PROL(5)

RDS FILE FORMATS

PROL(5)

NAME¶

prol - define the rules for symbolic to real layout translation

ORIGIN¶

This software belongs to the ALLIANCE CAD SYSTEM developed by the ASIM team at LIP6 laboratory of Université Pierre et Marie CURIE, in Paris, France.

Web : http://asim.lip6.fr/recherche/alliance/
E-mail : alliance-users@asim.lip6.fr

DESCRIPTION¶

This file describes the rules used by the mbk(1) to rds translator. In the following file, symbolic layout objects are refered as mbk(1) objects, mbk(1) being the internal data structure that supports symbolic representation. On the other hand, rds is a data structure describing mainly rectangles, and is therefore used for real layout representation.

Some syntaxic remarques on the way to write the file follow. The case of identifiers is not significant, so NDIF is equivalent to NdiF. Comments are allowed anywhere in the file, using the sharp (#) as start of comment, and newline as end of comment. A line begining with a sharp will be ignored, and a line containing a sharp will be read up to the character preeceding it. A newline can be escaped using the backslash ( followed by the newline. If some character, spaces or tabs for example, follow the backslash, chances are that a syntax error will be issued.

First, some important process parameters are needed, the physical grid step, that is the least common multiple of all the technologies values in terms of layout distances, and the lambda, computed from a careful observation of the process design rules.
Then, a set of tables is needed, to describe how to translate a symbolic object, belonging to the mbk(1) world, and a set of layout rectangles, in rds.
Each table has a special meaning, and its parametrization exend beeing not full, some borders are to be evocated. Several type of table exists indeed. Some are needed for object translation, others for post treatment parametrization, others to define cif or gds identifiers regarding rds ones.
Many things seem to be parametrizable, but in fact, mostly, if not only, numbers, names in cif and gds translation tables, and boolean value in post treatement may be changed without problems.

For any table, if some layer is not applicable, it can simply be omitted. The default action is `do nothing', or use a value of 0.0 for all entries.

LAYERS AND PATTERNS¶

Since the goal of this file is to allow translation from mbk(1) to rds, the meaning of the layers in both representation shall be known.
Mbk layers

NWELL: minimum width 4 ; N-well.
PWELL: minimum width 4 ; P-well.
NTIE: minimum width 2 ; N diffusion for polarisation.
PTIE: minimum width 2 ; P diffusion for polarisation.
NDIF: minimum width 2 ; N diffusion for transistor.
PDIF: minimum width 2 ; P diffusion for transistor.
NTRANS: minimum width 1 (gate width) ; N transistor.
PTRANS: minimum width 1 (gate width) ; P transistor.
POLY: minimum width 1 ; polysilicon, not transistor gate.
ALU1: minimum width 1 ; first level of metal.
ALU2: minimum width 2 ; second level of metal.
ALU3: minimum width 3 ; third level of metal (unused).
TPOLY: minimum width 1 ; through route for POLY.
TALU1: minimum width 1 ; through route for ALU1.
TALU2: minimum width 2 ; through route for ALU2.
TALU3: minimum width 3 ; through route for ALU3 (unused).

Mbk patterns

CONT_POLY: cut pattern from ALU1 to POLY
CONT_VIA: cut pattern from ALU1 to ALU2
CONT_VIA2: cut pattern from ALU2 to ALU3
CONT_DIF_N: cut pattern from ALU1 to NDIF
CONT_DIF_P: cut pattern from ALU1 to PDIF
CONT_BODY_N: cut pattern from ALU1 to NTIE
CONT_BODY_P: cut pattern from ALU1 to PTIE
C_X_N: corner primitive for L or S shaped N transistor
C_X_P: corner primitive for L or S shaped P transistor

Rds layers

RDS_NWELL: N-well (or N-tub), bulk for P transistors.
RDS_PWELL: P-well (or P-tub), bulk for N transistors.
RDS_NDIF: use for symbolic extractor as equivalent of NDIF.
RDS_PDIF: use for symbolic extractor as equivalent of PDIF.
RDS_NTIE: use for symbolic extractor as equivalent of NTIE.
RDS_PTIE: use for symbolic extractor as equivalent of PTIE.
RDS_POLY: polysillicon run, for cell internal wirering.
RDS_GATE: transistor polysillicon, for gate.
RDS_TPOLY: polysillicon feed through. Indicate to a router that a track is free of polysillicon.
RDS_CONT: hole in the isolating layer between polysillicon or active area and first metal level.
RDS_ALU1: first metal level run.
RDS_TALU1: first metal level feed through. Indicates to a router that a track is free of first metal level.
RDS_VIA1: hole in the isolating layer between first metal level and second metal level.
RDS_ALU2: second metal level run.
RDS_TALU2: second metal level feed through. Indicate to a router that a track is free of second metal level.
RDS_VIA2: hole in the isolating layer between second metal level and third metal level.
RDS_ALU3: third metal level run.
RDS_TALU3: third metal level feed through. Indicate to a router that a track is free of third metal level.
RDS_ALU4: fourth metal. (Used only for GaAs designs.)
RDS_VIA3: hole in the isolating layer between third metal level and fourth metal level. (Used only for GaAs designs.)
RDS_ACTIV: active area dropped in N or P implant to build transistors.
RDS_NIMP: implant area, (sometime known as N select), for N transistors.
RDS_PIMP: implant area, (sometime known as P select), for P transistors.
RDS_CPAS: passivation, used in pads.
RDS_USER0: user defined purpose layer. (May be used for DRC logical operations.)
RDS_USER1: user defined purpose layer. (May be used for DRC logical operations.)
RDS_USER2: user defined purpose layer. (May be used for DRC logical operations.)
RDS_REF: virtual layer for the representation of symbolic references
RDS_ABOX: virtual layer needed to indicate the abutment box of a model.
RDS_DEFAULT: default layer, shall never appear anywhere.

FILE DESCRIPTION¶

The following lines describe the file, entry by entry, specifying what is expected.

Physical grid: DEFINE PHYSICAL_GRID .5
This statement defines the minimum grid spacing enforced by the foundry.
Lambda: DEFINE LAMBDA 1
This defines the value of the lambda in microns. This value, like any other one in the rest of the file must be a multiple of the PHYSICAL_GRID.
Segment translation table: TABLE MBK_TO_RDS_SEGMENT
This table contains all the informations needed to translate a symbolic segment of a given layer onto one, two or three real rectangles of specified layers. An example of this table is given below, with values needed for a technology where one lambda is equal to 1.05 μ and the design grid is set to 0.15 microns.

