;
it is used in some themes for widgets that
provide distinct visual feedback for
the active widget in addition to the active element
within the widget.
.PP
A \fIstate specification\fR or \fIstateSpec\fR is a list
of state names, optionally prefixed with an exclamation point (!)
indicating that the bit is off.
.SH EXAMPLES
.CS
set b [ttk::button .b]

# Disable the widget:
$b \fBstate\fR disabled

# Invoke the widget only if it is currently pressed and enabled:
$b \fBinstate\fR {pressed !disabled} { .b invoke }

# Reenable widget:
$b \fBstate\fR !disabled
.CE
.SH "SEE ALSO"
ttk::intro(3tk), ttk::style(3tk)
.SH KEYWORDS
state, configure, option
'\" Local Variables:
'\" mode: nroff
'\" End: