RTCANCONFIG(1) | Xenomai Manual | RTCANCONFIG(1) |
NAME¶
rtcanconfig - Xenomai tool for configuring the CAN controller
SYNOPSIS¶
rtcanconfig <can-interface> [options] [up|down|start|stop|sleep]
DESCRIPTION¶
rtcanconfig is part of Xenomai. It is used to configure the CAN controller. The system must run a suitable Xenomai enabled kernel with the respective module (CAN).
OPTIONS¶
rtcanconfig accepts the following options:
-v, --verbose
-h, --help
-c, --ctrlmode=CTRLMODE
-b, --baudrate=BPS
-B, --bittime=BTR0:BTR1
-B, --bittime=BRP:PROP_SEG:PHASE_SEG1:PHASE_SEG2:SJW:SAM
SEE ALSO¶
rtcanrecv(1), rtcansend(1).
AUTHORS¶
rtcanconfig was written by Wolfgang Grandegger and Sebastian Smolorz. This man page was written by Roland Stigge.
2008/04/19 | Xenomai 2.6.4 |