TABLE MBK_TO_RDS_SEGMENT


  NWELL    RDS_NWELL   VW  3.15  6.30  0.0  ALL


  NDIF     RDS_ACTIV   VW  0.60 -0.90  0.0  ALL \


           RDS_NIMP    VW  2.10  2.10  0.0  ALL


  PDIF     RDS_ACTIV   VW  0.60 -0.90  0.0  ALL \


           RDS_PIMP    VW  2.10  2.10  0.0  ALL


  NTIE     RDS_ACTIV   VW  0.60 -0.90  0.0  ALL \


           RDS_NIMP    VW  1.20  0.30  0.0  ALL


  PTIE     RDS_ACTIV   VW  0.60 -0.90  0.0  ALL \


           RDS_PIMP    VW  1.20  0.30  0.0  ALL


  NTRANS   RDS_GATE    VW  0.00  0.15  0.0  ALL \


           RDS_ACTIV   VW -1.50  4.35  0.0  ALL \


           RDS_NIMP    VW  0.00  7.35  0.0  ALL


  PTRANS   RDS_GATE    VW  0.00  0.15  0.0  ALL \


           RDS_ACTIV   VW -1.50  4.35  0.0  ALL \


           RDS_PIMP    VW  0.00  7.35  0.0  ALL


  POLY     RDS_POLY    VW  0.60  0.15  0.0  ALL


  ALU1     RDS_ALU1    VW  0.90  0.75  0.0  ALL


  ALU2     RDS_ALU2    VW  0.90 -0.30  0.0  ALL


  TPOLY    RDS_TPOLY   VW  0.60  0.15  0.0  ALL


  TALU1    RDS_TALU1   VW  0.90  0.75  0.0  ALL


  TALU2    RDS_TALU2   VW  0.90 -0.30  0.0  ALL
END

The first column is the mbk(1) layer name to be translated, then there one or more groups of 6 columns each. For each physical rectangle, there are 3 parameters :
- rds layer name
- One of VW, LCW, RCW that indicates the `type' of segment to be generated
- physical length extension: DLR
- physical width oversize: DWR
- offset from symbolic axis: OFFSET
- tools for which the generated rectangle is applicable: ALL, DRC (for the symbolic design rule checker, see druc(1)), EXT (for the symbolic extractor, see lynx(1)) These parameters are meant regarding the symbolic segment.

Connectors translation table: TABLE MBK_TO_RDS_CONNECTOR
This table contains all the informations needed to translate a symbolic connector of a given layer onto one single real rectangle.
An example of this table is given below, with values needed for a technology where one lambda is equal to 1.05 μ and the design grid is set to 0.15 micron.

TABLE MBK_TO_RDS_CONNECTOR


  POLY     RDS_POLY  0.6   0.15


  ALU1     RDS_ALU1  0.9   0.75


  ALU2     RDS_ALU2  0.9  -0.3
END

One symbolic connector is translated into one physical rectangle using 3 parameters :
- rds layer name
- physical width oversize: DWR
- physical extension on each side of the abutment box: DER

It is discouraged to use active or well layers as connectors while designing.

Vias translation table: TABLE MBK_TO_RDS_VIA
This table contains all the informations needed to translate a symbolic via of a given layer onto one to four real rectangles of user specified layers. An example of this table is given below, with values needed for a technology where one lambda is equal to 1.05 μ and the design grid is set to 0.15 micron.

TABLE MBK_TO_RDS_VIA


  CONT_BODY_N RDS_ALU1 3   RDS_CONT  1.5 RDS_ACTIV 3.3 RDS_NIMP 4.5


  CONT_BODY_P RDS_ALU1 3   RDS_CONT  1.5 RDS_ACTIV 3.3 RDS_PIMP 4.5


  CONT_DIF_N  RDS_ALU1 3   RDS_CONT  1.5 RDS_ACTIV 3.3 RDS_NIMP 6.3


  CONT_DIF_P  RDS_ALU1 3   RDS_CONT  1.5 RDS_ACTIV 3.3 RDS_PIMP 6.3


  CONT_POLY   RDS_ALU1 3   RDS_CONT  1.5 RDS_POLY  3


  CONT_VIA    RDS_ALU1 3   RDS_VIA1  1.5 RDS_ALU2  3


  CONT_VIA2


  C_X_N       RDS_GATE 1.2 RDS_ACTIV 5.4 RDS_NIMP  8.4


  C_X_P       RDS_GATE 1.2 RDS_ACTIV 5.4 RDS_PIMP  8.4
END

This table describes how to translate one symbolic via, to 2, 3 or 4 physical rectangles. The table is defined as follow : The first column is the mbk(1) via name to translate, then there are 4 groups of 2 columns each, which correspond to four potential targets rds rectangles of user specified layer. In one group the first column is the rds layer name, the second one is the rds layer width. The rectangle is centered on the contact coordinates, and expands in the four direction of half the given width value.

Denotching values table: TABLE S2R_OVERSIZE_DENOTCH
This table contains the oversize value needed to erase notches. All the rectangles of the same rds layer are oversized by this value and then merged alltogether and undersized by the same value. An example of this table is given below.

TABLE S2R_OVERSIZE_DENOTCH


  RDS_NWELL   3.00


  RDS_POLY    0.75


  RDS_GATE    0.75


  RDS_ALU1    0.75


  RDS_ALU2    0.75


  RDS_ACTIV   1.05


  RDS_NIMP    2.55


  RDS_PIMP    2.55
END

For some rds layers, like RDS_NWELL, RDS_NIMP and RDS_PIMP, two rectangles distant from less or equal the minimun spacing design rule must be merged in a single one. In this case, the oversize value is equal to the minimum spacing rule between two edges of the same layer divided by 2.
Some other rds layers, like RDS_ALU1, ..., must not be merged. In this case, the oversize value is equal to the minimum spacing rule between two edges of the same layer divided by 2, minus the physical grid.
Some layers never create notch, such as RDS_VIA1 or RDS_CONT, so the oversize value is null.

