.\" Copyright (C) 1994, 1995, Daniel Quinlan .\" Copyright (C) 2002-2008, 2017, Michael Kerrisk .\" Copyright (C) , Alan Cox .\" Copyright (C) 2023, Alejandro Colomar .\" .\" SPDX-License-Identifier: GPL-3.0-or-later .\" .TH proc_pid_net 5 2023-08-15 "Linux man-pages 6.7" .SH NAME /proc/pid/net/, /proc/net/ \- network layer information .SH DESCRIPTION .TP .IR /proc/ pid /net/ " (since Linux 2.6.25)" See the description of .IR /proc/net . .TP .I /proc/net/ This directory contains various files and subdirectories containing information about the networking layer. The files contain ASCII structures and are, therefore, readable with .BR cat (1). However, the standard .BR netstat (8) suite provides much cleaner access to these files. .IP With the advent of network namespaces, various information relating to the network stack is virtualized (see .BR network_namespaces (7)). Thus, since Linux 2.6.25, .\" commit e9720acd728a46cb40daa52c99a979f7c4ff195c .I /proc/net is a symbolic link to the directory .IR /proc/self/net , which contains the same files and directories as listed below. However, these files and directories now expose information for the network namespace of which the process is a member. .TP .I /proc/net/arp This holds an ASCII readable dump of the kernel ARP table used for address resolutions. It will show both dynamically learned and preprogrammed ARP entries. The format is: .IP .in +4n .EX IP address HW type Flags HW address Mask Device 192.168.0.50 0x1 0x2 00:50:BF:25:68:F3 * eth0 192.168.0.250 0x1 0xc 00:00:00:00:00:00 * eth0 .EE .in .IP Here "IP address" is the IPv4 address of the machine and the "HW type" is the hardware type of the address from RFC\ 826. The flags are the internal flags of the ARP structure (as defined in .IR /usr/include/linux/if_arp.h ) and the "HW address" is the data link layer mapping for that IP address if it is known. .TP .I /proc/net/dev The dev pseudo-file contains network device status information. This gives the number of received and sent packets, the number of errors and collisions and other basic statistics. These are used by the .BR ifconfig (8) program to report device status. The format is: .IP .EX Inter\-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 2776770 11307 0 0 0 0 0 0 2776770 11307 0 0 0 0 0 0 eth0: 1215645 2751 0 0 0 0 0 0 1782404 4324 0 0 0 427 0 0 ppp0: 1622270 5552 1 0 0 0 0 0 354130 5669 0 0 0 0 0 0 tap0: 7714 81 0 0 0 0 0 0 7714 81 0 0 0 0 0 0 .EE .\" .TP .\" .I /proc/net/ipx .\" No information. .\" .TP .\" .I /proc/net/ipx_route .\" No information. .TP .I /proc/net/dev_mcast Defined in .IR /usr/src/linux/net/core/dev_mcast.c : .IP .in +4n .EX indx interface_name dmi_u dmi_g dmi_address 2 eth0 1 0 01005e000001 3 eth1 1 0 01005e000001 4 eth2 1 0 01005e000001 .EE .in .TP .I /proc/net/igmp Internet Group Management Protocol. Defined in .IR /usr/src/linux/net/core/igmp.c . .TP .I /proc/net/rarp This file uses the same format as the .I arp file and contains the current reverse mapping database used to provide .BR rarp (8) reverse address lookup services. If RARP is not configured into the kernel, this file will not be present. .TP .I /proc/net/raw Holds a dump of the RAW socket table. Much of the information is not of use apart from debugging. The "sl" value is the kernel hash slot for the socket, the "local_address" is the local address and protocol number pair. \&"St" is the internal status of the socket. The "tx_queue" and "rx_queue" are the outgoing and incoming data queue in terms of kernel memory usage. The "tr", "tm\->when", and "rexmits" fields are not used by RAW. The "uid" field holds the effective UID of the creator of the socket. .\" .TP .\" .I /proc/net/route .\" No information, but looks similar to .