Scroll to navigation

SCHEDRMT(1) The Enhanced Machine Controller SCHEDRMT(1)

NAME

schedrmt - telnet based scheduler for LinuxCNC

SYNOPSIS

schedrmt

DESCRIPTION


schedrmt {-- --port <port number> --name <server name> --connectpw <password>
--enablepw <password> --sessions <max sessions> --path <path>
-ini <INI file>}


With -- --port Waits for socket connections (Telnet) on specified socket, without port
uses default port 5007.
With -- --name <server name> Sets the server name to specified name for Hello.
With -- --connectpw <password> Sets the connection password to 'password'. Default EMC
With -- --enablepw <password> Sets the enable password to 'password'. Default EMCTOO
With -- --sessions <max sessions> Sets the maximum number of simultaneous connextions
to max sessions. Default is no limit (-1).
With -- --path Sets the base path to program (G-Code) files, default is "../../nc_files/".
Make sure to include the final slash (/).
With -- -ini <INI file>, uses specified INI file instead of default emc.ini.


There are six commands supported, Where the commands set and get contain
LinuxCNC-specific sub-commands based on the commands supported by emcsh, but where the "emc_"
prefix is omitted. Commands and most parameters are not case-sensitive.
The exceptions are passwords, file paths and text strings.


The supported commands are as follows:


==> HELLO <==


Hello <password> <client> <version>
If a valid password was entered the server will respond with


HELLO ACK <Server Name> <Server Version>


Where server name and server version are looked up from the implementation.
if an invalid password or any other syntax error occurs then the server
responds with:


HELLO NAK


==> Get <==


The get command includes one of the emc sub-commands, described below and
zero or more additional parameters.


==> Set <==


The set command inclides one of the emc sub-commands, described below and
one or more additional parameters.


==> Quit <==


The quit command disconnects the associated socket connection.


==> Shutdown <==


The shutdown command tells EMC to shutdown before quitting the connection. This
command may only be issued if the Hello has been successfully negotiated and the
connection has control of the CNC (see enable sub-command below). This command
has no parameters.


==> Help <==


The help command will return help information in text format over the telnet
connection. If no parameters are specified, it will itemize the available commands.
If a command is specified, it will provide usage information for the specified
command. Help will respond regardless of whether a "Hello" has been
successfully negotiated.


EMC sub-commands:


echo on | off
With get will return the current echo state, with set, sets the echo
state. When echo is on, all commands will be echoed upon receipt. This
state is local to each connection.


verbose on | off
With get will return the current verbose state, with set, sets the
verbose state. When in verbose mode is on, all set commands return
positive acknowledgement in the form SET <COMMAND> ACK. In addition,
text error messages will be issued when in verbose mode. This state
is local to each connection.


enable <pwd> | off
With get will return On or Off to indicate whether the current connection
is enabled to perform control functions. With set and a valid password,
the current connection is enabled for control functions. "OFF" may not
be used as a password and disables control functions for this connection.


config [TBD]


comm_mode ascii | binary
With get, will return the current communications mode. With set, will
set the communications mode to the specified mode. The binary protocol
is TBD.


comm_prot <version no>
With get, returns the current protocol version used by the server,
with set, sets the server to use the specified protocol version,
provided it is lower than or equal to the highest version number
supported by the server implementation.


INIFILE
Returns the path and file name of the current configuration INI file.


plat
Returns the platform for which this was compiled, e.g., linux_2_0_36


ini <var> <section>
Returns the string value of <var> in section <section>, in EMC_INIFILE


debug {<new value>}
With get, returns the integer value of EMC_DEBUG, in the EMC. Note that
it may not be true that the local EMC_DEBUG variable here (in emcsh and
the GUIs that use it) is the same as the EMC_DEBUG value in the EMC. This
can happen if the EMC is started from one INI file, and the GUI is started
with another that has a different value for DEBUG.
With set, sends a command to the EMC to set the new debug level,
and sets the EMC_DEBUG global here to the same value. This will make
the two values the same, since they really ought to be the same.


QMode <mode>
stop | run | pause | resume (Set only) | error (Get only)
With no arg, returns the program queue status as "stop", "run", "pause" or "error". Otherwise,
sends a command to set the current mode to "stop", "run" or "pause".


QStatus <Queue Size> <First Tag Id> <Last Tag Id> <Queue CRC>
Get only, returns then number of programs in queue (Queue Size), the Tag id of the first
program in the queue, the Tag id of the last program in the queue, and the CRC of all
of the Tag Ids in the queue. The actual calculation of the CRC is not important, the
purpose is to be able to compare the current CRC with the previous CRC. If they
differ, then there has been a change to the size or order of the programs in queue.


AutoTagId <Start Id>
With get, returns the next autoincremented unique tag id to associate with a queue record.
With set, resets auto tag generation to begin at the specified value.


PgmAdd <priority> <tag id> <x> <y> <z> <zone> <file name> <feed override> <spindle override> <tool>
With set, adds a program to the queue with priority of the program, a unique tag identifying the
program, the x, y and z offsets or zone for the origin of the program, the path + file name, the
feed and spindle overrides to apply, and the default tool to use. If tag id is zero, the tag id
will be generated automatically. If zone is zero, then the x, y, and z offsets will be used,
otherwise zones 1 to 9 correspond to G54 to G59.3 respectively.


PgmById <tag id>
[priority] [tag id] [x] [y] [z] [zone] [file name] [feed override] [spindle override] [tool]
With get, returns the queue entry matching the specified tag id, including the priority,
tag id, x, y, and z coordinates, the zone, file name, feed and spindle overrides and the default tool.


PgmByIndex <index>
[priority] [tag id] [x] [y] [z] [zone] [file name] [feed override] [spindle override] [tool]
With get, returns the queue entry matching the specified index into the queue, including the priority,
tag id, x, y, and z coordinates, the zone, file name, feed and spindle overrides and the default
tool.


PgmAll
With get, performs effectively a PgmByIndex for every entry in the queue. Each result will be
returned in the form: "PGMBYINDEX ..." with cr lf at the end of each record.


PriorityById <tag id> <priority>
With get, returns the priority of the queue entry matching the specified tag. With set, changes the
priority of the queue entry to the specified priority.


PriorityByIndex <tag id> <priority>
With get, returns the priority of the queue entry matching the specified index into the queue. With
set, changes the priority of the queue entry to the specified priority.


DeleteById <tag id>
With set, deletes the queue entry matching the specified tag id.


DeleteByIndex <index>
With set, deletes the queue entry matching the specified index into the queue.


PollRate <rate>
With set, sets the rate at which the scheduler polls for information. The default is 1.0 or one
second. With get, returns the current poll rate.

SEE ALSO

LinuxCNC(1)

Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.

BUGS

None known at this time.

AUTHOR

This man page written by andypugh, as part of the LinuxCNC project.

REPORTING BUGS

Report bugs at https://github.com/LinuxCNC/linuxcnc/issues

COPYRIGHT

Copyright © 2020 andypugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

2020-08-26 LinuxCNC Documentation