.TH i8kmon 1 "04 Mar 2017" "Vitor Augusto" Utilities
.SH "NAME"
i8kmon \- temperature monitor
.SH "SYNOPSIS"
i8kmon [\fI<options>\fP]
.SH "DESCRIPTION"
The i8kmon is a daemon that monitors the cpu temperature, and control the
fan speed on some Dell laptops. It does that by means of regularly reading the
system temperature, and choosing appropriate speed of the fans.
.LP
The change in the speed depends on a table of threshold. Inside i8kmon the
default table of thresholds is as below
.LP
    set config(0) {{0 0}  -1  60  -1  65}
    set config(1) {{1 0}  50  70  55  75}
    set config(2) {{1 1}  60  80  65  85}
    set config(3) {{2 2}  70 128  75 128}
.LP
This table can be customized at '/etc/i8kmon.conf', which will be read everytime
i8kmon service starts.
.LP
On Debian and derivated OSes, i8kmon starts in the background by default as a service.
.SH "OPTIONS"
.LP
i8kmon accepts the following command\-line options when initiated by the user,
not as a service:
.TP
\fB\-nc\fR, \fB\-\-nouserconfig\fR
Doesn't read ~/.i8kmon configfile, only /etc/i8kmon.conf.
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Report hardware status and program actions on stdout.
.TP
\fB\-t\fR, \fB\-\-timeout\fR <\fIseconds\fP>
Specifies the interval at which the daemon checks the
hardware status. Useful values are in the range of 1\-5
seconds. Default is 2 seconds.
.SH "CONFIGURATION"
.LP
As said before, i8kmon has builtin default values of temperature thresholds. If
users need, they can
specify their own settings in configuration files /etc/i8kmon.conf and
~/.i8kmon. It is also possible to specify values to others variables
that change i8kmon behavior.
.LP
The variables and values are as follows.
.TP
\fBset config(i8kfan)\fR  /usr/bin/i8kfan
i8kfan executable path
.TP
\fBset config(acpi)\fR    "acpi"
Filename of the apci executable. i8kmon uses acpi to query whether notebook is
on-line or on battery.
.TP
\fBset config(use_conf)\fR    1
Set whether user configuration file must be read or not when user starting
i8kmon. Default is 1.
.TP
\fBset config(verbose)\fR 0
Print verbose logs
.TP
\fBset config(timeout)\fR 2
Timeout. Default is 2.
.TP
\fBset config(t_high)\fR  80
Maximum high temperature. Default is 80.
.LP
The following variables set fans speeds. If these variables are set at config
file, i8kmon will not probe for them. The probe moment turns on fans at max
speed.
.TP
\fBset status(leftspeed)\fR   "0 1000 2000 3000"
Speed values (rpm) of left fan at velocities 0, 1, 2, 3
.TP
\fBset status(rightspeed)\fR   "0 1000 2000 3000"
Speed values (rpm) of right fan at velocities 0, 1, 2, 3
.LP
The daemon defines 4 states (0, 1, 2, 3) with different combinations of fan
speeds ({0 0}, {1 0}, {1 1},
{2 2}) and for each state is defined the temperature thresholds which cause
the fans to switch to a higher or lower state. Each state can have
different thresholds for operation on ac power or on battery.
For example the following configuration:
.IP
set config(0) {{0 0}  \-1  60  \-1  65}
.br
set config(1) {{1 0}  50  70  55  75}
.br
set config(2) {{1 1}  60  80  65  85}
.br
set config(3) {{2 2}  70 128  75 128}
.LP
defines state 0 with both fans off, high threshold of 60 degrees (65 on
battery) and low threshold \-1 degrees, which is actually never reached since 0 is the
lowest temperature. When the high temperature threshold is reached the program switches to state
1 (left low, right off) which has a high threshold of 70 degrees and a low
threshold of 50 degrees. If on ac power the temperature drops below 50 the program will
switch back to state 0, if it rises above 70 it will enter state 2, and so on.
For better operation the temperature ranges should be overlapping with an
hysteresis of at least 10 degrees, i.e. 1={50 70},2={60 80} is better than
1={50 70},2={70 80}. It must be remembered that the low threshold of state 0
must be \-1 degrees and the high threshold of state 3 must be 128 degrees.
.LP
If the laptop has only one fan, it is better to specify a '-' instead of the fan
speed of the missing fan. For example:
.IP
set config(2) {{1 -}  60  80  65  85}
.SH "FILES"
.LP
\fI/proc/i8k\fP
.br
\fI/etc/i8kmon.conf\fP
.br
\fI/$HOME/.i8kmon\fP
.SH "AUTHORS"
.LP
Vitor Augusto <vitorafsr@gmail.com>
.br
Massimo Dal Zotto <dz@debian.org>
.SH "COPYRIGHT"
.LP
i8kmon and all the i8kutils programs, scripts and other files are
distributed under the GNU General Public License (GPL).
On Debian GNU/Linux systems, the complete text of the GNU General
Public License can be found in `/usr/share/common-licenses/GPL'.
.SH "SEE ALSO"
.LP
i8kctl(1)