\" .BR route (8). .TP .I /proc/net/snmp This file holds the ASCII data needed for the IP, ICMP, TCP, and UDP management information bases for an SNMP agent. .TP .I /proc/net/tcp Holds a dump of the TCP socket table. Much of the information is not of use apart from debugging. The "sl" value is the kernel hash slot for the socket, the "local_address" is the local address and port number pair. The "rem_address" is the remote address and port number pair (if connected). \&"St" is the internal status of the socket. The "tx_queue" and "rx_queue" are the outgoing and incoming data queue in terms of kernel memory usage. The "tr", "tm\->when", and "rexmits" fields hold internal information of the kernel socket state and are useful only for debugging. The "uid" field holds the effective UID of the creator of the socket. .TP .I /proc/net/udp Holds a dump of the UDP socket table. Much of the information is not of use apart from debugging. The "sl" value is the kernel hash slot for the socket, the "local_address" is the local address and port number pair. The "rem_address" is the remote address and port number pair (if connected). "St" is the internal status of the socket. The "tx_queue" and "rx_queue" are the outgoing and incoming data queue in terms of kernel memory usage. The "tr", "tm\->when", and "rexmits" fields are not used by UDP. The "uid" field holds the effective UID of the creator of the socket. The format is: .IP .EX sl local_address rem_address st tx_queue rx_queue tr rexmits tm\->when uid 1: 01642C89:0201 0C642C89:03FF 01 00000000:00000001 01:000071BA 00000000 0 1: 00000000:0801 00000000:0000 0A 00000000:00000000 00:00000000 6F000100 0 1: 00000000:0201 00000000:0000 0A 00000000:00000000 00:00000000 00000000 0 .EE .TP .I /proc/net/unix Lists the UNIX domain sockets present within the system and their status. The format is: .IP .EX Num RefCount Protocol Flags Type St Inode Path 0: 00000002 00000000 00000000 0001 03 42 1: 00000001 00000000 00010000 0001 01 1948 /dev/printer .EE .IP The fields are as follows: .RS .TP 10 .IR Num : the kernel table slot number. .TP .IR RefCount : the number of users of the socket. .TP .IR Protocol : currently always 0. .TP .IR Flags : the internal kernel flags holding the status of the socket. .TP .IR Type : the socket type. For .B SOCK_STREAM sockets, this is 0001; for .B SOCK_DGRAM sockets, it is 0002; and for .B SOCK_SEQPACKET sockets, it is 0005. .TP .IR St : the internal state of the socket. .TP .IR Inode : the inode number of the socket. .TP .IR Path : the bound pathname (if any) of the socket. Sockets in the abstract namespace are included in the list, and are shown with a .I Path that commences with the character '@'. .RE .TP .I /proc/net/netfilter/nfnetlink_queue This file contains information about netfilter user-space queueing, if used. Each line represents a queue. Queues that have not been subscribed to by user space are not shown. .IP .in +4n .EX 1 4207 0 2 65535 0 0 0 1 (1) (2) (3)(4) (5) (6) (7) (8) .EE .in .IP The fields in each line are: .RS 7 .TP 5 (1) The ID of the queue. This matches what is specified in the .B \-\-queue\-num or .B \-\-queue\-balance options to the .BR iptables (8) NFQUEUE target. See .BR iptables\-extensions (8) for more information. .TP (2) The netlink port ID subscribed to the queue. .TP (3) The number of packets currently queued and waiting to be processed by the application. .TP (4) The copy mode of the queue. It is either 1 (metadata only) or 2 (also copy payload data to user space). .TP (5) Copy range; that is, how many bytes of packet payload should be copied to user space at most. .TP (6) queue dropped. Number of packets that had to be dropped by the kernel because too many packets are already waiting for user space to send back the mandatory accept/drop verdicts. .TP (7) queue user dropped. Number of packets that were dropped within the netlink subsystem. Such drops usually happen when the corresponding socket buffer is full; that is, user space is not able to read messages fast enough. .TP (8) sequence number. Every queued packet is associated with a (32-bit) monotonically increasing sequence number. This shows the ID of the most recent packet queued. .RE .IP The last number exists only for compatibility reasons and is always 1. .SH SEE ALSO .BR proc (5)