'\"
'\" Copyright (c) 1991-1994 The Regents of the University of California.
'\" Copyright (c) 1994-1996 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH wish 1 8.0 Tk "Tk Applications"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
wish \- Simple windowing shell
.SH SYNOPSIS
\fBwish\fR ?\fB\-encoding \fIname\fR? ?\fIfileName arg arg ...\fR?
.SH OPTIONS
.IP "\fB\-encoding \fIname\fR" 20
Specifies the encoding of the text stored in \fIfileName\fR.
This option is only recognized prior to the \fIfileName\fR argument.
.IP "\fB\-colormap \fInew\fR" 20
Specifies that the window should have a new private colormap instead of
using the default colormap for the screen.
.IP "\fB\-display \fIdisplay\fR" 20
Display (and screen) on which to display window.
.IP "\fB\-geometry \fIgeometry\fR" 20
Initial geometry to use for window.  If this option is specified, its
value is stored in the \fBgeometry\fR global variable of the application's
Tcl interpreter.
.IP "\fB\-name \fIname\fR" 20
Use \fIname\fR as the title to be displayed in the window, and
as the name of the interpreter for \fBsend\fR commands.
.IP "\fB\-sync\fR" 20
Execute all X server commands synchronously, so that errors
are reported immediately.  This will result in much slower
execution, but it is useful for debugging.
.IP "\fB\-use\fR \fIid\fR" 20
Specifies that the main window for the application is to be embedded in
the window whose identifier is \fIid\fR, instead of being created as an
independent toplevel window.  \fIId\fR must be specified in the same
way as the value for the \fB\-use\fR option for toplevel widgets (i.e.
it has a form like that returned by the \fBwinfo id\fR command).
.RS
Note that on some platforms this will only work correctly if \fIid\fR
refers to a Tk \fBframe\fR or \fBtoplevel\fR that has its
\fB\-container\fR option enabled.
.RE
.IP "\fB\-visual \fIvisual\fR" 20
Specifies the visual to use for the window.
\fIVisual\fR may have any of the forms supported by the \fBTk_GetVisual\fR
procedure.
.IP "\fB\-\|\-\fR" 20
Pass all remaining arguments through to the script's \fBargv\fR
variable without interpreting them.
This provides a mechanism for passing arguments such as \fB\-name\fR
to a script instead of having \fBwish\fR interpret them.
.BE
.SH DESCRIPTION
.PP
\fBWish\fR is a simple program consisting of the Tcl command
language, the Tk toolkit, and a main program that reads commands
from standard input or from a file.
It creates a main window and then processes Tcl commands.
If \fBwish\fR is invoked with arguments, then the first few
arguments, ?\fB\-encoding \fIname\fR? ?\fIfileName\fR?, specify the
name of a script file, and, optionally, the
encoding of the text data stored in that script file.  A value
for \fIfileName\fR is recognized if the appropriate argument
does not start with
.QW \- .
.PP
If there are no arguments, or the arguments do not specify a \fIfileName\fR,
then wish reads Tcl commands interactively from standard input.
It will continue processing commands until all windows have been
deleted or until end-of-file is reached on standard input.
If there exists a file
.QW \fB.wishrc\fR
in the home directory of the user, \fBwish\fR evaluates the file as a
Tcl script just before reading the first command from standard input.
.PP
If arguments to \fBwish\fR do specify a \fIfileName\fR, then
\fIfileName\fR is treated as the name of a script file.
\fBWish\fR will evaluate the script in \fIfileName\fR (which
presumably creates a user interface), then it will respond to events
until all windows have been deleted.
Commands will not be read from standard input.
There is no automatic evaluation of
.QW \fB.wishrc\fR
when the name of a script file is presented on the \fBwish\fR command line,
but the script file can always \fBsource\fR it if desired.
.PP
Note that on Windows, the \fBwish\fIversion\fB.exe\fR program varies
from the \fBtclsh\fIversion\fB.exe\fR program in an additional
important way: it does not connect to a standard Windows console and
is instead a windowed program. Because of this, it additionally
provides access to its own \fBconsole\fR command.
.SH "OPTION PROCESSING"
.PP
\fBWish\fR automatically processes all of the command-line options
described in the \fBOPTIONS\fR summary above.
Any other command-line arguments besides these are passed through
to the application using the \fBargc\fR and \fBargv\fR variables
described later.
.SH "APPLICATION NAME AND CLASS"
.PP
The name of the application, which is used for purposes such as
\fBsend\fR commands, is taken from the \fB\-name\fR option,
if it is specified;  otherwise it is taken from \fIfileName\fR,
if it is specified, or from the command name by which
\fBwish\fR was invoked.  In the last two cases, if the name contains a
.QW /
character, then only the characters after the last slash are used
as the application name.
.PP
The class of the application, which is used for purposes such as
specifying options with a \fBRESOURCE_MANAGER\fR property or .Xdefaults
file, is the same as its name except that the first letter is
capitalized.
.SH "VARIABLES"
.PP
\fBWish\fR sets the following Tcl variables:
.TP 15
\fBargc\fR
Contains a count of the number of \fIarg\fR arguments (0 if none),
not including the options described above.
.TP 15
\fBargv\fR
Contains a Tcl list whose elements are the \fIarg\fR arguments
that follow a \fB\-\|\-\fR option or do not match any of the
options described in \fBOPTIONS\fR above, in order, or an empty string
if there are no such arguments.
.TP 15
\fBargv0\fR
Contains \fIfileName\fR if it was specified.
Otherwise, contains the name by which \fBwish\fR was invoked.
.TP 15
\fBgeometry\fR
If the \fB\-geometry\fR option is specified, \fBwish\fR copies its
value into this variable.  If the variable still exists after
\fIfileName\fR has been evaluated, \fBwish\fR uses the value of
the variable in a \fBwm geometry\fR command to set the main
window's geometry.
.TP 15
\fBtcl_interactive\fR
Contains 1 if \fBwish\fR is reading commands interactively (\fIfileName\fR
was not specified and standard input is a terminal-like
device), 0 otherwise.
.SH "SCRIPT FILES"
.PP
If you create a Tcl script in a file whose first line is
.CS
\fB#!/usr/local/bin/wish\fR
.CE
then you can invoke the script file directly from your shell if
you mark it as executable.
This assumes that \fBwish\fR has been installed in the default
location in /usr/local/bin;  if it is installed somewhere else
then you will have to modify the above line to match.
Many UNIX systems do not allow the \fB#!\fR line to exceed about
30 characters in length, so be sure that the \fBwish\fR executable
can be accessed with a short file name.
.PP
An even better approach is to start your script files with the
following three lines:
.CS
\fB#!/bin/sh
# the next line restarts using wish \e
exec wish "$0" ${1+"$@"}\fR
.CE
This approach has three advantages over the approach in the previous
paragraph.  First, the location of the \fBwish\fR binary does not have
to be hard-wired into the script:  it can be anywhere in your shell
search path.  Second, it gets around the 30-character file name limit
in the previous approach.
Third, this approach will work even if \fBwish\fR is
itself a shell script (this is done on some systems in order to
handle multiple architectures or operating systems:  the \fBwish\fR
script selects one of several binaries to run).  The three lines
cause both \fBsh\fR and \fBwish\fR to process the script, but the
\fBexec\fR is only executed by \fBsh\fR.
\fBsh\fR processes the script first;  it treats the second
line as a comment and executes the third line.
The \fBexec\fR statement cause the shell to stop processing and
instead to start up \fBwish\fR to reprocess the entire script.
When \fBwish\fR starts up, it treats all three lines as comments,
since the backslash at the end of the second line causes the third
line to be treated as part of the comment on the second line.
.PP
The end of a script file may be marked either by the physical end of
the medium, or by the character,
.QW \e032
.PQ \eu001a ", control-Z" .
If this character is present in the file, the \fBwish\fR application
will read text up to but not including the character.  An application
that requires this character in the file may encode it as
.QW \e032 ,
.QW \ex1a ,
or
.QW \eu001a ;
or may generate it by use of commands such as \fBformat\fR or \fBbinary\fR.
.SH PROMPTS
.PP
When \fBwish\fR is invoked interactively it normally prompts for each
command with
.QW "\fB% \fR" .
You can change the prompt by setting the
variables \fBtcl_prompt1\fR and \fBtcl_prompt2\fR.  If variable
\fBtcl_prompt1\fR exists then it must consist of a Tcl script
to output a prompt;  instead of outputting a prompt \fBwish\fR
will evaluate the script in \fBtcl_prompt1\fR.
The variable \fBtcl_prompt2\fR is used in a similar way when
a newline is typed but the current command is not yet complete;
if \fBtcl_prompt2\fR is not set then no prompt is output for
incomplete commands.
.SH "SEE ALSO"
tclsh(1), toplevel(n), Tk_Main(3), Tk_MainLoop(3), Tk_MainWindow(3)
.SH KEYWORDS
application, argument, interpreter, prompt, script file, shell,
toolkit, toplevel