pssac - Plot seismograms in SAC format on maps
pssac [ saclist|SACfiles ]
-Rregion [ -B[p|s]parameters ] [ -C[t0/t1] ] [ -Ddx[/dy] ] [ -Ea|b|k|d|n[n]|u[n] ] [ -F[i][q][r] ] [ -G[p|n][+gfill][+zzero][+tt0/t1] ] [ -K ] [ -Msize[u][/alpha] ] [ -O ] [ -P ] [ -Q ] [ -S[i]scale[unit] ] [ -T[+tn][+rreduce_vel][+sshift] ] [ -U[stamp] ] [ -V[level] ] [ -Wpen ] [ -Xx_offset ] [ -Yy_offset ] [ -hheaders ] [ -ttransp ]
Note: No space is allowed between the option flag and the associated arguments.
pssac reads SACfiles in SAC format or reads filenames and controlling parameters from saclist [or standard input] and generates PostScript that will plot seismograms on a map. The PostScript code is written to standard output.
- SAC files to plot on a map. Only evenly spaced SAC data is supported.
- One ASCII data table file holding a number of data columns. If saclist is not given then we read from standard input. Parameters are expected to be in the following columns:
filename is the name of SAC file to plot. X and Y are the position of seismograms to plot on a map. On linear plots, the default X is the begin time of SAC file, which will be adjusted if -T option is used, the default Y is determined by -E option. On geographic plots, the default X and Y are station longitude and latitude specified in SAC header. The X and Y given here will override the position determined by command line options. pen, if given, will override the pen from -W option for current SAC file only.
- -Jparameters (more ...)
- Select map projection.
- west, east, south, and north specify the region of interest, and you may specify them in decimal degrees or in [±]dd:mm[:ss.xxx][W|E|S|N] format Append +r if lower left and upper right map coordinates are given instead of w/e/s/n. The two shorthands -Rg and -Rd stand for global domain (0/360 and -180/+180 in longitude respectively, with -90/+90 in latitude). Alternatively for grid creation, give Rcodelon/lat/nx/ny, where code is a 2-character combination of L, C, R (for left, center, or right) and T, M, B for top, middle, or bottom. e.g., BL for lower left. This indicates which point on a rectangular region the lon/lat coordinate refers to, and the grid dimensions nx and ny with grid spacings via -I is used to create the corresponding region. Alternatively, specify the name of an existing grid file and the -R settings (and grid spacing, if applicable) are copied from the grid. Appending +uunit expects projected (Cartesian) coordinates compatible with chosen -J and we inversely project to determine actual rectangular geographic region. For perspective view (-p), optionally append /zmin/zmax. In case of perspective view (-p), a z-range (zmin, zmax) can be appended to indicate the third dimension. This needs to be done only when using the -Jz option, not when using only the -p option. In the latter case a perspective view of the plane is plotted, with no third dimension.
- -B[p|s]parameters (more ...)
- Set map boundary frame and axes attributes.
- Read and plot seismograms in timewindow between t0 and t1 only. t0 and t1 are relative to a reference time specified by -T. If -T option is not specified, use the reference time (kzdate and kztime) defined in SAC header instead. If only -C is used, t0/t1 is determined as xmin/xmax from -R option.
- Offset seismogram positions by the given mount dx/dy [Default is no offset]. If dy is not given it is set equal to dx.
- Choose profile type (the type of Y axis).
b: back-azimuth profile.
k: epicentral distance (in km) profile.
d: epicentral distance (in degree) profile.
n: trace number profile. The Y position of first trace is numbered as n [Default n is 0].
u: user defined profile. The Y positions are determined by SAC header variable usern, default using user0.
- Data preprocess before plotting.
r: remove mean value
i|q|r can repeat multiple times. For example, -Frii will convert acceleration to displacement. The order of i|q|r controls the order of the data processing.
- Paint positive or negative portion of traces. If only -G is used, default to fill the positive portion black.
+gfill: color to fill
+tt0/t1: paint traces between t0 and t1 only. The reference time of t0 and t1 is determined by -T option.
+zzero: define zero line. From zero to top is positive portion, from zero to bottom is negative portion.
- -K (more ...)
- Do not finalize the PostScript plot.
- Vertical scaling.
alpha = 0, multiply all traces by size. No unit is allowed.
alpha > 0, multiply all traces by size*r^alpha, r is the distance range in km.
- -O (more ...)
- Append to existing PostScript plot.
- -P (more ...)
- Select "Portrait" plot orientation.
- Plot traces vertically.
- Sets time scale in seconds per <unit> while plotting on geographic plots. Append c, i, or p to indicate cm, inch or points as the unit. Use PROJ_LENGTH_UNIT if unit is omitted. Use -Siscaleunit to give the reciprocal scale, i.e. cm per second or inch per second.
- Time alignment and shift.
+rreduce_vel: reduce velocity in km/s.
+sshift: shift all traces by shift seconds.
- -U[[just]/dx/dy/][c|label] (more ...)
- Draw GMT time stamp logo on plot.
- -V[level] (more ...)
- Select verbosity level [c].
- Set pen attributes for all traces unless overruled by pen specified in saclist. [Defaults: width = default, color = black, style = solid].
- -Y[a|c|f|r][y-shift[u]] (more ...)
- Shift plot origin.
- -h[i|o][n][+c][+d][+rremark][+rtitle] (more ...)
- Skip or produce header record(s).
- -t[transp] (more ...)
- Set PDF transparency level in percent.
- -^ or just -
- Print a short message about the syntax of the command, then exits (NOTE: on Windows just use -).
- -+ or just +
- Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exits.
- -? or no arguments
- Print a complete usage (help) message, including the explanation of all options, then exits.
To plot a single seismogram seis.SAC (generated by SAC command funcgen seismogram) and paint positive portion black and negative portion red:
gmt pssac seis.SAC -JX10c/5c -R9/20/-2/2 -Baf -Fr -Gp+gblack -Gn+gred > single.ps
To plot several seismograms (generated by SAC command datagen sub tele *.z) on a distance profile:
gmt pssac *.z -R200/1600/12/45 -JX15c/5c -Bx200+l'T(s)' -By5+lDegree -BWSen \
-Ed -M1.5c -W0.5p,red > distance_profile.ps
To plot seismograms (generated by SAC command datagen sub tele *.z) on a geographic map:
gmt pssac *.z -JM15c -R-120/-40/35/65 -Baf -M1i -S300c -K > map.ps saclst stlo stla f *.z | gmt psxy -J -R -St0.4c -Gblack -i1,2 -O >> map.ps
psmeca, pspolar, pscoupe, psvelo, gmt, psbasemap, psxy
Refer to SAC User Manual for more details on SAC format and SAC header variables.
Dongdong Tian, School of Earth and Space Sciences, University of Science and Technology of China, Hefei, Anhui, China
2019, P. Wessel, W. H. F. Smith, R. Scharroo, J. Luis, and F. Wobbe
|May 21, 2019||5.4.5|