.TH r3.out.vtk 1grass "" "GRASS 8.3.2" "GRASS GIS User's Manual"
.SH NAME
\fI\fBr3.out.vtk\fR\fR  \- Converts 3D raster maps into the VTK\-ASCII format.
.SH KEYWORDS
raster3d, export, output, voxel, VTK
.SH SYNOPSIS
\fBr3.out.vtk\fR
.br
\fBr3.out.vtk \-\-help\fR
.br
\fBr3.out.vtk\fR [\-\fBpsmocl\fR]  [\fBinput\fR=\fIname\fR[,\fIname\fR,...]]   [\fBoutput\fR=\fIname\fR]   [\fBnull\fR=\fIfloat\fR]   [\fBtop\fR=\fIstring\fR]   [\fBbottom\fR=\fIstring\fR]   [\fBrgbmaps\fR=\fIname\fR[,\fIname\fR,...]]   [\fBvectormaps\fR=\fIname\fR[,\fIname\fR,...]]   [\fBzscale\fR=\fIfloat\fR]   [\fBprecision\fR=\fIinteger\fR]   [\-\-\fBoverwrite\fR]  [\-\-\fBhelp\fR]  [\-\-\fBverbose\fR]  [\-\-\fBquiet\fR]  [\-\-\fBui\fR]
.SS Flags:
.IP "\fB\-p\fR" 4m
.br
Create VTK pointdata instead of VTK celldata (celldata is default)
.IP "\fB\-s\fR" 4m
.br
Create 3D elevation output with a top and a bottom surface, both raster maps are required.
.IP "\fB\-m\fR" 4m
.br
Use 3D raster mask (if exists) with input maps
.IP "\fB\-o\fR" 4m
.br
Scale factor affects the origin
.IP "\fB\-c\fR" 4m
.br
Correct the coordinates to match the VTK\-OpenGL precision
.IP "\fB\-l\fR" 4m
.br
Do not convert the top\-bottom resolution in case of lat long projection to meters
.IP "\fB\-\-overwrite\fR" 4m
.br
Allow output files to overwrite existing files
.IP "\fB\-\-help\fR" 4m
.br
Print usage summary
.IP "\fB\-\-verbose\fR" 4m
.br
Verbose module output
.IP "\fB\-\-quiet\fR" 4m
.br
Quiet module output
.IP "\fB\-\-ui\fR" 4m
.br
Force launching GUI dialog
.SS Parameters:
.IP "\fBinput\fR=\fIname[,\fIname\fR,...]\fR" 4m
.br
3D raster map(s) to be converted to VTK\-ASCII data format
.IP "\fBoutput\fR=\fIname\fR" 4m
.br
Name for VTK\-ASCII output file
.IP "\fBnull\fR=\fIfloat\fR" 4m
.br
Float value to represent no data cell/points
.br
Default: \fI\-99999.99\fR
.IP "\fBtop\fR=\fIstring\fR" 4m
.br
Top surface 2D raster map
.IP "\fBbottom\fR=\fIstring\fR" 4m
.br
Bottom surface 2D raster map
.IP "\fBrgbmaps\fR=\fIname[,\fIname\fR,...]\fR" 4m
.br
Three (R,G,B) 3D raster maps to create RGB values [redmap,greenmap,bluemap]
.IP "\fBvectormaps\fR=\fIname[,\fIname\fR,...]\fR" 4m
.br
Three (x,y,z) 3D raster maps to create vector values [xmap,ymap,zmap]
.IP "\fBzscale\fR=\fIfloat\fR" 4m
.br
Scale factor for elevation
.br
Default: \fI1.0\fR
.IP "\fBprecision\fR=\fIinteger\fR" 4m
.br
Number of significant digits (floating point only)
.br
Options: \fI0\-20\fR
.br
Default: \fI12\fR
.SH DESCRIPTION
The module \fIr3.out.vtk\fR outputs 3D raster maps into VTK\-ASCII format.
Maps are valid 3D raster maps in the current mapset search path. The
\fIoutput\fR parameter is the name of a VTK\-ASCII file which will be
written in the current working directory. If \fIoutput\fR is not
specified then standard output (stdout) is used. The module is sensitive
to region settings (set with \fIg.region\fR).
.SH NOTES
This module generates \fIstructured points\fR with \fIcelldata\fR
(default) or \fIpointdata\fR. If top and bottom surfaces are requested
an \fIunstructured grid\fR with \fIcelldata\fR or a \fIstructured grid\fR
with \fIpointdata\fR is generated.
This data is put in a simple VTK\-ASCII file. Neither XML nor
binary output are supported. It is possible to choose more then one 3D raster
map
to be written in the VTK\-ASCII file. Each \fIcelldata\fR is named as the
3D raster map it represents. The user can visualize this file with the
\fIVTK Toolkit\fR,
\fIParaView\fR and
\fIMayaVi\fR which are based on
VTK. In case of 3D raster map with partially no data, the threshold filter in
ParaView can be used to visualize the valid data. Just filter all data which is
greater/lesser than the chosen null value in the VTK\-ASCII file.
.PP
The top and bottom region values are expected in meters.
If a Latitude\-Longitude (LL) coordinates are used, the elevation value for each
voxel will be converted into degrees.
.PP
The \fIinput\fR, \fIrgbmaps\fR and \fIvectormaps\fR parameters are
optional, so only the geometry can be exported.
.PP
If the user defines \fItop\fR and \fIbottom\fR and the 2D and 3D region
values differ, the 2D resolution will be adjusted to the 3D resolution. The
elevation maps are expected in meters. If Lat/Long coordinates are used, the
elevation will automatically converted into degree.