Ring width: TABLE S2R_BLOC_RING_WIDTH
s2r must merge segments to erase notches even if those segments are in two different hierarchical level blocs, for example, two blocs abuted side to side. So, it must be able to fetch segments inside blocs. It is not needed to flatten the entire bloc, only a ring is necessary. The ring is computed from the abutment box edges or from the envelop edges of the overlapping blocs.
An example of this table is given below.

TABLE S2R_BLOC_RING_WIDTH


  RDS_NWELL   6


  RDS_POLY    1.8


  RDS_GATE    1.8


  RDS_ALU1    1.8


  RDS_ALU2    1.8


  RDS_ACTIV   2.4


  RDS_NIMP    1.8


  RDS_PIMP    1.8
END

The normal ring width is the minimum spacing design rule between two segments of the same rds layer.
A zero means that no ring is wanted for that rds layer.

Minimum real layer width design rule: TABLE S2R_MINIMUM_LAYER_WIDTH
This table contains the minimum width of each rds layer. It is used by s2r to avoid creating rectangles below the minimum required, during the merge operation.

TABLE S2R_MINIMUM_LAYER_WIDTH


  RDS_NWELL   6


  RDS_POLY    1.2


  RDS_GATE    1.2


  RDS_ALU1    1.8


  RDS_ALU2    1.8


  RDS_ACTIV   1.2


  RDS_NIMP    2.7


  RDS_PIMP    2.7
END

A zero can be specified, when it is sure that this layer is not to be merged, because not treated by s2r.

Post treatment configuration table: TABLE S2R_POST_TREAT
This table indicates to s2r which rds layers must be post-processed. Precicely if a layer is only to be be translated, or translated and then post-processed. Translated means translate and fit from symbolic to real, and postreated that it should also be merged with its neighbours. For example, it's not necesary to merge cut layers such as RDS_CONT.

TABLE S2R_POST_TREAT


  RDS_NWELL        TREAT NULL


  RDS_PWELL      NOTREAT NULL


  RDS_NDIF       NOTREAT NULL


  RDS_PDIF       NOTREAT NULL


  RDS_NTIE       NOTREAT NULL


  RDS_PTIE       NOTREAT NULL


  RDS_POLY         TREAT NULL


  RDS_GATE         TREAT NULL


  RDS_TPOLY      NOTREAT NULL


  RDS_CONT       NOTREAT NULL


  RDS_ALU1         TREAT NULL


  RDS_TALU1      NOTREAT NULL


  RDS_VIA1       NOTREAT NULL


  RDS_ALU2         TREAT NULL


  RDS_TALU2      NOTREAT NULL


  RDS_VIA2       NOTREAT NULL


  RDS_ALU3       NOTREAT NULL


  RDS_TALU3      NOTREAT NULL


  RDS_ACTIV        TREAT NULL


  RDS_NIMP         TREAT RDS_PIMP


  RDS_PIMP         TREAT RDS_NIMP


  RDS_REF        NOTREAT NULL


  RDS_ABOX       NOTREAT NULL
END

If set to NOTREAT, the first parameter indicates a translation. If set to TREAT, then the layer is translated and then post-treated
To post-process creates problems with the implantation layers. It is possible to have a good symbolic layout (no symbolic design rule errors), and have a resulting layout with DRC violations, created by a poor post-processing. It is due to the fact that these layers do not exist in symbolic, so it is not possible to apply them drc verifications. If two rectangles of these layers are too close (less than a given value), they must be merged. Generally, there is no problem, but when corners are too near it is impossible to merge with the classical algorithm, expand, merge, then shrink.
Rectangles, known as scotches, are created to merge anyway, like this :

+--------+            +--------+           +-----+--+
|////////|            |////////|           |/////|//|
|//+--+//|            |//+--+//|           |//+--|//|
|//|  |//|  gives ->  |//|  |//|     or -> |//|  |//|
|//+--+//|            +-----------+        |//+--|//|
|////////|            |///////////|        |/////|//|
+--------+            +--------+//|        +-----|//|     


