.\" Man page contributed by Dirk Eddelbuettel .\" and released under the BSD license .\" Copyright (c) 2008 Sun Microsystems, Inc. All rights reserved. .\" Copyright (c) 2014 Cisco Systems, Inc. All rights reserved. .TH OMPI_INFO 1 "Sep 30, 2023" "4.1.6" "Open MPI" .SH NAME ompi_info - Display information about the Open MPI installation . .\" ************************** .\" Synopsis Section .\" ************************** .SH SYNOPSIS .B ompi_info [options] . .\" ************************** .\" Description Section .\" ************************** .SH DESCRIPTION .PP .B ompi_info provides detailed information about the Open MPI installation. It can be useful for at least three common scenarios: .PP 1. Checking local configuration and seeing how Open MPI was installed. .PP 2. Submitting bug reports / help requests to the Open MPI community (see .IR http://www.open-mpi.org/community/help/ ) .PP 3. Seeing a list of installed Open MPI plugins and querying what MCA parameters they support. .PP .B NOTE: .B ompi_info defaults to only showing a few MCA parameters by default (i.e., level 1 parameters). Use the .B --level option to enable showing more options (see the LEVELS section for more information). . .\" ************************** .\" Options Section .\" ************************** .SH OPTIONS .B ompi_info accepts the following options: .TP 8 .I \-a|\-\-all Show all configuration options and MCA parameters. Also changes the default MCA parameter level to 9, unless .I --level is also specified. .TP 8 .I \-\-arch Show architecture on which Open MPI was compiled. .TP 8 .I \-c|\-\-config Show configuration options .TP 8 .I \-gmca|\-\-gmca Pass global MCA parameters that are applicable to all contexts. .TP 8 .I \-h|\-\-help Shows help / usage message. .TP 8 .I \-\-hostname Show the hostname on which Open MPI was configured and built. .TP 8 .I \-\-internal Show internal MCA parameters (not meant to be modified by users). .TP 8 .I \-\-level Show only variables with at most this level (1-9). The default is 1 unless \-\-all is specified without \-\-level, in which case the default is 9. See the LEVELS section for more information. .TP 8 .I \-mca|\-\-mca Pass context-specific MCA parameters; they are considered global if --gmca is not used and only one context is specified. .TP 8 .I \-\-param Show MCA parameters. The first parameter is the type of the component to display; the second parameter is the specific component to display (or the keyword "all", meaning "display all components of this type"). .TP 8 .I \-t|\-\-type Show MCA parameters of the type specified in the parameter. Accepts the following parameters: unsigned_int, unsigned_long, unsigned_long_long, size_t, string, version_string, bool, double. By default level is 1 unless it is specified with \-\-level. .TP 8 .I \-\-parsable When used in conjunction with other parameters, the output is displayed in a machine-parsable format .I \-\-parseable Synonym for --parsable .TP 8 .I \-\-path Show paths that Open MPI was configured with. Accepts the following parameters: prefix, bindir, libdir, incdir, pkglibdir, sysconfdir. .TP 8 .I \-\-pretty When used in conjunction with other parameters, the output is displayed in 'prettyprint' format (default) .TP 8 .I \-\-selected-only Show only variables from selected components. .TP 8 .I \-V|\-\-version Show version of Open MPI. . .\" ************************** .\" Levels Section .\" ************************** .SH LEVELS Open MPI has many, many run-time tunable parameters (called "MCA parameters"), and usually only a handfull of them are useful to a given user. . . .PP As such, Open MPI has divided these parameters up into nine distinct levels, broken down into three categories, each with three sub-categories. . . .PP Note that since each MCA parameter is accessible through the MPI_T control variable API (introduced in MPI-3.0), these levels exactly correspond to the nine MPI_T cvar levels. . . .PP The three categories are: .TP 4 .B End user Generally, these are parameters that are required for correctness, meaning that a user may need to set these just to get their MPI application to run correctly. For example, BTL "if_include" and "if_exclude" parameters fit into this category. . .TP .B Application tuner Generally, these are parameters that can be used to tweak MPI application performance. This even includes parameters that control resource exhaustion levels (e.g., number of free list entries, size of buffers, etc.), and could be considered "correctness" parameters if they're set too low. But, really -- they're tuning parameters. . .TP .B Open MPI developer Parameters in this category either don't fit in the other two, or are specifically intended for debugging / development of Open MPI itself. . . .PP And within each category, there are three sub-categories: .TP 4 .B Basic This sub-category is for parameters that everyone in this category will want to see -- even less-advanced end users, application tuners, and new OMPI developers. . .TP .B Detailed This sub-category is for parameters that are generally useful, but users probably won't need to change them often. . .TP .B All This sub-category is for all other parameters. Such parameters are likely fairly esoteric. . . .PP Combining the categories and sub-categories, here's how Open MPI defines all nine levels: .TP 4 1 Basic information of interest to end users. .TP 2 Detailed information of interest to end users. .TP 3 All remaining information of interest to end users. .TP 4 Basic information required for application tuners. .TP 5 Detailed information required for application tuners. .TP 6 All remaining information required for application tuners. .TP 7 Basic information for Open MPI implementors. .TP 8 Detailed information for Open MPI implementors. .TP 9 All remaining information for Open MPI implementors. . . .PP By default, .B ompi_info only shows level 1 MCA parameters. To see more MCA parameters, use the .B --level command line option. . . .PP .\" ************************** .\" Examples Section .\" ************************** .SH EXAMPLES .TP 4 ompi_info Show the default output of options and listing of installed components in a human-readable / prettyprint format. . . .TP ompi_info --parsable Show the default output of options and listing of installed components in a machine-parsable format. . . .TP ompi_info --param btl tcp Show the level 1 MCA parameters of the "tcp" BTL component in a human-readable / prettyprint format. . . .TP ompi_info --param btl tcp --level 6 Show the level 1 through level 6 MCA parameters of the "tcp" BTL component in a human-readable / prettyprint format. . . .TP ompi_info --param btl tcp --parsable Show the level 1 MCA parameters of the "tcp" BTL component in a machine-parsable format. . . .TP ompi_info --type string --pretty-print --level 3 Show the level 3 MCA parameters of string type in a human-readable / prettyprint format. . . .TP ompi_info --path bindir Show the "bindir" that Open MPI was configured with. . . .TP ompi_info --version Show the version of Open MPI version numbers in a prettyprint format. . . .TP ompi_info --all Show .I all information about the Open MPI installation, including all components that can be found, all the MCA parameters that they support (i.e., levels 1 through 9), versions of Open MPI and the components, etc. . . .\" ************************** .\" Authors Section .\" ************************** .SH AUTHORS The Open MPI maintainers -- see .I http://www.openmpi.org/ or the file .IR AUTHORS . .PP This manual page was originally contributed by Dirk Eddelbuettel , one of the Debian GNU/Linux maintainers for Open MPI, and may be used by others.