other versions
SIM_TORCH(9) | HAL Component | SIM_TORCH(9) |
NAME¶
sim_torch - A simulated plasma torch
SYNOPSIS¶
loadrt sim_torch
DESCRIPTION¶
A simulated plasma torch for ark-ok testing.
VERSION:
0.1
FUNCTIONS¶
PINS¶
- sim-torch.cut-noise-in float in (default: 0.75)
- the amount of noise during cutting (volts)
- sim-torch.cycles-in s32 in (default: 200)
- the number of cycles that the arc voltage overshoots the cut voltage (cycles)
- sim-torch.on-delay-in s32 in (default: 10)
- the time from turn on until overshoot begins (cycles)
- sim-torch.offset-in float in
- the cut voltage offset(volts)
- sim-torch.overshoot-in s32 in (default: 50)
- the percentage of the cut voltage that the arc voltage overshoots (percent)
- sim-torch.ramp-noise-in float in (default: 5)
- the amount of noise during overshoot (volts)
- sim-torch.ramp-up-in s32 in (default: 80)
- percent of 'cycles_in' that the arc voltage ramps up (percent)
- sim-torch.start bit in
- start the arc
- sim-torch.voltage-in float in (default: 100)
- the cut voltage (volts)
- sim-torch.voltage-out float out
- output voltage (volts)
AUTHOR¶
Phillip A Carter
LICENSE¶
GPLv2 or greater
2022-02-25 | LinuxCNC Documentation |