If the surface and bottom maps are in a different unit than meters, use the
scale parameter to convert them into meters.
.PP
The RGB voxel data can be created from 2D raster maps (Landsat TM images)
with \fIr.to.rast3\fR. The values of the RGB maps
must be within 0 and 255. If not, the values are automatically set
to 0 and warnings will be printed to stderr.
.PP
The vector data is created from three 3D raster maps. Each map represents a vector component.
So x, y and z components are required in this order. This data can be visualized with Glyph3d or
StreamTracer filters within Paraview.
.PP
If the \fI\-c\fR flag is used and the data should be visualised together with
other data exported via \fI*.out.vtk\fR modules, be sure the \fI\-c\fR flag
was also set in these modules. But this will only work with data from the SAME
location (the reference point for the coordinates transformation is based on the
center point of the default region).
.SS Difference between point\- and celldata
\fIr3.out.vtk\fR can export 3D raster maps with different representations.
.RS 4n
.IP \(bu 4n
\fIpointdata\fR \-\- the cells/values are represented by the center of the
cell. Instead of cells, points are created. Each point can hold different
values, but the user can only visualize one value at a time.
.IP \(bu 4n
\fIcelldata\fR The cells are created with the same height, width and depth
as in GRASS. Each cell can hold different values, but the user can only
visualize one value at a time.
.RE
.SH EXAMPLES
.SS Simple Spearfish example
.br
.nf
\fC
g.region \-d
g.region res=150 res3=150 t=80 b=0 tbres=10
r.mapcalc \(dqbottom = 1800. \- elevation.10m\(dq
# synthetic data, could be geological structures:
r3.mapcalc \(dqmap3d = row()+col()+depth()\(dq
#export of volume to VTK:
r3.out.vtk \-s input=map3d top=elevation.10m bottom=bottom output=/tmp/out.vtk
# visualize in paraview or other VTK viewer:
paraview \-\-data=/tmp/out.vtk
\fR
.fi
.SS Spearfish example with RGB data
.br
.nf
\fC
#set the region
g.region \-d
g.region n=4926970 s=4914857 w=591583 e=607793 res=50 res3=50 t=80 b=0 tbres=10
#create a bottom surface
r.mapcalc \(dqbottom = 1800. \- elevation.10m\(dq
# synthetic data, could be geological structures:
r3.mapcalc \(dqmap3d = row()+col()+depth()\(dq
#get some satellite images with r.in.onearth
r.in.onearth \-l output=Sat tmband=Red
r.in.onearth \-l output=Sat tmband=IR1
r.in.onearth \-l output=Sat tmband=IR2
#Convert the 2D maps to 3D raster maps with r.to.rast3
r.to.rast3 input=SatLandsatTM_Red output=SatLandsatTM_Red
r.to.rast3 input=SatLandsatTM_IR1 output=SatLandsatTM_IR1
r.to.rast3 input=SatLandsatTM_IR2 output=SatLandsatTM_IR2
#export of volume to VTK:
r3.out.vtk \-s rgbmaps=SatLandsatTM_IR1,SatLandsatTM_IR2,SatLandsatTM_Red
input=map3d top=elevation.10m bottom=bottom output=/tmp/out.vtk
# visualize in paraview or other VTK viewer:
paraview \-\-data=/tmp/out.vtk
\fR
.fi
.SS Spearfish example with vector data
.br
.nf
\fC
# set the region
g.region \-d
g.region n=4926970 s=4914857 w=591583 e=607793 res=50 res3=50 t=80 b=0 tbres=10
# create a bottom surface
r.mapcalc \(dqbottom = 1800. \- elevation.10m\(dq
# synthetic data, could be geological structures:
r3.mapcalc \(dqmap3d = row()+col()+depth()\(dq
# synthetic vector data, could be groundwater stream vectors
r3.mapcalc \(dqx_part = sin(row())\(dq
r3.mapcalc \(dqy_part = cos(col())\(dq
r3.mapcalc \(dqz_part = sin(depth())\(dq
# export the stuff data to VTK:
r3.out.vtk \-s vectormaps=x_part,y_part,z_part input=map3d top=elevation.10m
bottom=bottom output=/tmp/out.vtk
# visualize in paraview or other VTK viewer:
paraview \-\-data=/tmp/out.vtk
# Now use the Glyph and Stream\-Trace Filter to get nice vectors and streamlines
\fR
.fi
.SS Slovakia3d example
.br
.nf
\fC
#reduce resolution:
g.region \-dp3 res=1000 res3=1000
r.mapcalc \(dqbottom = 100\(dq
#export of volume to VTK:
r3.out.vtk \-s in=precip3d.500z50 top=dem500 bottom=bottom \(rs
   output=/path/to/slovakia3d.vtk
# visualize in paraview or other VTK viewer:
paraview \-\-data=/path/to/slovakia3d.vtk
# set Display style to \(cqsurface#
# set Actor Control z to 10
\fR
.fi
.SH SEE ALSO
\fI
r.out.vtk,
r3.out.ascii,
g.region
\fR
.SH AUTHOR
Sören Gebbert
.SH SOURCE CODE
.PP
Available at:
r3.out.vtk source code
(history)
.PP
Accessed: Friday Mar 08 07:34:58 2024
.PP
Main index |
3D raster index |
Topics index |
Keywords index |
Graphical index |
Full index
.PP
© 2003\-2024
GRASS Development Team,
GRASS GIS 8.3.2 Reference Manual