    ^    +--------+            |//|-----+        |//+--------+


    |    |////////|            |//|/////|        |///////////|


    o--->|//+--+//|            |//|--+//|        +-----------+


    |    |//|  |//|            |//|  |//|           |//|  |//|
implant  |//+--+//|            |//|--+//|           |//|--+//|


 areas   |////////|            |//|/////|           |//|/////|


         +--------+            +--+-----+           +--+-----+

A N implantation layer should not overlap a P implantation one. We say that P implantations and N implantations are complementary. A scotch will not be created if it intersects with any of the rectangles of the complementary layers.
If a record contains in the second field a rds layer different from NULL, it indicates the complementary layer. This implies that if it is a layer that might need scotches the algorithm will try not to intersect with it when creating scotches.

Extraction graph table: TABLE LYNX_GRAPH
This table gives the connexion graph between the rds layers. For each layer, the list of the connectable layers is written. Up to now, the extractor works only on translated symbolic layout.

TABLE LYNX_GRAPH


  RDS_NDIF RDS_CONT RDS_NDIF


  RDS_PDIF RDS_CONT RDS_PDIF


  RDS_NTIE RDS_CONT RDS_NTIE


  RDS_PTIE RDS_CONT RDS_PTIE


  RDS_POLY RDS_CONT RDS_GATE RDS_POLY


  RDS_GATE RDS_POLY RDS_GATE


  RDS_CONT RDS_PDIF RDS_NDIF RDS_POLY RDS_PTIE RDS_NTIE RDS_ALU1 RDS_CONT


  RDS_ALU1 RDS_CONT RDS_VIA1 RDS_ALU1 RDS_REF


  RDS_REF  RDS_CONT RDS_VIA1 RDS_ALU1 RDS_REF


  RDS_VIA1 RDS_ALU1 RDS_ALU2 RDS_VIA1


  RDS_ALU2 RDS_VIA1 RDS_VIA2 RDS_ALU2


  RDS_VIA2 RDS_ALU2 RDS_ALU3 RDS_VIA2


  RDS_ALU3 RDS_VIA2 RDS_ALU3
END

Extraction capacitance table: TABLE LYNX_CAPA
This table gives the capacitance in picofarad per square lambda of each layer. The extractor computes only substrat capacitances. The capacitances associated with gate or drain or sources are not computed. On the other hand the transistor sizes (area, perimeter) are computed. (This is to ensure compatibility with Spice).

TABLE LYNX_CAPA


  RDS_POLY    1.00e-04


  RDS_ALU1    0.50e-04


  RDS_ALU2    0.25e-04


 
END

Cif translation table: TABLE CIF_LAYER
This table gives the equivalence between internal layers and their representation in the cif file format. A table may look like that (for MOSIS layers):

TABLE CIF_LAYER


  RDS_NWELL   CWN


  RDS_PWELL   CWP


  RDS_ACTIV   CAA


  RDS_NIMP    CSN


  RDS_PIMP    CSP


  RDS_POLY    CPG


  RDS_GATE    CPG


  RDS_CONT    CCA


  RDS_ALU1    CMF


  RDS_VIA1    CVA


  RDS_ALU2    CMS
END

Gds translation table: TABLE GDS_LAYER
This table gives the equivalence between internal layers and there representation in the gds file. A table may look like that (for CMP layers):

TABLE GDS_LAYER


  RDS_NWELL    1


  RDS_POLY    11


  RDS_GATE    11


  RDS_CONT    16


  RDS_ALU1    17


  RDS_VIA1    18


  RDS_ALU2    19


  RDS_ACTIV    2


  RDS_NIMP    12


  RDS_PIMP    14


  RDS_CPAS    20
END

BUG REPORT¶

This tool is under development at the ASIM department of the LIP6 laboratory.
We need your feedback to improve documentation and tools.

October 1, 1997

ASIM/LIP6

Source file:	prol.5.en.gz (from alliance )
Source last updated:	2018-04-20T08:04:52Z
Converted to HTML:	2022-09-07T23:04:53Z