Scroll to navigation

puttygen(1) PuTTY tool suite puttygen(1)


puttygen - public-key generator for the PuTTY tools


puttygen ( keyfile | -t keytype [ -b bits ] [ --primes method ] [ -q ] )
         [ -C new-comment ] [ -P ] [ --reencrypt ]
         [ -O output-type | -l | -L | -p | --dump ] [ -E fptype ]
            [ --ppk-param key=value,... ]
         [ -o output-file ]


puttygen is a tool to generate and manipulate SSH public and private key pairs. It is part of the PuTTY suite, although it can also interoperate with the key formats used by some other SSH clients.

When you run puttygen, it does three things. Firstly, it either loads an existing key file (if you specified keyfile), or generates a new key (if you specified keytype). Then, it optionally makes modifications to the key (such as changing the comment and/or the passphrase); finally, it outputs the key, or some information about the key, to a file.

All three of these phases are controlled by the options described in the following section.


In the first phase, puttygen either loads or generates a key. Note that generating a key requires random data, which can cause puttygen to pause, possibly for some time if your system does not have much randomness available.

The options to control this phase are:

Specify a key file to be loaded. (Use `-' to read a key file from standard input.)

Usually this will be a private key, which can be in the (de facto standard) SSH-1 key format, or in PuTTY's SSH-2 key format, or in either of the SSH-2 private key formats used by OpenSSH and's implementation.

You can also specify a file containing only a public key here. The operations you can do are limited to outputting another public key format or a fingerprint. Public keys can be in RFC 4716 or OpenSSH format, or the standard SSH-1 format.

Specify a type of key to generate. The acceptable values here are rsa, dsa, ecdsa, eddsa, ed25519, and ed448 (to generate SSH-2 keys), and rsa1 (to generate SSH-1 keys).
Specify the size of the key to generate, in bits. Default for rsa and dsa keys is 2048.
Method for generating prime numbers. The acceptable values here are probable (the default), proven, and proven-even; the later methods are slower. (Various synonyms for these method names are also accepted.)

The `probable primes' method sounds unsafe, but it's the most commonly used prime-generation strategy. There is in theory a possibility that it might accidentally generate a number that isn't prime, but the software does enough checking to make that probability vanishingly small (less than 1 in 2^80, or 1 in 10^24). So, in practice, nobody worries about it very much.

The other methods cause PuTTYgen to use numbers that it is sure are prime, because it generates the output number together with a proof of its primality. This takes more effort, but it eliminates that theoretical risk in the probabilistic method.

You might choose to switch from probable to proven primes if you have a local security standard that demands it, or if you don't trust the probabilistic argument for the safety of the usual method.

When generating an RSA key, make sure the prime factors of the key modulus are `strong primes'. A strong prime is a prime number chosen to have a particular structure that makes certain factoring algorithms more difficult to apply, so some security standards recommend their use. However, the most modern factoring algorithms are unaffected, so this option is probably not worth turning on unless you have a local standard that recommends it.
Suppress the progress display when generating a new key.
Specify a file name; the first line will be read from this file (removing any trailing newline) and used as the old passphrase. CAUTION: If the passphrase is important, the file should be stored on a temporary filesystem or else securely erased after use.
Specify device to read entropy from. By default, puttygen uses /dev/urandom, falling back to /dev/random if it has to.

In the second phase, puttygen optionally alters properties of the key it has loaded or generated. The options to control this are:

Specify a comment string to describe the key. This comment string will be used by PuTTY to identify the key to you (when asking you to enter the passphrase, for example, so that you know which passphrase to type).
Indicate that you want to change the key's passphrase. This is automatic when you are generating a new key, but not when you are modifying an existing key.
For an existing private key saved with a passphrase, refresh the encryption without changing the passphrase.

This is most likely to be useful with the --ppk-param option, to change some aspect of the key file's format or encryption.

When saving a PPK file (the default private output type for SSH-2 keys), adjust details of the on-disk format.

Aspects to change are specified as a series of key=value pairs separated by commas. The keys are:

The PPK format version. Possible values are 3 (the default) and 2 (which is less resistant to brute-force decryption, but which you might need if your key needs to be used by old versions of PuTTY tools, or other PPK consumers).

