'\" t
.\"     Title: upsstats.html
.\"    Author: [FIXME: author] [see http://www.docbook.org/tdg5/en/html/author]
.\" Generator: DocBook XSL Stylesheets vsnapshot <http://docbook.sf.net/>
.\"      Date: 01/11/2024
.\"    Manual: NUT Manual
.\"    Source: Network UPS Tools 2.8.1
.\"  Language: English
.\"
.TH "UPSSTATS\&.HTML" "5" "01/11/2024" "Network UPS Tools 2\&.8\&.1" "NUT Manual"
.\" -----------------------------------------------------------------
.\" * Define some portability stuff
.\" -----------------------------------------------------------------
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.\" http://bugs.debian.org/507673
.\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html
.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.ie \n(.g .ds Aq \(aq
.el       .ds Aq '
.\" -----------------------------------------------------------------
.\" * set default formatting
.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
.\" -----------------------------------------------------------------
.\" * MAIN CONTENT STARTS HERE *
.\" -----------------------------------------------------------------
.SH "NAME"
upsstats.html \- HTML template for Network UPS Tools upsstats
.SH "DESCRIPTION"
.sp
This file is used by \fBupsstats.cgi\fR(8) to generate status pages\&. Certain commands are recognized, and will be replaced with various status elements on the fly\&.
.SH "FORMATTING"
.sp
Commands can be placed anywhere on a line, but must start and end with @\&. Any extra characters before or after the commands will be passed through unchanged\&. It is allowed to use more than one command on a single line, as long as each command has its own start and end character\&. If you need to use the @ sign, use @ to prevent it from being treated as a start character\&.
.SH "BLOCK CONTROL"
.sp
Some commands begin blocks \- sections of the template that will be included, excluded, or repeated depending on certain parameters\&.
.SS "BLOCK CONTROL \- ITERATION"
.PP
\fB@FOREACHUPS@\fR
.RS 4
Starts a block that will be repeated for each MONITOR directive in the
\fBhosts.conf\fR(5)\&. This is how you can generate pages that monitor all of your systems simultaneously\&.
.RE
.PP
\fB@ENDFOR@\fR
.RS 4
Ends a FOREACHUPS block\&.
.RE
.SS "BLOCK CONTROL \- MATCHING SPECIFIC CASES"
.PP
\fB@IFSUPP \fR\fB\fIvar\fR\fR@*
.RS 4
Starts a block that will only be printed if the variable var is supported by the current UPS\&. This is generally used to suppress "not supported" messages by avoiding the label and variable call entirely\&.
.RE
.PP
\fB@IFEQ\fR \fIvar\fR \fIvalue\fR\fB@\fR
.RS 4
Starts a block if the value returned from the variable
\fIvar\fR
matches
\fIvalue\fR\&.
.RE
.PP
\fB@IFBETWEEN\fR \fIvarlow\fR \fIvarhigh\fR \fIvarvalue\fR\fB@\fR
.RS 4
Starts a block if the value returned by the variable
\fIvarvalue\fR
is between the values returned by the variables
\fIvarlow\fR
and
\fIvarhigh\fR\&.
.RE
.PP
\fB@ELSE@\fR
.RS 4
If the previous IF\-command did not match, perform this instead\&.
.RE
.PP
\fB@ENDIF@\fR
.RS 4
Ends an IF/ELSE\-block\&.
.RE
.SS "BLOCK CONTROL \- ADVANCED EXPRESSIONS"
.sp
Even though the parser is pretty limited, it\(cqs still possible to create rather advanced expressions\&. The key to this is the fact that multiple block control commands are AND:ed\&. This is illustrated with an example (more examples are available in upsstats\&.html)\&.
.sp
.if n \{\
.RS 4
.\}
.nf
@IFSUPP ambient\&.humidity@
@IFSUPP ambient\&.temperature@
This UPS knows both ambient temperature and humidity\&.
@ELSE@
@IFSUPP ambient\&.humidity@
This UPS only knows ambient humidity\&.
@ELSE@
@IFSUPP ambient\&.temperature@
This UPS only knows ambient temperature\&.
@ELSE@
This UPS knows nothing, how annoying\&.
@ENDIF@
.fi
.if n \{\
.RE
.\}
.SH "OTHER COMMANDS"
.PP
\fB@AMBTEMP@\fR
.RS 4
Insert the ambient temperature in the current temperature scale\&.
.RE
.PP
\fB@DATE\fR \fIformat\fR\fB@\fR
.RS 4
Insert the current date and time\&. The format string is passed to strftime, so almost anything is possible\&. See
\fBstrftime\fR(3) for possible values\&.
.RE
.PP
\fB@DEGREES@\fR
.RS 4
Insert the entity for degrees (\(de) and either C or F depending on the current temperature scale\&.
.RE
.PP
\fB@HOST@\fR
.RS 4
Insert the designation of the host being monitored, like
myups@localhost\&.
.RE
.PP
\fB@HOSTDESC@\fR
.RS 4
Insert the host\(cqs description from
\fBhosts.conf\fR(5)\&.
.RE
.PP
\fB@HOSTLINK@\fR
.RS 4
Insert a link to upsstats\&.cgi with the "host" variable set to the current UPS\&. This is only useful within a FOREACHUPS block\&.
