'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\" Copyright (c) 1999 Scriptics Corporation
'\" Copyright (c) 2001 Kevin B. Kenny <kennykb@acm.org>.  All rights reserved.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH lsort 3tcl 8.5 Tcl "Tcl Built-In Commands"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
lsort \- Sort the elements of a list
.SH SYNOPSIS
\fBlsort \fR?\fIoptions\fR? \fIlist\fR
.BE
.SH DESCRIPTION
.PP
This command sorts the elements of \fIlist\fR, returning a new
list in sorted order.  The implementation of the \fBlsort\fR command
uses the merge\-sort algorithm which is a stable sort that has O(n log
n) performance characteristics.
.PP
By default ASCII sorting is used with the result returned in
increasing order.  However, any of the following options may be
specified before \fIlist\fR to control the sorting process (unique
abbreviations are accepted):
.TP
\fB\-ascii\fR
.
Use string comparison with Unicode code-point collation order (the
name is for backward-compatibility reasons.)  This is the default.
.TP
\fB\-dictionary\fR
.
Use dictionary-style comparison.  This is the same as \fB\-ascii\fR
except (a) case is ignored except as a tie-breaker and (b) if two
strings contain embedded numbers, the numbers compare as integers,
not characters.  For example, in \fB\-dictionary\fR mode, \fBbigBoy\fR
sorts between \fBbigbang\fR and \fBbigboy\fR, and \fBx10y\fR
sorts between \fBx9y\fR and \fBx11y\fR. Overrides the \fB\-nocase\fR
option.
.TP
\fB\-integer\fR
.
Convert list elements to integers and use integer comparison.
.TP
\fB\-real\fR
.
Convert list elements to floating-point values and use floating comparison.
.TP
\fB\-command\0\fIcommand\fR
.
Use \fIcommand\fR as a comparison command.
To compare two elements, evaluate a Tcl script consisting of
\fIcommand\fR with the two elements appended as additional
arguments.  The script should return an integer less than,
equal to, or greater than zero if the first element is to
be considered less than, equal to, or greater than the second,
respectively.
.TP
\fB\-increasing\fR
.
Sort the list in increasing order
.PQ smallest "items first" .
This is the default.
.TP
\fB\-decreasing\fR
.
Sort the list in decreasing order
.PQ largest "items first" .
.TP
\fB\-indices\fR
.
Return a list of indices into \fIlist\fR in sorted order instead of
the values themselves.
.TP
\fB\-index\0\fIindexList\fR
.
If this option is specified, each of the elements of \fIlist\fR must
itself be a proper Tcl sublist (unless \fB\-stride\fR is used).
Instead of sorting based on whole sublists, \fBlsort\fR will extract
the \fIindexList\fR'th element from each sublist (as if the overall
element and the \fIindexList\fR were passed to \fBlindex\fR) and sort
based on the given element.
For example,
.RS
.PP
.CS
\fBlsort\fR -integer -index 1 \e
      {{First 24} {Second 18} {Third 30}}
.CE
.PP
returns \fB{Second 18} {First 24} {Third 30}\fR,
.PP
'\"
'\" This example is from the test suite!
'\"
.CS
\fBlsort\fR -index end-1 \e
        {{a 1 e i} {b 2 3 f g} {c 4 5 6 d h}}
.CE
.PP
returns \fB{c 4 5 6 d h} {a 1 e i} {b 2 3 f g}\fR,
and
.PP
.CS
\fBlsort\fR -index {0 1} {
    {{b i g} 12345}
    {{d e m o} 34512}
    {{c o d e} 54321}
}
.CE
.PP
returns \fB{{d e m o} 34512} {{b i g} 12345} {{c o d e} 54321}\fR
(because \fBe\fR sorts before \fBi\fR which sorts before \fBo\fR.)
This option is much more efficient than using \fB\-command\fR
to achieve the same effect.
.RE
.TP
\fB\-stride\0\fIstrideLength\fR
.
If this option is specified, the list is treated as consisting of
groups of \fIstrideLength\fR elements and the groups are sorted by
either their first element or, if the \fB\-index\fR option is used,
by the element within each group given by the first index passed to
\fB\-index\fR (which is then ignored by \fB\-index\fR). Elements
always remain in the same position within their group.
.RS
.PP
The list length must be an integer multiple of \fIstrideLength\fR, which
in turn must be at least 2.
.PP
For example,
.PP
.CS
\fBlsort\fR \-stride 2 {carrot 10 apple 50 banana 25}
.CE
.PP
returns
.QW "apple 50 banana 25 carrot 10" ,
and
.PP
.CS
\fBlsort\fR \-stride 2 \-index 1 \-integer {carrot 10 apple 50 banana 25}
.CE
.PP
returns
.QW "carrot 10 banana 25 apple 50" .
