Scroll to navigation

dsktrans(1) Emulators dsktrans(1)

NAME

dsktrans - Copy from one floppy or image file to another

SYNOPSIS

dsktrans [-itype TYPE] [-otype TYPE] [-iside SIDE] [-oside SIDE] [-icomp COMP] [-ocomp COMP] [-idstep] [-odstep] [-retry COUNT] [-format FMT] [-first CYLINDER] [-last CYLINDER] [-comment TEXT] [-comment @FILE] [-md3] [-logical] [-apricot] [-pcdos] [-noformat] INPUT-IMAGE OUTPUT-IMAGE

DESCRIPTION

Dsktrans copies floppy discs or disc images, optionally converting the image file type. This simulates the process of copying a floppy disc (read a track, write a track). It requires that the disc or image file has a straightforward geometry where all the tracks are have the same layout of sectors. Interleave is not preserved. See also dskconv(1) for a conversion that can transform one disc image file format to another and does not require a regular geometry; and dskdump(1) for a slower but more accurate copy which may preserve more of these details.

OPTIONS

Determines which driver is to be used to read from the source disc. Some examples are:
Select according to the disc image file. This is the default.
Use the DSK (CPCEmu format) image driver.
Use the extended version of the DSK format.
Use the floppy driver.
(Under Windows 2000 and later) Use Simon Owen's FDRAWCMD floppy driver.
Use the hard disk (MYZ80 format) image driver. (This format cannot be autodetected.)
Use the CFI (DOS fdcopy format) image driver. (This format cannot be autodetected.)
Use the ApriDisk image driver (from the utility of the same name). (This format cannot be autodetected.)
Use the raw driver.
Similar to the raw driver, but the resulting disc image contains tracks laid out in logical filesystem order. Mainly used for imaging discs in formats (such as ADFS) where the mapping of tracks to cylinders/heads does not match the way it's done on the PC.
Sydex's CopyQM format
Sydex's Teledisk format

Determines which driver is to be used to write to the destination disc. The drivers are as for -itype.

Select the compression method used on the source disc image file (has no effect when reading a floppy disc).
Detect from the first few bytes of the file. This is the default.
Huffman coded (SQ / USQ).
Gzipped (gzip / gunzip).
Burrows-Wheeler compressed (bzip2 / bunzip2).

Select the compression to be used on output. Compression methods are as for -icomp, except that bz2 cannot be used.

Determines which side (0 or 1) of the source disc is to be read from.

Determines which side (0 or 1) of the destination disc is to be written to.

Double-step the source drive (used to read 360k discs in 1.2Mb drives). Only supported by the Linux floppy driver.

Double-step the destination drive (used to write 360k discs in 1.2Mb drives). Only supported by the Linux floppy driver.

Set the number of times to attempt a read/write/format in case of error.

Do not autodetect the disc format; use the named format.

Start copying at the specified cylinder. Cylinders prior to this will not be formatted or written.

Copy up to and including the specified cylinder.

Set the comment field in the disc image to the specified text (if supported by the image file format).

Set the comment field in the disc image to the contents of the specified disc file (if supported by the image file format). If the filename is "-" (i.e. -comment @- ) then you will be asked to type the comment, terminated with a "." on a line by itself.

Double-step the destination drive (used to write 360k discs in 1.2Mb drives). Only supported by the Linux floppy driver.

Defeat MicroDesign 3 copy protection. Note that this does not make dsktrans a circumvention device, since the authors of MicroDesign have placed it in the public domain and given permission for the copy-protection to be reverse engineered; I posted their original press release to USENET as <1008359853.26849.0.nnrp-13.c2de7091@news.demon.co.uk>.

Convert the first sector from an Apricot superblock to a PC-DOS superblock. This allows Apricot-format discs to be imaged as files (with the output image type as raw) and then loopback-mounted under Linux.

Reverse -pcdos, and convert the first sector from a PC-DOS superblock to an Apricot superblock. Note that this is the opposite of what this option did in LibDsk 1.1.9 and earlier.

Rearrange the tracks in the logical order. This option has been superseded; instead you should use -otype logical to output to a logically-sectored raw image.

Don't format the target disc/image - assume it's in the correct format already.

SEE ALSO

dskconv(1), dskdump(1)

AUTHOR

John Elliott <seasip.webmaster@gmail.com>.

Darren Salt wrote the man pages.

17 September 2018 Version 1.5.9