.RE
.PP
\fB@IMG\fR \fIvarname\fR \fB@\fR
.RS 4
Insert an IMG SRC to
\fBupsimage.cgi\fR(8)
for one of these status variables:
.PP
battery\&.charge
.RS 4
Battery charge \- a percentage
.RE
.PP
battery\&.voltage
.RS 4
The charge on the battery in volts
.RE
.PP
input\&.frequency
.RS 4
Incoming utility frequency (Hz)
.RE
.PP
input\&.voltage
.RS 4
Incoming utility voltage
.RE
.PP
input\&.L1\-L2\&.voltage
.RS 4
Incoming voltage, L1\-L2 (3phase)
.RE
.PP
input\&.L2\-L3\&.voltage
.RS 4
Incoming voltage, L2\-L3 (3phase)
.RE
.PP
input\&.L3\-L1\&.voltage
.RS 4
Incoming voltage, L3\-L1 (3phase)
.RE
.PP
output\&.frequency
.RS 4
Outgoing utility frequency (Hz)
.RE
.PP
output\&.voltage
.RS 4
Outgoing voltage (from the UPS)
.RE
.PP
output\&.L1\-L2\&.voltage
.RS 4
Outgoing voltage, L1\-L2 (3phase)
.RE
.PP
output\&.L2\-L3\&.voltage
.RS 4
Outgoing voltage, L2\-L3 (3phase)
.RE
.PP
output\&.L3\-L1\&.voltage
.RS 4
Outgoing voltage, L3\-L1 (3phase)
.RE
.PP
output\&.L1\&.power\&.percent
.RS 4
UPS load, L1 (3phase)
.RE
.PP
output\&.L2\&.power\&.percent
.RS 4
UPS load, L2 (3phase)
.RE
.PP
output\&.L3\&.power\&.percent
.RS 4
UPS load, L3 (3phase)
.RE
.PP
ups\&.load
.RS 4
UPS load \- percentage
.RE
.PP
ups\&.temperature
.RS 4
UPS temperature
.RE
.RE
.sp
\fIextra\fR is where you can put additional definitions\&. Right now the valid definitions are colors for various parts of the bars drawn by upsimage\&.cgi\&. Possible color names are:
.PP
back_col
.RS 4
background color
.RE
.PP
scale_num_col
.RS 4
scale number color
.RE
.PP
summary_col
.RS 4
summary color (number at the bottom)
.RE
.PP
ok_zone_maj_col
.RS 4
major scale color for the normal ("ok") zone
.RE
.PP
ok_zone_min_col
.RS 4
minor scale color for the normal ("ok") zone
.RE
.PP
neutral_zone_maj_col
.RS 4
major scale color for the neutral zone
.RE
.PP
neutral_zone_min_col
.RS 4
minor scale color for the neutral zone
.RE
.PP
warn_zone_maj_col
.RS 4
major scale color for the warning zone
.RE
.PP
warn_zone_min_col
.RS 4
minor scale color for the warning zone
.RE
.PP
bar_col
.RS 4
the color of the bar in the middle
.RE
.sp
All colors are hex triplets \- 0xff0000 is red, 0x00ff00 is green, and 0x0000ff is blue\&.
.sp
Examples:
.sp
.if n \{\
.RS 4
.\}
.nf
@IMG battery\&.charge@
@IMG battery\&.charge back_col=0xff00ff bar_col=0xaabbcc@
@IMG input\&.voltage ok_zone_maj_col=0x123456@
.fi
.if n \{\
.RE
.\}
.PP
\fB@REFRESH@\fR
.RS 4
Insert the META header magic for refreshing the page if that variable has been set by the browser\&. This needs to be in the HEAD section of the page\&.
.RE
.PP
\fB@STATUS@\fR
.RS 4
Expand the abbreviations in the ups\&.status variable \- OL becomes "On line", OB becomes "On battery", and so on\&.
.RE
.PP
\fB@STATUSCOLOR@\fR
.RS 4
Insert red, green, or yellow color triplets depending on the severity of the current UPS status\&. Normal operations are green, warnings like voltage trim/boost or "off" are yellow, and other events like being on battery or having a low battery are red\&.
.RE
.PP
\fB@VAR\fR \fIvarname\fR\fB@\fR
.RS 4
Insert the current value of the status variable varname on the host being monitored, or "Not supported"\&.
.RE
.PP
\fB@RUNTIME@\fR
.RS 4
Inserts the current runtime, in
hh:mm:ss
format\&.
.RE
.PP
\fB@TEMPC@\fR
.RS 4
Use the Celsius scale for temperature data (default)\&.
.RE
.PP
\fB@TEMPF@\fR
.RS 4
Use the Fahrenheit scale for temperature data\&.
.RE
.PP
\fB@UPSTEMP@\fR
.RS 4
Insert the UPS temperature in the current scale\&.
.RE
.PP
\fB@BATTTEMP@\fR
.RS 4
Insert the battery temperature in the current scale\&.
.RE
.PP
\fB@UTILITYCOLOR@\fR
.RS 4
Obsoleted\&. Use IFBETWEEN instead (see example in upsstats\&.html)\&.
.RE
.PP
\fB@VERSION@\fR
.RS 4
Insert the version number of the software\&.
.RE
.SH "OTHER TEMPLATES"
.sp
\fBupsstats.cgi\fR(8) will also open a file called upsstats\-single\&.html if you call it with "host=" set in the URL\&. That file uses the same rules and techniques documented here\&.
.SH "SEE ALSO"
.sp
\fBupsstats.cgi\fR(8), \fBupsimage.cgi\fR(8)
.SS "Internet resources:"
.sp
The NUT (Network UPS Tools) home page: https://www\&.networkupstools\&.org/