.RE
.TP
\fB\-nocase\fR
.
Causes comparisons to be handled in a case-insensitive manner.  Has no
effect if combined with the \fB\-dictionary\fR, \fB\-integer\fR, or
\fB\-real\fR options.
.TP
\fB\-unique\fR
.
If this option is specified, then only the last set of duplicate
elements found in the list will be retained.  Note that duplicates are
determined relative to the comparison used in the sort.  Thus if
\fB\-index 0\fR is used, \fB{1 a}\fR and \fB{1 b}\fR would be
considered duplicates and only the second element, \fB{1 b}\fR, would
be retained.
.SH "NOTES"
.PP
The options to \fBlsort\fR only control what sort of comparison is
used, and do not necessarily constrain what the values themselves
actually are.  This distinction is only noticeable when the list to be
sorted has fewer than two elements.
.PP
The \fBlsort\fR command is reentrant, meaning it is safe to use as
part of the implementation of a command used in the \fB\-command\fR
option.
.SH "EXAMPLES"
.PP
Sorting a list using ASCII sorting:
.PP
.CS
\fI%\fR \fBlsort\fR {a10 B2 b1 a1 a2}
B2 a1 a10 a2 b1
.CE
.PP
Sorting a list using Dictionary sorting:
.PP
.CS
\fI%\fR \fBlsort\fR -dictionary {a10 B2 b1 a1 a2}
a1 a2 a10 b1 B2
.CE
.PP
Sorting lists of integers:
.PP
.CS
\fI%\fR \fBlsort\fR -integer {5 3 1 2 11 4}
1 2 3 4 5 11
\fI%\fR \fBlsort\fR -integer {1 2 0x5 7 0 4 -1}
-1 0 1 2 4 0x5 7
.CE
.PP
Sorting lists of floating-point numbers:
.PP
.CS
\fI%\fR \fBlsort\fR -real {5 3 1 2 11 4}
1 2 3 4 5 11
\fI%\fR \fBlsort\fR -real {.5 0.07e1 0.4 6e-1}
0.4 .5 6e-1 0.07e1
.CE
.PP
Sorting using indices:
.PP
.CS
\fI%\fR # Note the space character before the c
\fI%\fR \fBlsort\fR {{a 5} { c 3} {b 4} {e 1} {d 2}}
{ c 3} {a 5} {b 4} {d 2} {e 1}
\fI%\fR \fBlsort\fR -index 0 {{a 5} { c 3} {b 4} {e 1} {d 2}}
{a 5} {b 4} { c 3} {d 2} {e 1}
\fI%\fR \fBlsort\fR -index 1 {{a 5} { c 3} {b 4} {e 1} {d 2}}
{e 1} {d 2} { c 3} {b 4} {a 5}
.CE
.PP
.VS 8.6
Sorting a dictionary:
.PP
.CS
\fI%\fR set d [dict create c d a b h i f g c e]
c e a b h i f g
\fI%\fR \fBlsort\fR -stride 2 $d
a b c e f g h i
.CE
.PP
Sorting using striding and multiple indices:
.PP
.CS
\fI%\fR # Note the first index value is relative to the group
\fI%\fR \fBlsort\fR \-stride 3 \-index {0 1} \e
     {{Bob Smith} 25 Audi {Jane Doe} 40 Ford}
{{Jane Doe} 40 Ford {Bob Smith} 25 Audi}
.CE
.VE 8.6
.PP
Stripping duplicate values using sorting:
.PP
.CS
\fI%\fR \fBlsort\fR -unique {a b c a b c a b c}
a b c
.CE
.PP
More complex sorting using a comparison function:
.PP
.CS
\fI%\fR proc compare {a b} {
    set a0 [lindex $a 0]
    set b0 [lindex $b 0]
    if {$a0 < $b0} {
        return -1
    } elseif {$a0 > $b0} {
        return 1
    }
    return [string compare [lindex $a 1] [lindex $b 1]]
}
\fI%\fR \fBlsort\fR -command compare \e
        {{3 apple} {0x2 carrot} {1 dingo} {2 banana}}
{1 dingo} {2 banana} {0x2 carrot} {3 apple}
.CE
.SH "SEE ALSO"
list(3tcl), lappend(3tcl), lindex(3tcl), linsert(3tcl), llength(3tcl), lsearch(3tcl),
lset(3tcl), lrange(3tcl), lreplace(3tcl)
.SH KEYWORDS
element, list, order, sort
'\" Local Variables:
'\" mode: nroff
'\" End: