.\" Text automatically generated by txt2man
.TH BS11_CONFIG 1 "17 March 2022" "" ""
.SH NAME
\fBbs11_config \fP- Configuration of BS-11 BTS via RS232
\fB
.SH SYNOPSIS
.nf
.fam C
\fBbs11_config\fP [\fIoptions\fP] [\fIcommand\fP]

.fam T
.fi
.fam T
.fi
.SH DESCRIPTION
\fBbs11_config\fP is a small commandline program that can be used to configure the BS-11? BTS using its RS232 link.
.PP
It can perform a subset of the functions that are typically performed using the Siemens LMT (Local Maintenance Terminal) software, such as
.RS
.TP
.B
-
querying some essential configuration values
.TP
.B
-
creating and deleting TRX1 objects
.TP
.B
-
download of SAFETY LOAD software
.TP
.B
-
download of BTS software
.TP
.B
-
creating an initial configuration (such as creating BBSIG,CCLK,PA,\.\.\. objects)
.TP
.B
-
setting the Tx output power of the RF amplifier 
.RE
.PP
It is part of the OpenBSC base station controller software from Osmocom.
.SH OPTIONS
.TP
.B
\fB-h\fP,\fB--help\fP
Print this help text
.TP
.B
\fB-p\fP,\fB--port\fP </dev/ttyXXX>
Specify serial port
.TP
.B
\fB-s\fP,\fB--software\fP <file>
Specify Software file
.TP
.B
\fB-S\fP,\fB--safety\fP <file>
Specify Safety Load file
.TP
.B
\fB-d\fP,\fB--delay\fP <ms>
Specify delay in milliseconds
.TP
.B
\fB-D\fP,\fB--disconnect\fP
Disconnect BTS from BSC
.TP
.B
\fB-w\fP,\fB--win-size\fP <num>
Specify Window Size
.TP
.B
\fB-f\fP,\fB--forced\fP
Force Software Load
.SH SUPPORTED COMMANDS
.TP
.B
query
Query the BS-11 about serial number and configuration
.TP
.B
disconnect
Disconnect A-bis link (go into administrative state)
.TP
.B
resconnect
Reconnect A-bis link (go into normal state)
.TP
.B
restart
Restart the BTS
.TP
.B
software
Download Software (only in administrative state)
.TP
.B
create-trx1
Create objects for TRX1 (Danger: Your BS-11 might overheat)
.TP
.B
delete-trx1
Delete objects for TRX1
.TP
.B
pll-e1-locked
Set the PLL to be locked to E1 clock
.TP
.B
pll-standalone
Set the PLL to be in standalone mode
.TP
.B
pll-setvalue <value>
Set the PLL set value
.TP
.B
pll-workvalue <value>
Set the PLL work value
.TP
.B
oml-tei
Set OML E1 TS and TEI
.TP
.B
bport0-star
Set BPORT0 line config to star
.TP
.B
bport0-multidrop
Set BPORT0 line config to multidrop
.TP
.B
bport1-multidrop
Set BPORT1 line config to multidrop
.TP
.B
create-bport1
Create BPORT1 object
.TP
.B
delete-bport1
Delete BPORT1 object
.RE
.PP

.SH SEE ALSO
\fBisdnsync\fP(1), \fBosmo-bsc\fP(1)
.SH AUTHOR
This manual page was written by Ruben Undheim <ruben.undheim@gmail.com> for the Debian project (and may be used by others).
.RE
.PP