The following keys only affect PPK version 3 files.

The variant of the Argon2 key derivation function to use. Options are argon2id (default, and recommended), argon2i, and argon2d.

You might change this if you consider your exposure to side-channel attacks to be different to the norm.

The amount of memory needed to decrypt the key, in Kbyte. Default is 8192 (i.e., 8 Mbyte).
Approximate time, on this machine, required to attempt decrypting the key, in milliseconds. Default is 100 (ms).
Alternative to time: explicitly specify the number of hash passes required to attempt decrypting the key.
Number of parallelisable threads that can be used to decrypt the key. Default is 1 (force decryption to run single-threaded).

In the third phase, puttygen saves the key or information about it. The options to control this are:

Specify the type of output you want puttygen to produce. Acceptable options are:
Save the private key in a format usable by PuTTY. This will either be the standard SSH-1 key format, or PuTTY's own SSH-2 key format (`PPK'). This is the default.
Save the public key only. For SSH-1 keys, the standard public key format will be used (`1024 37 5698745...'). For SSH-2 keys, the public key will be output in the format specified by RFC 4716, which is a multi-line text file beginning with the line `---- BEGIN SSH2 PUBLIC KEY ----'.
Save the public key only, in a format usable by OpenSSH. For SSH-1 keys, this output format behaves identically to public. For SSH-2 keys, the public key will be output in the OpenSSH format, which is a single line (`ssh-rsa AAAAB3NzaC1yc2...').
Print a fingerprint of the public key. The -E option lets you specify which fingerprinting algorithm to use. All algorithms are believed compatible with OpenSSH.
Save an SSH-2 private key in OpenSSH's format, using the oldest format available to maximise backward compatibility. This option is not permitted for SSH-1 keys.
As private-openssh, except that it forces the use of OpenSSH's newer format even for RSA, DSA, and ECDSA keys.
Save an SSH-2 private key in's format. This option is not permitted for SSH-1 keys.
Save a textual dump of the numeric components comprising the key (both the public and private parts, if present). Useful for debugging, or for using PuTTYgen as a key generator for applications other than SSH.

The output consists of a series of name=value lines, where each value is either a C-like string literal in double quotes, or a hexadecimal number starting with 0x...

If no output type is specified, the default is private.

Specify the file where puttygen should write its output. If this option is not specified, puttygen will assume you want to overwrite the original file if the input and output file types are the same (changing a comment or passphrase), and will assume you want to output to stdout if you are asking for a public key or fingerprint. Otherwise, the -o option is required.
Synonym for `-O fingerprint'.
Synonym for `-O public-openssh'.
Synonym for `-O public'.
Synonym for `-O text'.
Specify the algorithm to use if generating a fingerprint. The options are sha256 (the default) and md5.
Specify a file name; the first line will be read from this file (removing any trailing newline) and used as the new passphrase. If the file is empty then the saved key will be unencrypted. CAUTION: If the passphrase is important, the file should be stored on a temporary filesystem or else securely erased after use.

The following options do not run PuTTYgen as normal, but print informational messages and then quit:

Display a message summarizing the available options.
Display the version of PuTTYgen.
Display the fingerprints of the PuTTY PGP Master Keys, to aid in verifying new files released by the PuTTY team.


To generate an SSH-2 RSA key pair and save it in PuTTY's own format (you will be prompted for the passphrase):

puttygen -t rsa -C "my home key" -o mykey.ppk

To generate a larger (4096-bit) key:

puttygen -t rsa -b 4096 -C "my home key" -o mykey.ppk

To change the passphrase on a key (you will be prompted for the old and new passphrases):

puttygen -P mykey.ppk

To change the comment on a key:

puttygen -C "new comment" mykey.ppk

To convert a key into OpenSSH's private key format:

puttygen mykey.ppk -O private-openssh -o my-openssh-key

To convert a key from another format (puttygen will automatically detect the input key type):

puttygen -o mykey.ppk

To display the SHA-256 fingerprint of a key (some key types require a passphrase to extract even this much information):

puttygen -l mykey.ppk

To add the OpenSSH-format public half of a key to your authorised keys file:

puttygen -L mykey.ppk >> $HOME/.ssh/authorized_keys
2004‐03‐24 PuTTY tool suite